EzVIEW™ Baby Monitor User Manual SEW-3022 If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product. SEW-3022-ENGLISH.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the AC adapters provided with the product, as other adapters may damage the product.
Getting Started What’s Included The system comes with the following components: Features • Samsung’s digital wireless technology provides excellent image quality and clarity. • Virtually eliminates interference using a secure and private signal • Up to 350ft (about 100m) wireless open space transmission range. The actual range may vary depending on the use environment.
Getting to know your Monitoring system Wireless Receiver Front & Back Controls Speaker Receives and sends signals from or to the camera. Produces the sound transmitted from the camera(s). 2.4” LCD Screen Displays video from the camera. Navigation Controls/ Belt Clip SEW-3022 Button Use the controls to move and select while in Viewing Mode and Menu Mode. Play Press to go to "File List" if Micro SD card is inserted. MENU Button Press to access the receiver menu. Press the button again to exit.
Side Controls Talk Button Night Light Button Press down and hold the button to talk back to the camera currently being displayed on the LCD screen. Press to remotely turn on/off the night light on the camera (for the camera currently being displayed on the LCD screen). When the night light is on, an indication icon will be displayed on the LCD screen. A/M record Receiver ON and low battery indication Press to auto record or manual record during monitoring.
Front & Back Controls Camera Antenna Sends & receives signals to or from the receiver. Charging Indication LED LED is off when there is no rechargeable battery inside the camera base; the LED is red when the rechargeable battery pack is charging; the LED turns off when the rechargeable battery is fully charged. n ` ` ` Temperature Sensor Sense the air temperature where the camera is placed. Pairing Button The pairing button is located on the back of the camera behind by the stand mount.
To Use The Battery Mode You can use the battery to power the camera if it’s distant from the power source or if you want to carry the camera. n ` This camera has built-in IR LED’s, which provides the camera with the ability to view images in no/low light conditions. It is important to use the provided power adapter (and not the batteries) when using the camera for prolonged periods in low light conditions, as the built-in IR LED’s will deplete the battery more quickly than regular daytime use. 1.
Installation How to Install 1. 2. Caution if you use the system to watch a young child, do not place the camera where the child can reach. Place the receiver in a place that will have clear reception with your camera(s). 2. Pull out the stand. n ` Do not pull up the stand lever with an excessive force. Otherwise, it may be broken. n 3. The camera can also be placed on a flat surface, such as a table or shelf, and no mounting hardware is required.
Night light Press [ ] on the wireless receiver to remotely turn on/off the nightlight on the wireless camera currently being displayed. An indicator light will be visible if on. Viewing Mode Display Wireless Receiver Auto Mute If you set Auto Mute to , the applicable message appears on the screen. SEW-3022 Micro SD card status Indicates when a Micro SD card is inserted. It indicates that micro SD card get full capacity when the icon is red,and card has some spaces when icon is white.
Menu Operation After selected time, the monitor will go to a select screen saver or black screen if blank is selected as the screen saver. Power Saving mode will be deactivated by pushing [A], [M] or [SLEEP] on the front panel of monitor or by higher sound detected by cameras. If Power Saving mode is deactivated by pushing [A], [M] and [SLEEP], the monitor will go back to black screen after the time you set if there is no sound trigger during that time.
Date Setting Sets the year, month, date value to show in the monitor screen. Date Format Sets the date format to show in the monitor screen. Time Setiing Sets the time value with hour, minute to show in the monitor screen. Pairing You can register a wireless camera with the receiver using the registration menu where you can view the video of the selected wireless camera. Pairing The system comes with a camera that has already been paired with the receiver unit.
Appendix Specifications Selecting a Memory Card For Video Recording Selecting a Memory Card For Video Recording Your Samsung BabyVIEW™ baby monitor supports MicroSD memory cards. You may experience compatibility issues depending on the model and maker of the memory card. For your Samsung BabyVIEW baby monitor, we recommend you use a MicroSD memory card from the following manufacturers: Sandisk® and Kingston®.
Troubleshooting Problem Solution The monitor beeps or vibrates for no apparent reason The unit may be beeping or vibrating because the sound sensitivity on the camera is too high. No picture from a camera 1. 2. 3. 4. 5. 1. Try lowering the sound alarm trigger on the camera (shown on page 6) to an appropriate sensitivity level. Check all connections to the camera. Make sure the adapter is plugged in. Make sure that the cameras and receiver are both ON.
67mm [2.6 inch] TEMPLATE Screw holes for the Camera installation This template is used to install the camera on the wall. CAMERA FRONT SEW-3022-ENGLISH.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungsv.com SEW-3022-ENGLISH.indd 16 SAMSUNG TECHWIN EUROPE LTD.
