User Manual

Using the Operator Panel
2.2
READY Button
When the lamp lights up, the system is ready to
use. To turn the system on or off, use the READY
button.
CARTRIDGE Button
Use to replace the cartridge. It moves the cartridge
carrier to install position.
FF/STOP Button
Use to load a sheet of paper to the first print line
or eject a sheet of paper from the printer (Form
Feed). Or Use to stop current operation.
START/COPY Button
Use to start a job.
on
Lamp Status Description
Ready for use (Standby mode). FAX mode is chosen to receive a fax
automatically. If you change the receive mode to TEL (manual
receiving) through the SmartFAX (see page 2.43), the SCAN/FAX
lamp is off in Standby mode.
Prints data.
Uploads the scanned data to the computer. Or, sends or receives a
fax.
Waits the next document to be inserted. Or there is no document. It
also indicates the document jam (see page 3.13).
Ready to replace cartridge, or improper cartridge install.
off blinking
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
READY
BUSY SCAN/FAX
For the error lamp status, see page 3.13.
04-Print 2/5/99 10:05 AM Page 2