User Manual

Setting User Options
The SmartFAX allows you to specify user-selectable features for faxing and
copying.
Selectable Options
Terminal ID
Your number and name. The terminal ID will be printed at the top of each
page faxed from your machine.
Receive Mode
You can select manual or automatic receiving mode. For automatic
receiving, select FAX. For manual receiving, select TEL.
Document Resolution
You can select Standard, or Fine for the document resolution default
setting. The resolution setting will be applied when you send a fax using
the extension phone connected to your SmartJet to dial a fax number.
Paper Size
You can select the paper size to use for printing a received fax or copy.
Select A4, Letter, or Legal.
TX Confirmation Report
This report shows whether the transmission was successful or not, how
many pages were sent, etc.
¥ Select On to print the report automatically each time you send a fax.
¥ Select Off. The report will not print out automatically.
¥ Select On-Error to print only when an error occurs and the transmission
was not successful.
Print Quality
Select LQ to print a fax in low speed with high quality. If you select Draft,
the machine prints in high speed with low quality. To maintain the best
possible print quality in Draft mode, You need to align the cartridge from
the control Program on your printer driver.
Dial Mode
Select the type of dial mode; Tone or Pulse.
2.42
Faxing and Copying
06-Copy&Fax 2/5/99 9:45 AM Page 18