User Manual

6.6
Troubleshooting
Display Meaning Solution
PAPER JAM 2
POLLING ERROR
POWER FAILURE
WARMING UP
Jammed paper still remains
inside the unit.
Clear the jam.
The remote fax machine you
want to poll is not ready to
respond to your poll.
Or
When setting up to poll another
fax machine, you have used an
incorrect poll code.
The remote operator should know
in advance that you are polling
and have their fax unit loaded
with the original document.
Enter the correct poll code.
A power failure has occurred.
If documents have been stored in
the memory, a ‘Power Failure
Report’ will be printed auto-
matically when the power is
restored.
The printer is warming up and
is off-line.
The toner cartridge has run out.
The machine stops.
Replace with a new toner
cartridge.
Wait until the printer is on-line.
TONER LOW
TONER EMPTY
The toner is almost empty.
Take out the toner cartridge and
gently shake it. By doing this,
you can temporarily re-establish
printing operations.
RETRY REDIAL ?
The machine is waiting for a
specified time interval to redial
a previously busy station.
You can press
Start/Enter to
immediately redial, or
Stop to
cancel the redial operation.
RECEIVE ERROR
A fax has not been received
successfully.
A problem with the facsimile
communications has occurred.
Try again.
SEND ERROR
Your fax has not gone through
successfully.
A problem with the facsmile
communications has occurred.
Ask the sender to try again.
CHECK PAPER
PRESS START
Recording paper has jammed in
the paper feeding area or no
paper
When paper is loading, clear
paper jam and press start key.
If paper is empty, press the start
key after loading paper.