Spec Sheet

ManualsBrandsSamsung ManualsNDAAFiber Media Converter 100Mbps, SC, Multi Mode

FEATURES

›I nterchangeable SFP for fiber type, distance and connector

› I EEE 802.3 compliant

› Conforms to (SFP) Small Form-Factor Pluggable Multi-Source Agreement (MSA)

› Operating temperature: -40˚ C

to +75˚ C

› Storage temperature: -40˚ C to +85˚ C

› No in-field adjustments required

The selection of MSA Compliant Small Form-Factor Pluggable (SFP) modules allows

for an optical or electrical interface when using a managed switch, unmanaged switch

or media converter. These interchangeable SFP modules are available for use with

copper media, multimode optical fiber, or single mode optical fiber. The optical fiber

SFP modules are available in Fast Ethernet one and two fiber versions and Gigabit

Ethernet one and two fiber versions. They also are available with LC or SC optical

connectors. The SFP modules offer different wavelengths and optical power budget to

allow distances up to 20 kilometers. These SFP modules are industrially rated to

perform in the most difficult operating environments.

Small Form-Factor Pluggable (SFP)

Copper and Optical Fiber Transceivers

SFP Modules

Model Number Speed (Mbps)

Transmission

Medium

TX λ

(nm)

RX λ

(nm) Max. Path Length

TX Power

(dBm)

RX Sensitivity

(dBm)

Opt. Loss

Budget (dBm)

Number

of Fibers Connector

SFP-GRJC 1000 Copper N/A N/A IEEE 802.3 N/A N/A N/A N/A RJ45

SFP-FLCM202 100 Multimode 1310 1310 2 km -19 ≤-30 11 2 LC

SFP-FLCS220 100 -15 ≤-31 16 2 LC

SFP-FSCM102-A 100 -15 ≤-30 15

1 SC

SFP-FSCM102-B 100 -15 ≤-30 15 1 SC

SFP-FSCS120-A 100 -15 ≤-34 19 1 SC

SFP-FSCS120-B 100 -15 ≤-34 19 1 SC

SFP-GLCS215 1000 -8 ≤-24 16

SFP-GLCS120-A 1000 -8 ≤-22 14 1 LC

SFP-GLCS120-B 1000 -8 ≤-22 14 1 LC

SFP-GLCM202

1000

Single Mode 1310 1310 20 km

Multimode

1310 1550 2

Multimode 1550

1310

2 km

Single M

ode 1310

Single Mode 1550

Single Mode 1310

Single Mode 1550

Multimode 1310

550 20 km

1310 20 km

1550 15 km

1550 20 km

1310 20 km

1310 2 km

-10 ≤-18 8 2 LC

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode

fiber needs to meet or exceed fiber standard ITU-T G.652.

Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.

In a continuing effort to improve and advance technology, product specifications are subject to change without notice.

GENCY COMPLIANCE

SPECIFICATIONS AND ORDERING INFORMATION