User's Manual

132
• Advanced settings : (touch ) allows you to configure some of
the IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class.
– Static IP : specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
– Local phone IP : enter the IP address obtained from the network
operator, if you checked the Static IP option.
– Static DNS : specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Server 1/Server 2 : enter the Domain Name Server (DNS) addresses.
– Traffic class : select the traffic class.
3. Touch Save to save these settings.
The WAP settings may vary depending on the service provider.
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection. Unlike infrared, you
do not need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you
can exchange information between them, even if they are located
in different rooms. The following Bluetooth options are available:
Activation
1. From Idle mode, touch ➔ Bluetooth .
– or –
Touch ➔ Settings ➔ Connectivity ➔ Bluetooth .
2. Touch the Phone icon to activate Bluetooth.
– or –
Touch to deactivate Bluetooth.
Device Name
1. Touch ➔ Bluetooth ➔ My info .
2. Touch the Name field, touch and hold to erase the
current name.
Menu
Menu
Bluetooth Inactive Bluetooth Active
Menu
a817 Blink.book Page 132 Monday, October 4, 2010 10:03 AM