User's Manual

Connections 135
• Mass storage : allows you to utilize the onboard storage capacity of
the phone’s microSD card to store and upload files. This option
allows your computer to detect the phone’s microSD card as a
removable storage drive.
3. Touch Save .
Network Profile Configuration
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made by one of three available
WAP browsers: MEdia Net, AT&T MMS (Multi-Media Server), and
AT&T IMS. You need these settings to use the web browser or
send MMS messages or emails.
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1. Touch ➔ Settings ➔ Connectivity ➔ Network profiles .
2. Touch one of these options:
• MEdia Net
• AT&T MMS
• AT&T IMS
Note: The MEdia Net WAP and AT&T MMS are pre-configured and cannot be
altered on this screen. Your phone is set up by default for connecting to
the network.
To create a new connection:
1. Touch Create .
2. Select the parameter you want to edit:
•Set name : enter a profile name.
• Access name : edit the access point name.
• Auth type : select the type of authentication used for this WAP
connection: Normal, Secure, or None.
•User ID : enter the User ID required to connect to the network.
•Password : enter the user password required to connect to the
network.
•Protocol : set the connection protocol used by the WAP browser:
HTTP, WAP, or Other.
•Home URL : enter the URL address of the page to be used as your
home page.
• Gateway address : (WAP only) enter the gateway address of the
proxy server.
•Proxy address : (HTTP only) set the proxy server address and port.
• Secure connection : (WAP only) set to On or Off.
Menu
a817 Blink.book Page 135 Monday, October 4, 2010 10:03 AM