User's Manual

136
• Linger Time (Sec.) : set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
• Advanced settings : allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.
– Static IP : specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
– Static DNS : specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Traffic Class : select the traffic class.
Note: The WAP settings may vary depending on the service provider.
3. Touch Save to store these new settings.
IMS Settings
IMS is the method used to connect to the server in order to set up
the Video Share option.
1. Touch ➔ Settings ➔ Connectivity ➔ IMS settings .
2. Touch one of these options:
• IMS Service : allows you to set the IMS service to On or Off .
Important!: If you reset the IMS Service to Off , you will not be able to use the
Video Share Option.
•IMS Profiles : allows you to set the server that service is coming
from. Select a profile and make your alterations.
Important!: If you change from the default AT&T IMS , you may not be able to
use Video Sharing.
Menu
a817 Blink.book Page 136 Monday, October 4, 2010 10:03 AM