User's Manual

Tools 155
4.
Once stopped, choose from one of the following options:
•Play : () allows you to play the memo.
•Record : allows you to save the current memo and begin another
session.
• Send via : allows you to send your voice clip to other people using
either a message or to a Bluetooth device.
•More : provides these additional functions.
– Delete : allows you to delete the current memo.
– Set as : allows you to set the current recording as a Caller Ringtone for a
specific contact or an Alarm Tone.
– Properties : displays the Name, Format, Size, and so on, of the current
recording.
5. To exit, press or press .
Recorded Audio Folder
This folder shows a list of audio clips that have been recorded
and saved. To access this folder, use the following steps:
1. Touch ➔ My Stuff ➔ Audio ➔ Recorded Audio .
2. Touch a pre-recorded memo from the list to begin
playback.
3. To exit, press or press .
Record Audio Settings
To configure the filename and maximum length for a recording.
1. From Idle mode, touch ➔ Tools ➔ Record Audio ➔
Settings .
2. Touch the following field and edit the information:
• Recording time : allows you to choose the maximum limit allowed
for the recorded audio file (1 Minute, 2 Minutes, 3 Minutes,
4 Minutes, 5 Minutes, 60 Minutes, or Limit for MMS).
3. Touch Save .
Alarms
This feature allows you to name an alarm and set it to ring at a
specific time.
1. Touch ➔ Tools ➔ Alarms ➔ Create Alarm .
The following options display:
• Alarm Name : allows you to use a specific name for the alarm. The
name appears on the display when the alarm activates.
• Alarm Time : allows you to set the time at which the alarm sounds.
Use the Keypad mode to adjust the Hour , Minute , and AM / PM
values manually or the Wheel mode by using the + (up) or - (down)
buttons or by quickly sweeping your fingertip over the numbers.
Touch Set to save the new values.
Menu
Menu
Menu
a817 Blink.book Page 155 Monday, October 4, 2010 10:03 AM