User's Manual

Call Functions 41
1.
Touch Reset .
2. Touch the box next to any individual fields you would like to
reset.
– or –
Touch Select All to select every entry in the list.
3. Touch Reset .
4. Enter the user-defined password and touch Confirm to
reset the selected counters. For more information, refer to
“Change Phone Password” on page 66.
Press or to cancel this operation.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume key
on the left side of the phone.
䊳 Press Up (top area of the volume key) to increase the volume
level and press Down (bottom area of the volume key) to
decrease the volume level.
In Idle mode, press the Volume key Up or Down to adjust the
ringer volume.
In-Call Options
During an active call there are several functions available by
touching a corresponding on-screen button.
• Speaker On/Off : routes the phone’s audio through either the speaker
or through the earpiece.
– Slide Speaker to On to route the audio through the speaker. (You can
adjust the speaker volume using the volume key.)
– Slide Speaker to Off to use the phone’s earpiece (see “Using the
Speakerphone During an Active Call” on page 42.)
• Mute/Unmute : turns the onboard microphone either on or off.
– Touch Mute during a call to mute the microphone.
– Touch Unmute to unmute the microphone.
• Video Share : lets you share video during an active call. For more
information, refer to “Video Share” on page 35.
• Dial : to display the on-screen keypad where you can choose to initiate
a New call or display your Contacts.
• Hold/Resume : to place the current active call on hold or to resume the
call after it has been placed on hold.
• More : to access additional in-call options such as:
– Address Book : to display your current Address Book entries.
– Save to Address Book : to save the current phone number into your
Address Book if it is not already saved.