User's Manual

64
numbers stored in the FDN list on the SIM card. For more
information, refer to “FDN Mode” on page 86.
1. Touch On or Off from the Fixed dialing mode field.
•On : you can only call phone numbers stored in the Fixed Dial
Contacts. You must enter your PIN2 to continue this configuration.
You can obtain your PIN2 from AT&T’s customer service
department.
•Off : you can call any number.
2. Use the on-screen keypad to enter your PIN2 Code and
touch Confirm .
Note: The PIN2 code is provided by AT&T. Entering an incorrect PIN2 code
can cause the phone to lock, at which point, you will have to call AT&T
customer service for assistance.
Change Phone Password
The Change Password feature allows you to change your current
phone password to a new one. You must enter the current
password before you can specify a new one.
1. Touch the Change phone password field.
2. Enter the current phone password and touch Confirm .
Note: Initially, the phone will not have a password assigned, and step 2 will
not be necessary. Once a password is assigned, all steps are
necessary.
3. Enter the new password and touch Confirm .
4. Re-enter the same password and touch Confirm .
Note: If you change your password, be sure to write it down and keep it in a
safe place. If you forget your password, your phone will require AT&T
customer service to have it unlocked.
Change PIN Code
This feature allows you to change your current PIN, provided that
the Check PIN Code feature is enabled. The Check Pin Code field
must be active before you can access this function (page 63).