Operation Manual

48
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press the key to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the key.
Options During a Call
49
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s micro-
phone off, so that the other party cannot hear you.
Example
: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed
as follows.
1. Press the Options soft key.
2. If necessary, press the key to highlight the
Mute option.
3. Press the OK soft key.
The other party can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. If necessary, press the key to highlight the
Unmute option.
3. Press the OK soft key.
The other party can hear you again.