Operation Manual

Network Services
104
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing the or key until the appropriate
option is highlighted, and then press Select.
2. Select the type of calls to be diverted by
pressing the or key until the appropriate
option is highlighted and then press Select.
The current status is displayed. If the option has
already been set, the number to which the calls
are diverted is displayed.
4. Enter the number to which the calls are to be
diverted and press OK.
To enter the international code, press the
key until the + sign is displayed.
5. If you have entered the No Reply option, set the
length of time for which your phone rings before
the call is diverted and press the Select soft key.
The phone sends your settings to the network
and the network’s acknowledgement is
displayed.
You can deactivate all
call diverting settings by
selecting the Cancel All option.
3.
To... Then press the...
Activate call
diverting
Activate soft key.
Go to Step 4.
Change the
call number
Change soft key.
Go to Step 4.
Deactivate call
diverting
Remove soft key.
Network Services
105
Call Barring (Menu 6.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual barring options for each
of the following call types:
• Voice calls only
• Fax calls only
• Data calls only
To set your call barring options, proceed as follows.
1. Select the type of call barring required by
pressing the or key until the appropriate
option is highlighted and then press the Select
soft key.
2. Select the type of calls to be barred by pressing
the or key until the appropriate option is
highlighted and then press Select.