User manual

Organiser
147
3. Enter the second figure.
4. Repeat steps 2 and 3, if necessary.
5. Press the
Equal soft key to view the result.
The result appears in the Answer box.
Note : The result is rounded off to six decimal
places.
6. When you have finished, press the soft key or
the key to exit.
Conversion (Menu 7.7)
This menu option allows you to convert one type of
measurement to another.
To convert a value:
1. Scroll to the type of conversion to be performed:
Length , Weight , Volume , Area, and
Temperature . Press the Select soft key.
2. Enter the value to be converted and press the
Down key to enter it into the
From field.
You can enter a decimal point (.) using the
key. And you can enter a minus (-) using the
key in
Temperature .
3. Select the original unit of measurement by
pressing the Left or Right key. Then press the
Down key to move to the
To field.
Refer to the table on the following page for the
units available.
D488Eng4China.book Page 147 Thursday, March 31, 2005 4:49 PM