User manual

Funbox
119
Bearer : select a bearer to be used for each type of
network address accessed;
GPRS or Data .
The remaining options depend on the Bearer
setting.
When the bearer is set to
GPRS :
IP address : enter the WAP gateway address
required to connect to the Internet.
User name : enter the User ID required to connect
to the GPRS network.
Password : enter the password required to connect
to the GPRS network.
APN : enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to
Data :
IP address : enter the WAP gateway address
required to connect to the Internet.
Login name : enter the PPP server login ID.
Password : enter the PPP server password.
Dial-up number : enter the PPP server phone
number.
Data call type : select a data call type; Analogue
or
ISDN .
Note : The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear cache (Menu 6.1.5)
You can clear the information stored in the cache,
the phone’s temporary memory in which stores the
most recently accessed Web pages are stored.