Smartphone Users Manual

Understanding Your Phone 23
2.
Select Settings () ➔ System tab ➔ Hard Reset ().
The Hard Reset screen displays.
3. Select the Hard Reset button. A confirmation screen
displays.
4. Select Device , enter
the displayed
password, then
select the Yes button
to remove all
settings and data
stored in your
device.
5. Cycle power to the
phone, that is, turn
the power off and then on again.
6. Once the phone starts, you must use the Stylus and select
the LCD screen to begin the calibration process.
Note: You should not use your fingertips during the calibration process as
this can improperly calibrate your device. Please use the Stylus for
calibration of the SGH-i907.
7. Using your Stylus, select within the crosshairs that appear
in the align screen.
8. Follow the on screen tutorials and complete the setup
process.
Performing a Manual Hard Reset
Important!: Caution, when performing a manual Hard Reset, the storage and
settings initialize.
Remove your SIM card prior to performing a Manual Hard Reset
to prevent loss of SIM-specific information.
1. Power off the device.
2. Press and hold the H key.
3. Press the Power On key until the device starts to boot up
(red light will flash).
4. Immediately release the power key while continuing to
press the H key.
5. Wait for the Format Mode screen to appear.
6. Release the H key and follow the on-screen instructions.