Smartphone Users Manual

80
• Strong alphanumeric : This password must be at least seven
characters in length and contain at least three of the following:
uppercase/lowercase letters, numerals, and punctuation.
When a password is configured, there is a “Prompt if device
unused for” option that allows a length of time range from 0
minutes - 24 hours. When this option is set, you can continue to
use the SGH-i907 until the screen turns off due to inactivity. If the
device is inactive for a greater amount of time than specified in
this setting, a password must be entered when you turn the
device back on.
To set the password:
1. From the Today screen, press the Start key ( ) to
activate the Start menu.
2. Select Settings () Personal tab Lock ( ).
3. Select the check box next to Prompt if device unused for .
4. Select the Minutes drop down menu and select the amount
of unused time required before you are prompted for a
password if the phone becomes idle.
5. Select the Password type box and select either Simple PIN
or Strong alphanumeric .
6. Select the Password box and use either your QWERTY
keypad or keypad to enter the password you want.
Re-enter the password in the Confirm box.
7. Select , then select Yes to confirm.