Tri Band GPRS Telephone Owner Manual
Messages
64
Send: allows you to send a message that you have
received or saved. For more information on how to
send a message, see page 64.
Cut Address: allows you to extract URL or
e-mail addresses or a phone numbers from the
message text, so that you can save them in your
phone’s memory.
Move: allows you to move the message to another
memory location, from the SIM card memory to the
phone memory or vice versa.
Select Objects: allows you to save the media
items, such as sounds or images, from the message
into your phone. You can use the objects when
writing a message; for details, see page 66.
Write New
(Menu 1.3)
In this menu, you can write and send a text
message.
Note
: You can enter up to 918 alphanumeric
characters for your message. If you add objects
to the message, the number of characters you
can enter will be decreased.
Creating a Simple Text Message
1. Create your message.
Note
: For more information about entering
characters, refer to page 44.
2. When you finish entering the message, press the
Options soft key. The following options are
available:
• Send: allows you to send the message. The
message is deleted after sending.
Messages
65
• Save and Send: allows you to save a copy of
the message and then send the message to
the required destination. You can read the
message in your Outbox.
• Save: allows you to save the message so that
it can be sent later. You can read the message
in your Outbox.
• For more information about Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see “Creating a Message using the
Options” on page 65.
3. Select Send or Save and Send, and press the
Select soft key.
If you only want to save the message, select
Save. After saving the message, the phone
returns to the Messages menu.
4. Enter a destination number and press the OK
soft key. The message is sent.
Creating a Message using the Options
1. Create a message.
2. Press the Options soft key.
3. Select one of the following options as required
by using the and keys and pressing the
Select soft key.
• Text Formatting: allows you to format the
style of the text. For the Size attribute, the
Normal, Large and Small sizes are available.
For the Underline and Strikethrough
attributes, select On or Off. The attributes can
be combined.