Tri Band GPRS Telephone Owner Manual

Messages
70
Voice Mail (Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if your network supports this
service.
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 1.8.2). You can then select this option and
simply press the OK soft key to listen to your
messages.
To quickly connect to the voice server, press and
hold the key in the idle mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
Note
: Voice Mail is a network feature. Please contact
your service provider for more information.
To Press the
enter the server
number
corresponding numeric
keys.
correct a digit key.
move the cursor
to the left/right
without clearing
the digit
or key.
Messages
71
Broadcast (Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages display immediately they are
received, provided that:
• the phone is in the idle mode
• the Receive option is set to Enable
• the message channel is currently active in the
channel list
The following options are available:
Read: lets you view the received message.
Volatile displays the messages from the network,
but loses its contents as soon as the phone is
switched off. Scroll through the message by using
the and keys. While reading a message,
press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available.
Select
: use to enable or disable channels in the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
Add Channel
: use to enter the ID and title for a new
channel.
Delete
: use to remove a channel from the list.
Edit
: use to change the ID and title of an existing
channel.