Tri Band GPRS Telephone Owner Manual

76
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type
• sounds made when you press a key, make an
error or receive a message
Note
: When the phone is in the silent mode (see
page 30), you cannot change the sound
settings.
Ring Tone (Menu 3.1)
This option allows you to select the required ring
melody.
You can choose between many different melodies.
Each time you select a melody, it displays for a few
seconds. If you have downloaded any sounds from
the Internet or EasyGPRS programme or received
any ring tone messages, you can view the list in
this menu.
Ring Volume (Menu 3.2)
This option allows you to adjust the ring volume to
one of five levels.
Use the and keys or the and keys on
the left side of the phone.
Sound Settings
77
Alert Type (Menu 3.3)
This option allows you to specify how you are to be
informed of any incoming calls.
The following options are available:
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu option
(Menu 3.1); see page 76.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone (Menu 3.4)
This option allows you to select the tone that the
keypad generates when you press a key.
You can select an option from OFF, Cool, Piano,
Tone and Beep.
To turn off the sound, select OFF.