User's Manual

Highlight the Add New Network ➔ Create Manually option and press the Select soft key.

3. Type your desired profile name for the network.

4. Press the

Down

key to highlight the

SSID

option.

Enter the new network's

SSID:

option.

The SSID (Service Set Identifier), is the actual name of the wireless network, not the profile name you entered.

The profile name is simply a name to help you keep track of which network is which. The SSID is a key piece

of information needed to locate and connect to a wireless network.

5. Press the Down key to highlight the

Security type

option. Press the Left or Right key to set to

Key none

WEP

64 bit

WEP 128 bit

WPA-PSK

, or

WPA2-PSK

. The Key field only becomes active if you choose an option other

than

None

Note:

The Security Type refers to the particular security protocol being used for a specific wireless network. WPA is the current security

standard for wireless networks and is recommended by T-Mobile. WEP is an older, and less robust security standard, but it

provides wider compatibility.

6. Press the

Down

key to highlight the

Key:

option. For information on the key required, see “Use Get Security

Key” on page 35.