User Manual

Camera and Camcorder Settings
This section describes the different settings that you can
configure on your camera. Not all of the following options are
available in both still camera and video camera modes. The
available options vary by mode.
1. From the viewfinder, tap
Quick Settings

Camera Settings .
2. The follow settings are located under the Camera,
Camcorder, and General tabs. The settings that are
displayed depend on what camera mode you are in.
Camera :
•Photo size : Select a resolution for photos. Use higher
resolution for higher quality. Higher resolution photos take up
more memory. Default is 2560x1440 (16:9).
•Focus mode : allows you to assign the focus settings. Choose
from Auto focus or Macro.
• Metering modes : allows you to set how the camera measures
or meters the light source: Center-weighted, Matrix, or Spot.
•ISO : determines how sensitive the light meter is on your digital
camera. Choose from Auto, 100, 200, or 400. Use a lower ISO
number to make your camera less sensitive to light, a higher
ISO number to take photos with less light, or Auto to let the
camera automatically adjust the ISO for each of your shots.
Camcorder :
•Video size : Select a resolution for videos. Use higher resolution
for higher quality. Higher resolution videos take up more
memory.
Settings :
•Location tag : attach a GPS location tag to the photo. To
improve GPS signals, avoid shooting in locations where the
signal may be obstructed, such as between buildings or in low-
lying areas, or in poor weather conditions. Your location may
appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.
• Review pics/videos : set this option if you want to view each
picture after you take it or video after your record it. Select a
time value.
Multimedia 120