User's Manual

Connections 123
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Disconnecting a Paired Bluetooth Device
Disconnecting a paired device breaks the connection
between the device and your phone, but retains the
knowledge of the pairing. At a later point when you
wish to reconnect the device, there is no need to
setup the connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, touch the
previously paired device (from the bottom of
the page).
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and
hold the name of the previously paired device,
and select Disconnect .
Note: Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your phone or it is powered off.
Deleting a Paired Bluetooth Device
Deleting a device from your list removes its
“connection record” and upon reconnection would
require that you re-enter all the previous pairing
information.
1. Verify Bluetooth is active.
2. From the Bluetooth settings page, touch and
hold the name of the previously paired device
(from the bottom of the page). This opens the
connected device’s menu options.
3. Tap Unpair to delete the paired device.
Sending Contacts via Bluetooth
Depending on your paired devices’ settings and
capabilities, you may be able to send pictures,
Contact information, or other items using a Bluetooth
connection.
Note: Prior to using this feature, Bluetooth must first be
enabled on both your phone and the external device, and
the recipient’s device must be visible.
Only a Contact’s information can be sent via Bluetooth.
No other file type (video, image, or audio) can be sent
using Bluetooth.
1. Verify your Bluetooth is active and your phone
is visible.
2. From the Home screen, tap ( Contacts ).
3. Touch and hold the entry from the list to
display the on-screen context menu.