User's Manual

124
4.
Tap Send namecard via ➔ Bluetooth and select
a paired external Bluetooth device.
Note: The external Bluetooth device must be visible and
communicating for the pairing to be successful.
5. A Bluetooth share notification displays in your
notifications list.
Enable Downloading for Web
Applications
Important!: Before you can download a web application you
must insert an SD into the phone and enable the
Unknown sources feature (enables downloading).
For more information, refer to “Installing the
microSD Memory Card” on page 7. Also, see
“Mounting the SD Card” on page 38.
1. Press ➔ and then tap
( Settings ) ➔ Applications .
2. Tap the Unknown sources check box.
3. Tap OK to allow install of non-Market
applications. Tap again to remove the
checkmark and disable the installation of non-
market applications.
Warning!: Not all Web applications are safe to download. In
order to protect your phone and data, use Android
Market to install web applications. For more
information, refer to “Downloading a New Google
Application” on page 106.
PC Connections
You can connect your device to a PC using an optional
PC data cable using various USB connection modes.
Mass storage is the default connection method.
• Mass storage : allows you to use the onboard storage
capacity of the phone to store and upload files. This option
allows your computer to detect the phone as a removable
storage drive.
Connecting as a Mass Storage Device
You can connect your device to a PC as a removable
disk and access the file directory. If you insert a
memory card in the device, you can also access the
files directory from the memory card by using the
device as a memory card reader.
Note: The file directory of the memory card displays as a
removable disk, separate from the internal memory.
1. Insert a memory card into the device to transfer
files from or to the memory card.
Note: To use any downloaded market application that requires a
USB connection between your phone and your PC, you
should first set the USB setting to Mass storage .
2. Press to return to Idle mode.
3. Connect the multifunction jack on your device
to a PC using an optional PC data cable.
A pop-up window displays on the PC when
connected.
4. Open the folder to view files.