User's Manual

Changing Your Settings 141
2.
Tap Use wireless networks to enable location
information using the wireless network.
Enabling the GPS Satellites
1. Press ➔ and then tap
( Settings ) ➔ Location and security .
2. Tap Use GPS satellites enable the GPS satellite.
Screen Unlock Pattern Settings
To secure data and limit phone access, set the phone
to require a screen unlock pattern each time you turn
on the device, or every time the phone wakes up
from sleep mode (when the screen automatically
turns off).
Setting an Unlock Pattern
Creating a screen unlock pattern increases security
on the phone. When you enable the User visible
pattern field, you will draw an unlock pattern on the
screen whenever you want to unlock the phone’s
buttons or touch screen. When you activate the User
tactile feedback field, you feel vibration as feedback
while drawing the pattern.
Note: Make sure the Require Pattern field is activated.
1. Press ➔ and then tap
( Settings ) ➔ Location and security .
2. Tap Set screen lock ➔ Pattern .
3. Read the instructions then tap Next .
4. Review the onscreen animation procedure for
drawing a pattern and tap Next when you are
ready to draw a pattern.
5. Draw your pattern by touching your first
on-screen point. Then, without removing your
finger from the screen, drag your finger over
adjacent points until the gray trace line overlaps
each point and they are highlighted with a
green circle.
6. When you have connected at least four dots in
a vertical, horizontal or diagonal direction, lift
your finger from the screen and tap Continue .
7. Confirm the new pattern by redrawing it and
then tapping Confirm . The Unlock pattern is
set.
Changing the Screen Lock Pattern
This feature allows you to change the previously
stored unlock pattern and update it if necessary. This
process is similar to changing your password from
time to time.
1. Press ➔ and then tap
( Settings ) ➔ Location and security .
2. Tap Set screen lock ➔ Change screen lock .
3. Retrace your current pattern on the screen.
4. Tap Pattern and repeat steps 3 - 7 from the
previous section.