User Manual (ver.F4)

Section 10: Camera and Camcorder 143
Take and Send
Section 10
• View finder: allows you to set the view finder to Full screen,
Full screen & indicator, Full screen & Guideline, or Standard
ratio.
• Scene programs: allows you to choose Normal or Night
scene.
• Metering exposure: allows you to choose between Matrix,
Center-weighted, and spot.
• White balance: allows you to choose between Auto,
Daylight, Incandescent, Fluorescent, Cloudy, and Sunset.
• ISO: allows you to set ISO to Auto, 100, 200, or 400. The ISO
value is a number indicating the digital camera sensors
sensitivity to light. In bright light, set the ISO value lower.
• Setup
• Shutter sound: allows you to select a tone for the shutter
sound. Choose between 5 tones.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On
or Off.
• Default name: allows you to change the default name
assigned to your photo.
Camera short cuts: shows you how to change options
using your keypad in capture mode. The following short
cuts are available:
Up and Down keys zoom in and out.
Left and Right keys adjust the image brightness.
Up volume key flips the image vertically.
Down volume key creates a mirror image.