User manual

Sound Settings
106
Alert type: lets you specify how you are informed
of any incoming calls.
Melody with light: the phone rings using the melody
selected in the incoming call’s sound setting (Menu
4.1.1) with flash of the service light.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then starts ringing.
Light only:only the service light is switched on. The
phone neither rings nor vibrates.
Melody only: the phone rings using the melody
selected via the Melody option.
Messages (Menu 4.2)
This option allows you to set up the ringer for each
incoming short messages and multimedia
messages.
Short message (Menu 4.2.1) / Multimedia
message
(Menu 4.2.2)
The following options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
Alert type: lets you specify how you are informed
of any incoming messages.
Tone: the phone rings using the tone selected via
the Tone option. See above.
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then starts ringing.
Sound Settings
107
Light only: only the service light is switched on. The
phone neither rings nor vibrates.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Power On/Off (Menu 4.3)
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either T-Mobile or Basic. To turn
the sound off, select Off.
Connection Tone (Menu 4.4)
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
The following options are available:
Off: the phone does not beep.
On: the phone beeps when your call is accepted.
Key Tone (Menu 4.5)
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
The following options are available:
Off: the keys do not make any sound.