SGH-x427 Portable Digital Telephone User Manual Please read this manual before operating your phone, and keep it for future reference. Printed in Korea GH68-04323A English. 09/2003. Rev. 1.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating thereto (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Samsung Telecommunications America (STA), Inc. Headquarters: 1130 E. Arapaho Road Richardson, TX 75081 Tel: 972-761-7000 Fax: 972-761-7001 Customer Care Center: 1601 E. Plano Parkway Suite 150 Plano, TX 75047 Tel: 888-987-HELP (4357) Fax: 972-761-7501 Internet Address: http:// www.samsungusa.com/wireless ©2003 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval.
iv
Contents Unpacking .............................................................. 7 Your Phone ............................................................ 8 Phone Layout ................................................................. 8 Display......................................................................... 11 Service Light................................................................. 14 Getting Started .................................................... 15 Installing the SIM Card...........
Contents Options During a Call ........................................... 46 Putting a Call on Hold..................................................... Switching the Microphone Off (Mute)................................ Muting/Sending Key Tones.............................................. Sending Tones .............................................................. Searching for a Number in Phonebook .............................. Using the Message Service (SMS) ....................................
Contents Sound Settings..................................................... 75 Ring Tone (Menu 3.1) ....................................................... Ring Volume (Menu 3.2) ................................................... More Ringtones (Menu 3.3) ............................................... Alert Type (Menu 3.4)....................................................... Keypad Tone (Menu 3.5)................................................... Message Tone (Menu 3.6) ..............................
Contents Funbox ............................................................... 108 Games (Menu 7.1) ......................................................... More Games (Menu 7.2) ................................................. WAP Browser (Menu 7.3) ................................................ Downloads (Menu 7.4).................................................... 108 109 109 116 Solving Problems ............................................... 119 Access Codes ...................................
Contents Glossary ............................................................. 161 Index ................................................................. 165 Quick Reference Card.........................................
Contents 6
Unpacking Your package contains the following items: Handset Battery Travel Adapter User Guide Your local Samsung dealer can provide you with additional accessories including: • • • • • • Simple hands-free kit Standard battery Cigarette lighter adapter Holster Ear microphone Leather Case 7
Your Phone Phone Layout The following illustrations show the main elements of your phone: Earpiece Folder Volume/menu browse keys Soft key (left) Dial/menu confirmation key Cancel/ correction key Special function keys 8 Display Navigation (Up/ Down/Left/Right) keys Soft key (right) WAP Browser key Power on/off / menu exit key Alphanumeric keys Microphone
Your Phone Antenna Service light Key(s) Description In Menu mode, scroll through the menus and Phonebook. In Idle mode, allows you to access your favorite menus directly. For more information about shortcuts, see page 88. In Menu mode, the Left key returns to the previous menu level and the Right key selects the current menu. When entering text, move the cursor left and right respectively. In Idle mode, allows you to access your favorite menus directly. For more information about shortcuts, see page 88.
Your Phone Key(s) Description (continued) In Idle mode, launches the WAP (Wireless Application Protocol) browser. Makes or answers a call. When held down in Idle mode, recalls the last number dialed or received. In Menu mode, selects a menu function or stores information that you have entered, such as a name in the phone or SIM memory. Deletes characters from the display. In Menu mode, returns to the previous menu level. Ends a call. Also switches the phone on and off when held down.
Your Phone Key(s) Description (continued) Enter special characters. Perform various functions. (on the side of the phone) During a call, adjust the earpiece volume. In Idle mode, adjust the keypad tone volume. In Menu mode, scroll through the menus and Phonebook.
Your Phone Area Description First line Displays various icons. See page 12. Middle lines Displays messages, instructions, and any information that you enter, such as the number you are dialing. Last line Shows the functions currently assigned to the two soft keys. Icons Icon Description Shows the received signal strength. The greater the number of bars, the better the signal. If this icon is gray, you are outside your network area and are restricted to emergency calls only.
Your Phone Icon Description Appears when you set an alarm to ring at a specified time. Appears when you are entering text to indicate the current text input mode. Appears when a new text message is received. Appears when a new voice mail message is received. Appears when Mute mode is active. Appears when Silent mode is active or you set the Alert Type menu (Menu 3.4), so that the phone vibrates when you receive a call. For further details, see page 28 and page 76 respectively.
Your Phone Backlight A backlight illuminates the display and the keypad. When you press any key or open the folder, the backlight turns on. It turns off when no keys are pressed within a given period of time, depending on your setting in the Back Light menu (Menu 4.6.2). After one minute, the display turns off to conserve your battery power. To specify the length of time the backlight is active, set the Back Light menu (Menu 4.6.2). See page 85 for further details.
Getting Started Installing the SIM Card When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription details, such as your PIN, any optional services available and many others. Important! The plug-in SIM card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SIM cards out of the reach of small children. 1.
Getting Started 3. Slide the SIM card into the SIM card socket so that it locks the card into place. Make sure the gold contacts of the card face into the phone. Note: When you need to remove the SIM card, slide it, as shown, and take it out of the socket.
Getting Started 4. Place the battery so that the tabs on the end align with the slots at the bottom of the phone. 5. Press the battery until it clicks into place. Make sure that the battery is properly installed before switching the phone on. Charging a Battery Your phone is powered by a rechargeable Li-ion battery. A travel adapter comes with your phone for charging the battery. Use only approved batteries and chargers. Ask your local Samsung dealer for further details.
Getting Started Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel adapter into the jack at the bottom of the phone. 2. Plug the adapter into a standard AC wall outlet. 3.
Getting Started Low Battery Indicator When the battery is weak and only a few minutes of talk time remain, you hear a warning tone and a message repeats at regular intervals on the display. When this happens, your phone turns off the backlight to conserve the remaining battery power. When the battery level gets too low, the phone automatically turns off. Switching the Phone On/Off 1. Open the folder. 2. Press and hold the on. key until the phone switches 3.
Getting Started 4. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, see page 123. The phone searches for your network and after finding it, the idle screen, illustrated below, appears on the display. Now, you can make or receive a call. Service Provider 05:17 AM Sat Oct 02 Menu Name Note: The display language is preset to English at the factory. To change the language, use the Language menu (Menu 4.4). For further details, see page 82. 5.
Call Functions Making a Call When the idle screen displays, enter the area code and phone number, and press the key. Note: When you activate the Auto Redial option in the Extra Settings menu (Menu 4.7), the phone automatically redials up to ten times when the person does not answer the call or is already on the phone. See page 87 for further details. Making an International Call 1. Press and hold the key. The + character appears. 2. Enter the country code, area code, and phone number and press the key.
Call Functions Correcting the Number To clear the last digit displayed Press the key any other digit in the number Left or Right key until the cursor is immediately to the right of the digit to be cleared. Press the key. You can also insert a missing digit simply by pressing the appropriate key. the whole display key and hold it for more than one second. Ending a Call When you want to finish your call, briefly press the key.
Call Functions 3. Use the Up and Down keys to scroll through the numbers until the number you want highlights. 4. To dial the number Press the key. edit the number Options soft key and select Edit. Then change the number, referring to “Correcting the Number” on page 22. delete the number Options soft key and select Delete. delete all of the numbers Options soft key and select Delete All.
Call Functions Adjusting the Volume During a call, if you want to adjust the earpiece volume, use the Volume keys on the left side of the phone. Press the key to increase the volume level and the key to decrease the level. In Idle mode, you can also adjust the keypad tone volume using these keys. Answering a Call When somebody calls you, the phone rings and displays the incoming call animation. When the caller can be identified, the caller’s phone number, or name if stored in your Phonebook, displays.
Call Functions 1. If necessary, open the folder. Press the key or the Accept soft key to answer the incoming call. If the Anykey Answer option in the Extra Settings menu (Menu 4.7) is activated, you can press any key to answer a call except for the key and the Reject soft key. See page 87. If the Open to Answer option in the Extra Settings menu (Menu 4.7) is activated, you can answer the call simply by opening the folder.
Call Functions To view the missed call immediately: 1. If the phone is closed, open the folder. 2. Press the View soft key. The number corresponding to the most recent missed call displays, if available. 3. To scroll through the missed calls Press the Up or Down key. call the number displayed edit or delete a missed call number key. Select soft key. See below. Editing a Missed Call Number Note: When the number corresponding to the missed call is not available, the Edit Number option does not display.
Call Functions 4. Change the number. 5. To Press the key. call the number store the number Save soft key and enter the name and location. For further details, see page 31. Deleting a Missed Call 1. Press the Options soft key. 2. If necessary, press the Up or Down key to highlight the Delete option. 3. Press the Select soft key. You can press the Call feature. key at any time to exit the Missed Note: You can access the Missed Call feature at any time by selecting the Missed Calls menu (Menu 2.1).
Call Functions Quickly Switching to Silent Mode Silent mode is convenient when you wish to stop the phone from making noise, in a theater for example. In Idle mode, press and hold the key until the “Silent Mode” message and the Vibration icon ( ) display. When you exit Silent mode, your phone changes the sound settings as follows: Option New Setting Alert Type (Menu 3.4) Melody Keypad Tone (Menu 3.5) Tone Message Tone (Menu 3.6) Light Only Folder Tone (Menu 3.
Selecting Functions and Options Your phone offers a set of functions that allow you to customize your phone. These functions are arranged in menus and sub-menus, accessed using the two soft keys marked and . Each menu and sub-menu allows you to view and alter the settings of a particular function. The roles of the soft keys vary according to the function you are currently using; the label on the bottom line of the display just above each key indicates its current role.
Selecting Functions and Options To view the various functions and options available and to select the one you want: 1. Press the appropriate soft key. 2.. To Press the select the: • function displayed • option highlighted Select soft key or the Right key. view the next function or highlight the next option on a list Down key or key on the left side of the phone. move back to the previous function or option on a list Up key or key on the left side of the phone.
Phonebook You can store phone numbers and their corresponding names in your SIM card and phone’s memories. They are physically separate but are used as a single entity, called Phonebook. Storing a Number with a Name There are two ways to store a number: • Using the Save soft key in Idle mode • Using the New Entry option in the Phonebook menu Storing a Number in Idle Mode When you enter a number, Save appears above the left soft key to allow you to store the number in Phonebook. 1.
Phonebook 4. Enter a name and press the OK soft key. The maximum length you can enter for a name depends on your SIM card. 5. Press the right soft key, labeled To Card or To Phone to switch between the phone’s and card’s memories. Note: When you change phones, any numbers stored in your SIM card memory are automatically available with the new phone, whereas any numbers stored in the phone’s memory must be reentered. 6.
Phonebook 3. Select an icon to identify the category of the number to be stored by pressing the Left or Right key, and press the Select soft key. Note: The E-mail icon ( ) is available in this step. It allows you to save an E-mail address instead of a phone number. 4. Enter a name and press the OK soft key. The maximum length of a name depends on your SIM card. 5. Enter a number or address you want to store and press the Save soft key. 6. Continue the procedure from step 5 on page 32 to store the number.
Phonebook The following options are available: Paste: allows you to paste the number into the normal dialing mode. Use this option to dial a number similar to one in Phonebook, such as a different extension in the same office. Use the key to change the number as required; see page 22 for further details. When you are ready to dial, press the key. Edit: allows you to edit the name and/or number. Erase: allows you to erase the name and number from Phonebook.
Phonebook Searching for a Number in Phonebook After storing numbers in Phonebook, you can search for them in two ways; by name and by caller group. Searching for a Number by Name 1. At the idle screen, press the Name soft key. 2. Press the Select soft key when Search highlights. You are asked to enter a name. 3. Enter the first few letters of the name. The Phonebook entries are listed, starting with the first entry matching your input. 4. To Press the view the highlighted entry View soft key.
Phonebook Searching for a Number by Caller Group 1. When the idle screen displays, press the Name soft key. 2. Scroll to Group Search by pressing the Up or Down key and press the Select soft key. You are asked to enter a group name. 3. Enter the first few letters of the group name that you wish to find. The caller groups are listed, starting with the first group matching your input. 4. Scroll to the group you want by pressing the Up or Down key and press the View soft key.
Phonebook Editing a Caller Group 1. When the idle screen displays, press the Name soft key. 2. Scroll to Group Edit by pressing the Up or Down key and press the Select soft key. 3. Scroll through the group list by pressing the Up or Down key. 4. When the group you want highlights, press the Options soft key. 5. Select each option and change the settings, as required.
Phonebook Speed-dialing Once you have stored phone numbers in the SIM card, you can set up to eight speed-dial entries and then dial them easily whenever you want, simply by pressing the associated number key. Setting Up Speed-dial Entries 1. At the idle screen, press the Name soft key. 2. Scroll to Speed Dial by pressing the Up or Down key and press the Select soft key. 3. Select the key to which you wish to assign the speeddialing number, from the to keys, and press the OK soft key.
Phonebook • Change: allows you to assign a different number to the key. • Erase: allows you to clear the setting so that no number is assigned to the key. • Erase All: allows you to clear the settings for all keys so that no numbers are assigned to any of the keys. • Number: allows you to view the number assigned to the key. 7. When you are finished, press the or key. Speed-dialing from Phonebook To speed-dial the numbers assigned to keys press and hold the appropriate key.
Entering Text When using your phone, you will often need to enter text, such as when storing a name in Phonebook, creating your personal greeting or scheduling events on your calendar. You can enter alphanumeric characters by using your phone’s keypad. Your phone has the following text input modes: • T9 mode This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter; for example, when you press the key once, J, K or L displays.
Entering Text Changing the Text Input Mode When you are in a field that allows characters to be entered, you will notice the text input mode indicator on the display. Example: Writing a text message Text input mode indicator Options To select 918 Press the until soft key T9 mode displays. See page 42. Symbol mode displays. See page 45. Upper-case character mode displays. See page 43. Lower-case character mode displays. See page 43. Number mode displays. See page 45.
Entering Text Using T9 Mode T9 is a predictive text input mode that allows you to key in any character using single keystrokes. This text input mode is based on a built-in dictionary. To enter a word in T9 mode: 1. When you are in T9 mode, start entering a word by pressing the to keys. Press each key only once for each letter. Example: To enter “Hello” in T9 mode, press the , , and keys. , The word you are typing appears on the display. It may change with each key that you press. 2.
Entering Text • To type words not found in T9 mode, change the text input mode to the upper/lower-case character input mode. • To enter full stops, hyphens or apostrophes, press the key. T9 mode applies grammar rules to ensure that the correct punctuation is used. Example: The key is used twice to display two punctuation marks: L e t ’ s e a t . • To shift the case in T9 mode, use the key. There are two cases: Lower Case ( ) and Capital Lock ( ).
Entering Text Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same key, just wait for a few seconds for the cursor to move to the right automatically, and then select the next letter. See the table below for more information about the characters available: Key Characters in the Order Displayed Upper Case Lower Case Space • To insert a space, press the key. • You can move the cursor by using the Left and Right keys.
Entering Text Using Number Mode Number mode enables you to enter numbers into a text message. Press the keys corresponding to the digits you want to enter. Using Symbol Mode Symbol mode enables you to insert symbols into a text message.
Options During a Call Your phone provides a number of control functions that you can use during a call. Putting a Call on Hold You can place the current call on hold whenever you want. You can make another call while you have a call in progress if your network supports this service. To place a call on hold, simply press the Hold soft key. You can reactivate the call whenever you want, by pressing the Unhold soft key. To make a call while you have a call in progress: 1.
Options During a Call When you want to finish, end each call normally by pressing the key. Switching the Microphone Off (Mute) You can temporarily switch your phone’s microphone off, so that the other party cannot hear you. Example: You wish to say something to another person in the room but do not want the person on the phone to hear you. To switch the microphone off temporarily: 1. Press the Options soft key. 2. If necessary, press the Down key to highlight the Mute option. 3. Press the OK soft key.
Options During a Call Muting/Sending Key Tones These options allow you to turn the key tones off or on. If the Mute keys option is selected, your phone does not transmit the key tones. It allows you to press keys without hearing annoying key tones during a call. Note: To communicate with answering machines or computerized telephone systems, the Send keys option must be selected.
Options During a Call Searching for a Number in Phonebook You can search for a number in Phonebook during a call. 1. Press the Options soft key. 2. Press the Down key to highlight the Phonebook option. 3. Press the OK soft key. The Phonebook entries are listed. 4. Enter the name that you wish to find. If you enter the first few letters of the name, the Phonebook entries are listed, starting with the first entry matching your input. 5. To view the highlighted entry, press the View soft key.
Options During a Call Call Waiting You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have set the Call Waiting menu (Menu 6.3) to Activate; see page 102. You are notified of an incoming call by a call waiting tone. To answer a call while you have a call in progress: 1. Press the key to answer the incoming call. The first call is automatically put on hold. 2. To switch between the two calls, press the Swap soft key. 3.
Options During a Call Setting up the Multi-party Call 1. Call the first participant in the normal way. 2. Call the second participant in the normal way. The first call is automatically put on hold. 3. To join the first participant to the multi-party call, press the Options soft key and select Join. Press the OK soft key. 4. To add a new person to the multi-party call, call the person in the normal way and then press the Options soft key. Select the Conference option and press the OK soft key.
Options During a Call 3. When the Private option highlights, press the OK soft key. Now you can talk privately to that person. The other participants can continue to converse with each other. 4. To return to the multi-party call, press the Options soft key and select Conference. Press the OK soft key. All of the multi-party call participants can now hear each other. Dropping One Participant 1. Press the Options soft key and choose the Select one option. Press the OK soft key.
Using the Menus You can tailor the phone’s range of functions to your needs using menus and sub-menus. Menus and sub-menus can be accessed by scrolling using the Navigation keys or by using the shortcuts. Accessing a Menu Function by Scrolling 1. In Idle mode, press the Menu soft key. 2. Scroll using the Up and Down keys to reach a main menu, Phone Settings for example. Press the Select soft key or the Right key to enter the menu. 3.
Using the Menus Accessing a Menu Function by Using Its Shortcut The menu items, such as menu, sub-menus and options, are numbered and can be accessed quickly by using their shortcut numbers. The shortcut number is shown at the bottom right next to the soft key on the display. Simply press the Menu soft key and enter the number of the menu you want. Note: The numbers assigned to each menu are indicated on the list on the next page.
Using the Menus 1. Messages (see page 60) 1.1 1.2 1.3 1.4 1.5 Inbox Outbox Write New Templates Settings 1.5.1 Setting 1* 1.5.2 Setting 2* 1.5.3 Common Setting 1.6 My Objects 1.6.1 My EMS Melody 1.6.2 My EMS Picture 1.6.3 My EMS Animation 1.6.4 Delete All 1.7 Delete All 1.8 Memory Status 1.8.1 SIM Memory 1.8.2 PHONE Memory 1.8.3 CB Memory 1.9 Voice Mail 1.9.1 Connect to Voice Mail 1.9.2 Voice Mail Number 1.10 Broadcast 1.10.1 Read 1.10.2 Receive 1.10.3 Channel List 1.10.
Using the Menus 2. Call Records (see page 72) 2.1 2.2 2.3 2.4 Missed Calls Incoming Calls Outgoing Calls Delete All 2.4.1 Missed Calls 2.4.2 Incoming Calls 2.4.3 Outgoing Calls 2.5 Call Time 2.5.1 Last Call Time 2.5.2 Total Outgoing 2.5.3 Total Incoming 2.5.4 Reset Timers 3. Sound Settings 3.1 3.2 3.3 3.4 3.5 3.6 (see page 75) Ring Tone Ring Volume More Ringtones Alert Type Keypad Tone Message Tone 3.6.1 SMS Tone 3.6.2 SMS-CB Tone 3.7 Folder Tone 3.8 Power On/Off 3.
Using the Menus 4. Phone Settings (see page 80) 4.1 My Settings 4.1.1 Wallpaper 4.1.2 Menu Style 4.1.3 More Graphics 4.2 Greeting Message 4.3 Own Number 4.4 Language 4.5 Security 4.5.1 PIN Check 4.5.2 Change PIN 4.5.3 Phone Lock 4.5.4 Change Password 4.5.5 SIM Lock 4.5.6 FDN Mode* 4.5.7 Change PIN2* 4.6 Display Settings 4.6.1 Contrast 4.6.2 Back Light 4.6.3 Auto Light 4.6.4 Service Light 4.6.5 Graphic Logo 4.7 Extra Settings 4.8 Short Cut 4.8.1 Key Up 4.8.2 Key Down 4.8.3 Key Right 4.8.4 Key Left 4.
Using the Menus 5. Organizer (see page 89) 5.1 Calendar 5.2 To Do List 5.3 Time & Date 5.3.1 Set Time 5.3.2 Set Date 5.3.3 World Time 5.3.4 Time Format 5.4 Alarm 5.4.1 Once Alarm 5.4.2 Daily Alarm 5.4.3 Morning Call 5.4.4 Remove Alarm 5.4.5 Autopower 5.5 Calculator 5.6 Currency Exchange 6. Network Services (see page 100) 6.1 Call Forwarding 6.1.1 Forward Always 6.1.2 Busy 6.1.3 No Reply 6.1.4 Unreachable 6.1.5 Cancel All 6.2 Call Barring 6.2.1 All Outgoing 6.2.2 International 6.2.
Using the Menus 6.5 Caller ID 6.6 Closed User Group 6.6.1 Index List 6.6.2 Outside Access 6.6.3 Default Group 6.6.4 Deactivate* 7. Funbox (see page 108) 7.1 Games 7.2 More Games 7.3 WAP Browser 7.3.1 Home 7.3.2 Favorites 7.3.3 http:// 7.3.4 Settings 7.3.5 Clear Cache 7.3.6 Push Message 7.4 Downloads 7.4.1 Games & More 7.4.2 Sounds 7.4.3 Pictures 7.4.4 DNS Setting * Shows only when a Closed User Group is activated.
Messages Short Message Service (SMS) allows you to send and receive short text messages to and from other GSM mobile phones. In addition, your phone supports the Enhanced Messaging Service (EMS), which enables you to include simple pictures, melodies, and animated images in your messages. To use this feature, you must subscribe to your service provider’s message service. When the Message icon ( ) appears, you have received new text messages.
Messages While reading a message, you can choose the following options by pressing the Options soft key: Delete: allows you to delete the message. Forward: allows you to resend the message. For further information about how to send a message, see page 63. Reply: allows you to reply to the sender by sending a text message. Call Back: allows you to call the sender back.
Messages 1. Select a message from the list and press the View soft key to read the message contents. 2. To scroll through the contents, press the Up or Down key. 3. To scroll to the previous or next message, press the or key. While reading a message, you can choose the following options by pressing the Options soft key: Delete: allows you to delete the message. Send: allows you to resend the message. For further information about how to send a message, see page 63.
Messages Creating a Simple Text Message 1. Create your message. Note: For more information about entering characters, see page 40. 2. When you finish entering your message, press the Options soft key. The following options are available: • Send: allows you to send the message. The message is deleted after sending. • Save and Send: allows you to save a copy of the message to the Outbox and then send the message. • Save: allows you to save the message in the Outbox so that it can be sent later.
Messages Creating a Message Using the Options 1. Create your message. 2. Press the Options soft key. 3. Select one of the following options by using the Up and Down keys and pressing the Select soft key. • Text Formatting: allows you to format the style of the text. For the Size attribute, Normal, Large and Small sizes are available. For the Underline and Strikethrough attributes, select On or Off. The attributes can be combined.
Messages 4. Complete the message, and send or save it by following the procedure from step 2 on page 63. Templates (Menu 1.4) Using this menu, you can preset messages that you use most frequently. Select an empty location or the message template you want and press the Options soft key. The following options are available: Edit: allows you to write a new message or edit the message. Note: For further details about how to enter characters, see page 40. Send Message: allows you to retrieve the message.
Messages Settings (Menu 1.5) In this menu, you can set up default message information. A setting group is a collection of settings required to send messages. The number of setting groups available depends on the capacity of your SIM card. Note: The last setting you accessed is automatically activated for sending messages. Setting x (where x is the setting group number): each group has its own sub-menu.
Messages Reply Path: allows the recipient of your message to send you a reply message using your message center, if your network supports this service. Delivery Reports: allows you to activate or deactivate the report function. When this function is activated, the network informs you whether or not your message has been delivered. Bearer Selection: allows you to choose either GSM or GPRS, depending on your network. My Objects (Menu 1.
Messages You can delete all of the items using the Delete All option (Menu 1.6.4). To Press the select a category Up or Down key. To delete all of your objects, select All Object. place a check mark Mark soft key. remove the check mark Unmark soft key. delete the marked objects Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Delete All (Menu 1.7) Select this option to delete all messages stored in SIM, phone, and Cell Broadcast memory.
Messages To Press the select a message type Up or Down key. To delete all of your messages, select All Messages. place a check mark Mark soft key. remove the check mark Unmark soft key. delete the marked messages Delete soft key. When a confirming message displays, press the Yes soft key to confirm. Voice Mail (Menu 1.9) This menu provides you with a way of accessing your voice mailbox, if provided by your network.
Messages Voice Mail Number: allows you to change the voice mail server number, if necessary. To Press the enter the server number corresponding numeric keys. correct a digit C key. move the cursor to the left/right without clearing the digit Left or Right key. Note: Voice Mail is a network feature. Please contact your service provider for further details. Broadcast (Menu 1.10) This network service allows you to receive text messages on various topics, such as the weather or traffic.
Messages as the phone is switched off. Scroll through the message using the Up and Down keys. While reading a message, press the Save soft key to store the message in the Archive box for later retrieval. Receive: allows you to enable or disable the reception of broadcast messages. Channel List: allows you to indicate the channels from which you wish to receive cell broadcast messages.
Call Records In this menu, you can view the: • calls you missed, received or dialed. • length of your calls. • cost of your calls. Note: You can access the numbers in the three types of call records by pressing the key in Idle mode. Missed Calls (Menu 2.1) This menu lets you view the numbers of the last 20 unanswered calls. The number and name, if available, display together with the date and time when the call was received. By pressing the Options soft key, you can: • delete the call from the list.
Call Records By pressing the Options soft key, you can: • delete the call from the list. • edit the number, if available, and save it in Phonebook. You can also dial the number by pressing the Outgoing Calls key. (Menu 2.3) This menu lets you view the last 20 numbers you dialed. The number and name display, together with the date and time when the call was made. By pressing the Options soft key, you can: • delete the number. • edit the number and save it in Phonebook.
Call Records Call Time (Menu 2.5) This menu lets you view the timers for calls you made and received. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, such as rounding-off for billing purposes. The following options are available: Last Call Time: length of the last call. Total Outgoing: total length of all calls you made since the timer was last reset. Total Incoming: total length of all calls you received since the timer was last reset.
Sound Settings You can use the Sound Settings feature to customize various settings, such as the: • ring melody, volume and type. • sounds made when you press a key, receive a message, open/close the folder or switch your phone on/off. • alert tone made every minute during a call, when you make an error or when your call is connected to the system. Note: When the phone is in Silent mode (see page 28), you cannot change the sound settings. Ring Tone (Menu 3.1) This menu allows you to select a ring melody.
Sound Settings More Ringtones (Menu 3.3) This option opens the WAP browser to a web site where you can download additional ringtones. Alert Type (Menu 3.4) This menu allows you to specify how you are to be informed of incoming calls. The following options are available: Light Only: the service light flashes the phone neither rings nor vibrates. Melody: the phone rings using the ring melody selected in the Ring Tone menu (Menu 3.1). Vibration: the phone vibrates but does not ring.
Sound Settings Message Tone (Menu 3.6) This menu allows you to select how the phone informs you that a new message has been received. SMS Tone (Menu 3.6.1) The following options are available for alerting you to new SMS messages: Off: the phone does not use the SMS tone. Light Only: the service light flashes. Vibration: the phone vibrates. Single Beep: the phone beeps once. SMS Tones: the phone uses one of several SMS tones. SMS-CB Tone (Menu 3.6.
Sound Settings Folder Tone (Menu 3.7) This menu allows you to select the tone that the phone sounds when you open or close the folder. To turn the sound off, select Off. Power On/Off (Menu 3.8) This menu allows you to select the melody that the phone sounds when it is switched on and off. To turn the sound off, select Off. Extra Tones (Menu 3.9) You can customize additional tones used for the phone. To turn a given tone Press the on ON soft key. A check mark displays in front of the option.
Sound Settings The following options are available: Error Tone: sets whether or not the phone informs you when you have make a mistake. Minute Minder: sets whether or not the phone beeps every minute during an outgoing call to keep you informed of the length of your call. Connect Tone: sets your phone to beep when your call is connected to the system.
Phone Settings Many different features of your phone can be customized to suit your preferences. All of these features are accessed in the Phone Settings menu. My Settings (Menu 4.1) You can change the background image and the display style for Menu mode according to your preference. Wallpaper (Menu 4.1.1) This option allows you to change the background image to be displayed in Idle mode. To change the background image: 1.
Phone Settings Menu Style (Menu 4.1.2) This menu allows you to select the menu display style. You can choose either Folder Style or Page Style. More Graphics (Menu 4.1.3) This option opens the WAP browser to a web site where you can download additional graphics. Greeting Message (Menu 4.2) This menu allows you to set a greeting to be displayed briefly when the phone is switched on. To Press the clear the existing message C key and hold it down until the message is cleared.
Phone Settings Language (Menu 4.4) You can select a display language. When the language option is set to Automatic, the language is automatically selected according to the language of the SIM card used. Security (Menu 4.5) The Security feature enables you to restrict the use of your phone to the people and the types of calls of your choice Various codes and passwords are used to protect the features of your phone. They are described in the following sections. See also pages 122-124.
Phone Settings Change PIN (Menu 4.5.2) This feature allows you to change your current PIN, provided that the PIN Check feature is enabled. You must enter the current PIN before you can specify a new one. Once you have entered a new PIN, you are asked to confirm it by entering it again. Phone Lock (Menu 4.5.3) When the Phone Lock feature is enabled, the phone is locked and you must enter the 8-digit phone password each time the phone is switched on. The password is preset to “00000000” at the factory.
Phone Settings The password is preset to “00000000” at the factory. Once you have entered a new password, you are asked to confirm it by entering it again. SIM Lock (Menu 4.5.5) When the SIM Lock feature is enabled, your phone only works with the current SIM. You must enter the SIM lock code to unlock the SIM so you can use a different SIM card. Once you have entered the lock code, you are asked to confirm your entry. FDN Mode (Menu 4.5.
Phone Settings Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display. Display Settings (Menu 4.6) In this menu, you can change the settings for the display or backlight. Contrast (Menu 4.6.1) This menu allows you to adjust the contrast of the display screen to see them better in different lighting conditions. Adjust the contrast using the Up and Down keys or the Volume keys on the left side of the phone. Back Light (Menu 4.6.
Phone Settings Auto Light (Menu 4.6.3) Using this feature, you can specify the time for which the backlight is to be used. This feature helps you to conserve your battery power. The following options are available: Disable: the backlight is used according to the setting in the Back Light menu (Menu 4.6.2); see page 85. Enable: the backlight is used only during the specified period of time. Set the time when the phone turns the light on and then turn it off, using the appropriate number keys.
Phone Settings Extra Settings (Menu 4.7) You can turn the automatic redialing or answering features on or off. To turn a feature Press the on ON soft key. A check mark displays in front of the option. off OFF soft key. The check mark no longer displays. The following options are available: Auto Redial: when this option is checked, the phone makes up to ten attempts to redial a phone number after an unsuccessful call. Note: The interval between two call attempts varies.
Phone Settings Short Cut (Menu 4.8) The Navigation keys can be used as shortcut keys. In Idle mode, they allow you to access specific menus directly. To assign a shortcut to a key: 1. Select the key to be used as a shortcut key by pressing the Up or Down key, and press the Select soft key. • Key Up • Key Down • Key Right • Key Left 2. Select the menu to be assigned to the key by pressing the Up or Down key. Note: To deactivate a shortcut key, select the None option. 3.
Organizer The Organizer feature enables you to: • view the calendar and organize your schedule. • define a list of things to do. • set the current date and time. • set the alarm so that the phone rings at a specific time, such as to remind you of an appointment. • use the phone as a calculator for basic mathematical equations or currency exchange operations. Calendar (Menu 5.1) With the Calendar feature, you can: • consult the calendar. • write memos to keep track of your schedule.
Organizer Delete All: allows you to delete all of the memos. You are asked to confirm your action. Go to Date: allows you to jump to a specific date. Exit: exits the Calendar feature and returns to Idle mode. Writing a Memo To write or edit a memo on a specific date: 1. Select a date on the calendar, using the Navigation keys. Note: To skip to the previous or next month, press the Volume keys on the left side of the phone. 2. Press the Select soft key.
Organizer 5. If you pressed the Yes soft key, set the time for the alarm and press the OK soft key. You can also select the melody for the alarm by pressing the Melody soft key. 6. Select either AM or PM and press the Select soft key. Note: Your phone is preset to use 12-hour format. To change the time format, see page 97. The color of the date on the calendar changes to green to indicate that a memo exists for that date.
Organizer To Do List (Menu 5.2) This feature allows you to: • enter a list of tasks to be done. • assign a priority and a deadline to each task. • sort the tasks by priority and status mark. Creating the To Do List 1. Press the New soft key. 2. Enter the first task. Note: You can enter up to 40 characters. For further details about how to enter characters, see page 40. 3. Press the OK soft key. 4. Select high, normal or low priority using the Up or Down key and press the Select soft key. 5.
Organizer Action Procedure View the details 1. Highlight the task. for a specific task 2. Press the View soft key. 3. Scroll through the tasks using the Up and Down keys. Change the status 1. Highlight the task. of a specific task 2. Press the key to mark the task as completed as of the current date and time. or 1. Highlight the task. 2. Press the Options soft key. 3. Select the Mark option. 4. Select the appropriate status (Done or Undo). Create a new task 1. Press the Options soft key. 2.
Organizer Action Procedure (continued) Edit an existing task 1. Highlight the task. 2. Press the Options soft key. 3. Select the Edit option. 4. Change the text, priority and/or deadline for the task. Sort the existing tasks by priority or status 1. Press the Options soft key. 2. Select the Sort option. 3. Select the sort criterion (High, Low, Done or Undo). Copy a task 1. Highlight the task. 2. Press the Options soft key. 3. Select the Copy option. 4.
Organizer Action Procedure (continued) Copy a task to the 1. Highlight the task. calendar 2. Press the Options soft key. 3. Select the Copy to Calendar option. 4. Change the text and/or deadline for the task and set the alarm. Delete a task 1. Highlight the task. 2. Press the Options soft key. 3. Select the Delete option. Delete all tasks 1. Press the Options soft key. 2. Select the Delete All option. 3. Confirm the deletion by pressing the OK soft key. Exit the To Do list 1.
Organizer Time & Date (Menu 5.3) This menu allows you to change the current time and date displayed. You can also check the current time for 22 major cities around the world. The following options are available: Set Time: allows you to enter the current time. You can choose the time format in the Time Format menu (Menu 5.3.4). See below. Note: Before setting the time, you must specify your time zone in the World Time menu (Menu 5.3.3). Set Date: allows you to enter the month, day and year.
Organizer To select your time zone: 1. Select the city corresponding to your time zone by pressing the Left or Right key one or more times. The local date and time display. 2. Press the Set soft key. Time Format: allows you to change the time format to 24 Hours or 12 Hours. Alarm (Menu 5.4) This feature allows you to: • set the alarm to ring at a specific time. • set the phone to switch on automatically and ring the alarm even if the phone is switched off.
Organizer To set the alarm: 1. Choose the type of alarm to be set and press the Select soft key. 2. Enter the time for the alarm to sound. If you want to use the alarm options, press the Options soft key. The following options are available: • Remove Alarm: deactivates the current alarm. • Alarm Sound Set: allows you to select an alarm melody. 3. Press the OK soft key. 4. Choose AM or PM using the Up and Down keys and press the Select soft key. Note: Your phone is preset to use 12-hour format.
Organizer Calculator (Menu 5.5) With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication and division. 1. Enter the first number using the numeric keys. Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays. 2. Press the right soft key until the symbol you want displays: + (addition), - (subtraction), * (multiplication), / (division). 3.
Network Services These menu functions are network services. Please contact your service provider to check their availability and subscribe to them, if you wish. Call Forwarding (Menu 6.1) This network service enables incoming calls to be rerouted to the number that you specify. Example: You may wish to forward your business calls to a colleague while you are on holiday. You can use the following options to forward voice calls and/or data calls: Forward Always: all calls are forwarded.
Network Services To set your call forwarding options: 1. Select a call forwarding option by pressing the Up or Down key and then press the Select soft key. 2. Select the type of calls, voice or data, by pressing the Up or Down key and then press the Select soft key. The current status displays. If the option has already been set, the number to which the calls are forwarded displays. 3. To Press the activate call forwarding Activate soft key. Go to step 4. change the call number Change soft key.
Network Services Call Barring (Menu 6.2) The call barring network service allows you to restrict your calls. You can use the following options to restrict voice and/or data calls: All Outgoing: calls cannot be made. International: international calls cannot be made. International Except to Home: when abroad, calls can be made only to numbers within the current country and to your home country, which is the country where your home network provider is located. All Incoming: calls cannot be received.
Network Services 4. Enter your call barring password supplied by your service provider. The phone sends your settings to the network and the network’s acknowledgement displays. To deactivate specific call barring settings: 1. Select the call barring option to be deactivated. 2. Select the type of calls to which this option applies. 3. Press the Deactivate soft key. 4. Enter your call barring password supplied by your service provider.
Network Services Call Waiting (Menu 6.3) This network service informs you when someone is trying to reach you during another call. You can specify individual call waiting options for voice calls and/or data calls. To set your call waiting options: 1. Select the type of calls, voice or data, to which the call waiting option is to be applied by pressing the Up or Down key and then press the Select soft key. The screen informs you whether call waiting is activated or deactivated. 2.
Network Services To indicate to automatically or manually select the network when roaming: 1. When Network Selection displays, press the Select soft key. 2. Press the Up or Down key until the appropriate option highlights, then press the OK soft key. If you select Automatic, you are connected to the first available network when roaming. If you select Manual, the phone scans for the available networks. Go to Step 3. 3.
Network Services Closed User Group (CUG) (Menu 6.6) This network service allows incoming and outgoing calls to be restricted to a selected user group. You can create up to ten user groups. For details on how to create and use a closed user group, contact your service provider. Example: A company lends SIM cards to its employees and wants to restrict outgoing calls to members of the same team. Activating a Closed User Group If you select the Closed User Group menu, you can enter the CUG function.
Network Services To scroll through the existing CUG indexes Press the Up or Down key. add a new CUG index Options soft key, select the Add option and enter the index. delete a CUG index Options soft key and select the Delete option. activate a CUG index Options soft key and select the Activate option. Outside Access: lets you enable or disable calls to numbers other than those in the Closed User Group. This feature depends on the nature of your CUG subscription.
Funbox The Funbox menu contains several fun options. Games (Menu 7.1) You can enjoy two games with your phone. Scroll to a game, using the Up and Down keys and press the Select soft key. For each game, the following options are available: New game: allows you to start a game. High Score: shows you the High Score table. Key Info.: shows you the key operation for the game. Continue: allows you to continue the last game you played.
Funbox More Games (Menu 7.2) This option opens the WAP browser to a web site where you can download additional games. WAP Browser (Menu 7.3) Your phone is equipped with a WAP (Wireless Application Protocol) browser to allow you to access and navigate the Wireless Web using your phone. Home (Menu 7.3.1) Selecting this menu connects the phone to the network and loads the homepage of the Wireless Web service provider. You can also press the key in Idle mode.
Funbox Navigating the WAP Browser To Press the scroll through and Up or Down key until the select browser items symbol points to the required item, and then press the OK soft key to confirm the selection. select a numbered item corresponding numeric key. return to the previous page Back soft key or the key. return to the startup key and select the Home menu. For further details homepage about this option, see page 111.
Funbox Number (1): allows you to enter numbers. To change the text input mode Press the times. key one or more To enter a space Press the key. To edit text 1. Set the cursor to the right of the character(s) to be corrected. 2. Press the key as required. 3. Enter the correct character(s). Selecting and Using Menu Options Various menus are available when you are using the WAP Browser to navigate the Wireless Web. To access a menu option: 1. Press and hold down the A menu displays. key. 2.
Funbox The following options are available: Reload: reloads the current page. Home: takes you back at any time to the homepage of the Wireless Web service provider. Goto URL: allows you to manually enter the URL address of a Web page. After entering an address, press the OK soft key to go there directly. Show URL: displays the URL address of the site to which you are currently connected. It also enables you to declare the current site as the startup homepage.
Funbox Favorites (Menu 7.3.2) This menu allows you to store the URL addresses of your favorite web sites. You can access this menu directly by pressing and holding down the key while using the WAP Browser. To store a URL address: 1. Select an empty location and press the Options soft key. 2. Enter the address and press the Enter soft key. Note: For further details about how to enter characters, see page 40. 3. Enter a name for the favorite item and press the Enter soft key.
Funbox Settings (Menu 7.3.4) This option allows you to set up five proxy servers for the WAP browser. Contact your service provider for details. For each server, the following options are available: Profile Name: enter a name that you wish to assign to the HTTP proxy server. Homepage URL: set the address of your startup homepage. When the default homepage displays, you can delete it using the key and enter your own choice. Security: set the data transmission mode.
Funbox When the bearer is set to Data Login Name: enter the PPP server login ID. Password: enter the PPP server password. Dial-up Number: enter the PPP server phone number. Data Call Type: select a data call type: Analog or ISDN. Note: The WAP Browser settings may vary, depending on the service provider. Contact your service provider for further information. Clear Cache (Menu 7.3.
Funbox Downloads (Menu 7.4) You can download images, sounds and MIDlets (Java applications running on mobile phones) from various sources using the WAP Browser and store them in your phone. In the Downloads menu, you can access the downloaded items. Games & More (Menu 7.4.1) When you access this menu, the list of the default games appears. Once you have downloaded MIDlets, they are added to the list. For more details about how to download MIDlets in the WAP browser, see page 111. Launching a MIDlet 1.
Funbox Update: accesses the server and updates the MIDlet. This option is not available for the default games. Entering Text If you need to enter text while using a MIDlet, you can use the following input modes: ABC: allows you to enter upper-case English characters. abc: allows you to enter lower-case English characters. 123: allows you to enter numbers. Sym: allows you to enter symbols. After highlighting a symbol by pressing the Navigation keys, press the key to insert it.
Funbox Rename: allows you to change the name of the sound. Delete: deletes the sound. Set as Ring Tone: sets the sound as your ring tone. Pictures (Menu 7.4.3) In this menu, you can view the list of pictures downloaded from the web server or received in messages. You can set the downloaded pictures as the current background image or send them to other phones. When memory is full, a warning message displays and the phone rejects additional sounds until you erase obsolete ones.
Solving Problems If you are experiencing problems with your phone, perform the following simple checks before contacting a service professional. This may save you the time and expense of an unnecessary service call. When you switch your phone on, the following messages may appear Insert SIM Card • Check that the SIM card is correctly installed. Phone Locked Enter Password • The automatic locking function has been enabled. You must enter the phone’s password before you can use the phone.
Solving Problems “No service,” “Network failure” or “Not done” displays • The network connection was lost. You may be in a weak signal area (in a tunnel or surrounded by buildings). Move and try again. • You are trying to access an option for which you have not taken out a subscription with your service provider. Contact the service provider for further details.
Solving Problems The phone starts beeping and “**Warning** Low Battery” flashes on the display • The battery is insufficiently charged. Recharge the battery. The audio quality of the call is poor • Check the signal strength indicator on the display ( ); the number of bars indicates the signal strength from strong ( ) to weak ( ). • Try moving the phone slightly or moving closer to a window if you are in a building.
Access Codes There are several access codes that are used by your phone and its SIM card. These codes help you protect the phone against unauthorized use. When requested for any of the codes explained below, enter the appropriate code (displayed as asterisks) and press the OK soft key. If you make a mistake, press the key until the incorrect digit is cleared and then continue entering the correct code. The access codes, except for the PUK and PUK2 codes can be changed using the Security menu (Menu 4.5).
Access Codes PIN The Personal Identification Number or PIN (4 to 8 digits) protects your SIM card against unauthorized use. It is usually supplied with the SIM card. If you enter an incorrect PIN three times in succession, the code is disabled and cannot be used until you re-enable it by entering the PUK. See below. To See activate/deactivate the PIN Check feature page 82 (Menu 4.5.1). change the PIN page 83 (Menu 4.5.2). PUK The 8-digit PUK (PIN Unblocking Key) is required to change a disabled PIN.
Access Codes PIN2 The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to access specific functions, such as setting the maximum cost of a call. These functions are available if supported by your SIM card. If you enter an incorrect PIN2 three times in succession, the code is disabled and you cannot access the functions until you re-enable it by entering the PUK2. To change the PIN2, see page 84 (Menu 4.5.6).
Health and Safety Information Exposure to Radio Frequency (RF) Signals Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Health and Safety Information SAR tests are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.
Health and Safety Information For Body Operation For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung-supplied or approved accessory designated for this product or when used with and accessory that contains no metal and that positions the handset a minimum from the body. The minimum distance for this model phone is written in the FCC certification information from the body.
Health and Safety Information Precautions When Using Batteries • Never use any charger or battery that is damaged in any way. • Use the battery only for its intended purpose. • If you use the phone near the network’s base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. • Battery charging time depends on the remaining battery charge and the type of battery and charger used.
Health and Safety Information the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F). • Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and – terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag.
Health and Safety Information wireless phone with one of the many hands-free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions.
Health and Safety Information 9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you. 10.If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or any other special non-emergency wireless number.
Health and Safety Information Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives. Pacemakers Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.
Health and Safety Information wish to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so.
Health and Safety Information Potentially Explosive Environments Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch the phone off while at a refueling point (service station).
Health and Safety Information Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. To make an emergency call: 1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location (for example, 911 or other official emergency number).
Health and Safety Information • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. • For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area.
Health and Safety Information • Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone. • Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged. • Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store the phone in cold areas.
Health and Safety Information Acknowledging Special Precautions and the FCC and Industry Canada Notice Cautions Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received.
Health and Safety Information This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Appendix A: CERTIFICATION INFORMATION (SAR) Appendix A: CERTIFICATION INFORMATION (SAR) THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency(RF) energy set by the Federal Communications Commission of the U.S. Government.
Appendix A: CERTIFICATION INFORMATION (SAR) does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are performed in positions and locations(e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR values for this model phone as reported to the FCC are Head: 1.37W/Kg, Body-worn: 0.689W/Kg.
Appendix B: Guide to Safe and Responsible Wireless Phone Use Appendix B: Guide to Safe and Responsible Wireless Phone Use Cellular Telecommunications & Internet Association “Safety is the most important call you will ever make.” A Guide to Safe and Responsible Wireless Phone Use TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE WIRELESS TELEPHONE.
Appendix B: Guide to Safe and Responsible Wireless Phone Use road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seat belts and requiring other passengers to do the same. But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car.
Appendix B: Guide to Safe and Responsible Wireless Phone Use where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. 4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions.
Appendix B: Guide to Safe and Responsible Wireless Phone Use 8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations-with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone! 9.
Appendix B: Guide to Safe and Responsible Wireless Phone Use we take to the roads, we all have a responsibility to drive safely. “The wireless industry reminds you to use your phone safely when driving.” Cellular Telecommunications & Internet Association For more information, please call 1-888-901-SAFE. For updates: http://www.wow-com.com/consumer/issues/ driving/articles.
Appendix C: Consumer Update on Wireless Phones Appendix C: Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell, mobile, or PCS phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user s head.
Appendix C: Consumer Update on Wireless Phones adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 3.
Appendix C: Consumer Update on Wireless Phones FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level.
Appendix C: Consumer Update on Wireless Phones FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996.
Appendix C: Consumer Update on Wireless Phones how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance.
Appendix C: Consumer Update on Wireless Phones wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 7. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort.
Appendix C: Consumer Update on Wireless Phones forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. 9.
Appendix C: Consumer Update on Wireless Phones FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem. 10.What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods.
Appendix C: Consumer Update on Wireless Phones of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 11.What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years.
Appendix C: Consumer Update on Wireless Phones Additional information on the safety of RF exposures from various sources can be obtained from the following organizations. FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/ Environmental Protection Agency (EPA): http://www.epa.gov/radiation/ Occupational Safety and Health Administration’s (OSHA): http://www.osha-slc.gov/SLTC/radiofrequencyradiation/ index.html National Institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/emfpg.
Appendix C: Consumer Update on Wireless Phones Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
Appendix C: Consumer Update on Wireless Phones 4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or new parts or components when repairing any Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases, pouches and holsters will be warranted for a period of ninety (90) days.
Appendix C: Consumer Update on Wireless Phones BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/ PROVINCE TO PROVINCE.
Appendix C: Consumer Update on Wireless Phones Samsung Telecommunications America, L.P. 1130 East Arapaho Road Richardson, Texas 75081 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) ©2002 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Glossary To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the features on your mobile phone, here are a few definitions. Call Forwarding Ability to reroute calls to another number. Call Holding Ability to put one call on standby while answering or making another call; you can then switch between the two calls, as required. Call Waiting Ability to inform users that they have an incoming call when engaged on another call.
Glossary EMS (Enhanced Message Service) An adaptation of the Short Message Service (SMS) that allows you to send and receive ring tones and service provider’s logo, as well as combinations of simple media to and from EMS-compliant handsets. Because EMS is based on SMS, it can use SMS centres the same way that SMS does. EMS works on all Global System for Mobile communications (GSM) networks.
Glossary PIN (Personal Identification Number) Security code that protects the phone/SIM against unauthorized use. The PIN is supplied by the service provider with the SIM card. It may be a four to eight-digit number and can be changed, as required. Proxy Server A server that resides between a web client, such as a web browser, and a real Web server and acts as an intermediary between them. When some people browse a web site, their browser is not actually connecting to the web server.
Glossary SIM (Subscriber Identification Module) Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscriber’s personal data). The SIM card fits into a small slot on the back of the phone and is protected by the battery. SMS (Short Message Service) Network service sending and receiving messages to and from another subscriber without having to speak to the correspondent.
Index A Access codes • 122 Alarm • 97 Alert type • 76 Answering call • 24 second call • 50 Anykey answer • 87 Auto redial • 87 B Background image • 80 Backlight auto light • 86 description • 14 time, set • 85 Barring, calls • 102 Battery charging • 17 installing • 17 low indicator • 19 precautions • 128 removing • 17 Broadcast messages • 70 Browser, WAP • 109 C Calculator • 99 Calendar memos copying • 91 erasing • 91 viewing • 89 writing • 90 Call back, message • 61 Call costs • 75 Call records incoming •
Index E K Earpiece volume • 24 Emergency calls • 134 EMS (Enhanced Message Service) • 60 Error tone • 79 Key volume • 24 Keypad tones selecting • 76 sending • 48 Keys description • 9 location • 8 shortcut • 88 F FDN (Fixed Dial Number) mode • 84 Folder tone • 78 Forwarding, calls • 100 Funbox • 108 G Games • 108 Graphic logo • 86 Greeting message • 88 H Health and safety • 125 Holding, call • 46 I Icons, description • 12 Inbox, messages • 60 International calls • 21 Internet • 109 J Java service •
Index Missed calls • 25, 72 Morning call • 97 Multi-party calls • 51 Muting all sounds • 28 key tones • 48 microphone • 47 N Names entering • 40 searching/dialing • 35 Network selection • 104 Network services • 100 Numbers, phone searching/dialing • 35 storing • 31 O On/off switch, phone • 19 Organizer • 89 Outbox, messages • 61 Own number • 81 P Password call barring • 103 phone • 83, 122 Phone care and maintenance • 136 display • 11 icons • 12 keys • 9 layout • 8 locking • 83 password • 122 resetting
Index Sent messages, text • 61 Service light • 14, 86 Shortcut, menu • 88 SIM card installing • 15 SIM Lock • 84 SMS (Short Message Service) Inbox • 60 Outbox • 61 Soft keys • 29 Sound settings • 75 Sounds, downloaded • 117 Speed-dialing • 38 Switching on/off microphone • 47 phone • 19 Symbol mode, text input • 45 T T9 mode, text input • 42 Tasks, to do list creating • 92 editing • 92 Templates, message, text • 65 Text input mode • 41 Text message creating/sending • 62 deleting • 61, 62 reading • 60, 61 s
5 Press the Select soft key. 4 Scroll with the Up and Down keys through the list of the options until the required one is selected. 3 Press the Select soft key. 2 Scroll with the Up and Down keys through the list of the menus until you reach the required menu. 1 Press the Menu soft key. Each of the two soft keys ( and ) perform the function indicated by the text above it, on the bottom line of the display. Access the Menu Functions 1 Key in the number. 2 Press the key.
Adjust the Volume Answer a Call 1 Select the Alert Type menu option (Menu 3.4). Press the or key on the left side of the phone. Open the phone or Press the key. 3 Press the Select soft key. 2 Highlight Mute or Unmute. 1 Press the Options soft key. 3 Press the Select soft key.
