Инструкция по использованию

Specifications
Category
SH-S162L(TS-H652L)
DVD Writer
DISC
Usable Discs
DVD
: DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM,
DVD-Video, DVD+R (Dual), DVD-R (Dual), LightScribe
DVD±R, DVD-RAM
CD
: CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G)
CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD
CD-I, CD-I Bridge (Photo-CD, Video-CD),
Multisession CD (Photo-CD, CD-EXTRA, Portforio)
LightScribe CD-R
Disc
Diameter
4.72 Inch or 3.15 Inch (120mm or 80mm)
Interface Support
Interface
Port
ATA/ATAPI (E-IDE)
PIO mode PIO Mode 4: 16.6MB/sec
DMA mode Ultra DMA Mode 2: 33.3MB/sec
ACCESS TIME
(Random)
CD-ROM 110ms (Random)
DVD-ROM 130ms (Random)
Disc
Labeling
Time
Setting Titles only
Titles and contents
The entire label area
(including graphics)
Best
Less than 4 min Less than 9 min Less than 36 min
Normal
Less than 3 min Less than 7 min Less than 28 min
Draft
Less than 2 min Less than 4 min Less than 20 min
Data Transfer Speed
(Max)
Media Type
Write
Read
DVD+R PCAV 16X (21.6MB/sec) CAV 12X (16.2MB/sec)
DVD+RW Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec)
DVD+R DUAL Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec)
DVD-R DUAL Z-CLV 4X (5.4MB/sec) CAV 8X (10.8MB/sec)
DVD-R PCAV 16X (21.6MB/sec) CAV 12X (16.2MB/sec)
DVD-RW Z-CLV 6X (8.1MB/sec) CAV 8X (10.8MB/sec)
DVD-ROM(Single) - CAV 16X (21.6MB/sec)
DVD-ROM(Dual) - CAV 8X (10.8MB/sec)
DVD-RAM PCAV 5X(13.5MB/sec) CAV 5X(13.5MB/sec)
CD-ROM - CAV 48X(7.2MB/s)
CD-R PCAV 48X (7.2MB/sec) CAV 40X (6.0MB/sec)
US-RW PCAV 32X (4.8MB/sec) CAV 40X (6.0MB/sec)
HS-RW CLV 10X (1.5MB/sec) CAV 40X (6.0MB/sec)
CD-RW CLV 4X (0.6MB/sec) CAV 40X (6.0MB/sec)
Buffer Memory
2MB
Drive Installation
Horizontal / Vertical
Operating Environment
Temperature 41°F ~ 122°F (5°C ~ 45°C)
Humidity 10% ~ 80% (RH)
Size(Width x Height x Length)
5.34 X 1.65 X 7.24 Inch (148.2 X 42 X 184mm)
Weight
760g
Note
Does not support DVD-R for Authoring.
Cannot playback or record on both sides of a two-sided disc simultaneously.
The read/write capacity of the supported discs depends on the condition of the disc
and the recording format of the drive. Therefore, the read/write quality may not be perfect.
Severe vibration or external impact may decrease the quality of printed images.
Please firmly place the product onto the PC before use.
In case of disk identification error message, thoroughly clean the surface of the disk
where the label is presented and then start printing.