User manual

English _6
When done, adjust the optical axis and insert the cover.
To attach to the pole
Pull out the cables from the wiring hole of the pole; insert the
U-shaped pole bracket to the pole
Attach the sensor to the bracket and arrange the cables as
necessary.
same as in wall-mounting
Put the cover as original.
Pole external diameter: Φ38~Φ46
Channel Setting (SIA-0120D)
To prevent misalarming due to possible frequency interference between two or more sensors in one place, set the channel
respectively.
4.
1.
2.

3.

Cable-In Hole
Pole Bracket
(optional)
<1 CH> <2 CH> <3 CH> <4 CH>