User’s Guide BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries.
BASIC 1.
1. Introduction This chapter provides information you need to know before using the machine.
Key benefits Environmentally friendly - M282x Series ▪ For single-side printing, 28 ppm (A4) or 29 ppm (Letter). Convenience • To save toner and paper, this machine supports the Eco feature. • To save paper, you can print multiple pages on a single sheet of paper (see "Using advanced print features" on page 158). • To save paper, you can print on both sides of the paper (double-sided printing) (see "Using advanced print features" on page 158).
Key benefits Wide range of functionality and application support • Using the USB cable or a network cable - You can connect and set various wireless network settings using a USB cable or a network cable. • Using the Wi-Fi Direct - You can conveniently print from your mobile device using the Wi-Fi or Wi-Fi Direct feature. • Supports various paper sizes (see "Print media specifications" on page 73).
Features by models Some features and optional goods may not be available depending on model or country. You can install the printer driver and software when you insert the software CD into your CD-ROM drive. Operating System Operating System Software M262x series M282x series Windows ● ● Mac ● ● Linux ● ● Unix (●: Included, Blank: Not available) For Windows, select the printer driver and software in the Select Software to Install window.
Features by models Software SyncThru™ Web Service M262x series M282x series ● ● IPv6 (M262xND only) SyncThru Admin Web Service ● Features Eco printing (M262xND only) ● ● Easy Capture Manager ● ● (●: Included, Blank: Not available) (M262xND only) (M282xND/M282xDW only) ● ● (M282xDW only) ● Double-sided printing (Manual)bc M262x series M282x series Hi-Speed USB 2.
Useful to know The machine does not print. A paper jam has occurred. • Open the print queue list and remove the document from the list (see "Canceling a print job" on page 37). • Open and close the front door. • Remove the driver and install it again (see "Installing the driver locally" on page 20). • Check the instructions on removing jammed paper in this manual and troubleshoot accordingly (see "Clearing paper jams" on page 60). • Select your machine as your default machine in your Windows.
About this user’s guide This user's guide provides information for your basic understanding of the machine as well as detailed steps to explain machine usage. • Read the safety information before using the machine. • If you have a problem using the machine, refer to the troubleshooting chapter. • Terms used in this user’s guide are explained in the glossary chapter. • All illustrations in this user’s guide may differ from your machine depending on its options or model you purchased.
Safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. After reading this section, keep it in a safe place for future reference. 4 Operating environment Warning 3 Important safety symbols Do not use if the power cord is damaged or if the electrical outlet is not grounded.
Safety information 5 Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. Operating method Caution This could result in electric shock or fire. Be careful, the paper output area is hot. Do not forcefully pull the paper out during printing. Burns could occur. It can cause damage to the machine.
Safety information Do not block or push objects into the ventilation opening. Caution This could result in elevated component temperatures which can cause damage or fire. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This machine's power reception device is the power cord. To switch off the power supply, remove the power cord from the electrical outlet.
Safety information 7 Do not place the machine on an unstable surface. The machine could fall, causing injury or machine damage. Maintenance / Checking Use only No.26 AWGa or larger, telephone line cord, if necessary. Otherwise, it can cause damage to the machine. Make sure you plug the power cord into a grounded electrical outlet. Otherwise, this could result in electric shock or fire. Use the power cord supplied with your machine for safe operation.
Safety information Keep the power cable and the contact surface of the plug clean from dust or water. When storing consumables such as toner cartridges, keep them away from children. Otherwise, this could result in electric shock or fire. Toner dust can be dangerous if inhaled or ingested. • Do not remove any covers or guards that are fastened with screws. Using recycled consumables, such as toner, can cause damage to the machine.
Machine overview 9 Accessories Power cord Software CDa Misc. accessoriesb a. The software CD contains the printer drivers, user’s guide, and software applications. b. Miscellaneous accessories included with your machine may vary by country of purchase and specific model. 1.
Machine overview 10 11 Front view Rear view • This illustration may differ from your machine depending on its model. • This illustration may differ from your machine depending on its model. • Some features and optional goods may not be available depending on model or country. • Some features and optional goods may not be available depending on model or country.
Control panel overview This control panel may differ from your machine depending on its model. There are various types of control panels. 3 Info sheeta Prints a demo page and network configuration report (see "Printing a demo page" on page 24). WPSb Configures the wireless network connection easily without a computer (see "Wireless network setup" on page 116). Print screenc Press this button and the green LED will start blinking.
Control panel overview 4 Cancel Stops an operation at any time and there are more functions. • Cancels the current job. • Prints demo page: Press and hold this button for about 2 seconds until the status LED blinks slowly, and release. • Supplies Info & Usage Counter: Press and hold this button for about 6 seconds and release. • Prints configuration reports/network configuration reportsd: Press and hold this button for about 4 seconds until the status LED blinks fast, and release. a. b. c. d.
Turning on the machine 1 Connect the machine to the electricity supply first. Press the power key or turn the switch on if the machine has a power switch. 2 1 2 Press (Power) on the control panel. 1.
Installing the driver locally X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 107). • If the installation window does not appear, from Charms, select Search > Apps and search for Run.
Installing the driver locally From the Windows 8 Start Screen • Samsung Printer Experience app can only be used in the Start screen when V4 driver is installed. The V4 driver is automatically downloaded from the Windows Update if your computer is connected to the Internet. If not, you can manually download the V4 driver from Samsung website, www.samsung.com > find your product > Support or downloads. • You can download Samsung Printer Experience app from the Windows Store.
Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. 4 Insert the software CD into your CD-ROM drive and install the driver again (see "Installing the driver locally" on page 20). 13 Windows 1 Make sure that the machine is connected to your computer and powered on. 2 From the Start menu, select Programs or All Programs > Samsung Printers > Uninstall Samsung Printer Software.
2. Basic setup After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values.
Printing a demo page Print a demo page to make sure that the machine is operating correctly. To print a demo page: In ready mode, press and hold (Cancel) button for about 2 seconds until the status LED blinks, and release. For a model with a Info sheet ( ) button, press the button to print a demo page. 2.
Media and tray This chapter provides information on how to load print media into your machine. • Using print media that does not meet these specifications may cause problems or require repairs. Such repairs are not covered by Samsung’s warranty or service agreements. • Make sure not to use the inkjet photo paper with this machine. It could cause damage to the machine. 1 Tray overview To change the size, you need to adjust the paper guides. 2 1 • Using inflammable print media can cause a fire.
Media and tray Power voltage Paper quantity indicator shows the amount of paper in the tray. 1 Available paper 110V Letter, Legal, US Folio, Oficio 220V A4 2 1 Full 2 Empty Paper type available for duplex printing Duplex printing might not be available for some models (see "Features by models" on page 6). Depending on the power voltage your machine uses, available paper types for duplex printing differs. Refer to the below table. 2.
Media and tray 2 Loading paper in the tray When printing using the tray, do not load paper on the manual feeder, it may cause a paper jam. 2 1 2 1 2 2.
Media and tray 3 Loading in manual feeder The manual feeder can hold special sizes and types of print material, such as postcards, note cards, and envelopes. Tips on using the manual feeder • Load only one type, size and weight of print media at time in the manual feeder.
Media and tray 2.
Media and tray 4 Printing on special media To see for paper weights for each sheet, refer to "Print media specifications" on page 73. The table below shows the special media usable in each tray. Types Tray Manual feeder To change the paper setting set in the machine, from the Samsung Easy Printer Plain ● ● Manager select Thick ● ● (Switch to advanced mode)> Device Settings.
Media and tray Envelope Printing successfully on envelopes depends upon the quality of the envelopes. To print an envelope, place it as shown in the following figure. - Condition: should not be wrinkled, nicked, nor damaged. - Temperature: should resist the heat and pressure of the machine during operation. • Use only well-constructed envelopes with sharp and well-creased folds. • Do not use stamped envelopes.
Media and tray Transparency • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are being printed out. To avoid damaging the machine, use only transparencies designed for use in laser printers. • Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R 2780 (Letter) Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Must withstand the machine’s fusing temperature.
Media and tray - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams.
Media and tray Preprinted paper 5 Setting the paper size and type When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed. After loading paper in the paper tray, set the paper size and type. To change the paper setting set in the machine, from the Samsung Easy Printer Manager select (Switch to advanced mode)> Device Settings.
Media and tray 6 Using the output support The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do not allow children near it. Open the output support before printing. The printed pages stack on the output support, and the output support will help the printed pages to align. The printer sends printouts to the output tray by default. 2.
Basic printing 7 Printing 4 The basic print settings including the number of copies and print range are selected within the Print window. To take advantage of the advanced printing features, click Properties or Preferences from the Print window (see "Opening printing preferences" on page 38). • If you are a Mac, Linux, or Unix OS user, refer to the "Software installation" on page 95. • For Windows 8 user, see "Basic printing" on page 187.
Basic printing 8 Canceling a print job If the print job is waiting in the print queue or print spooler, cancel the job as follows: • You can access this window by simply double-clicking the machine icon ( • ) in the Windows task bar. You can also cancel the current job by pressing (Cancel) on the control panel. 2.
Basic printing 9 Opening printing preferences The screenshot may differ depending on model. • The Printing Preferences window that appears in this user’s guide may differ depending on the machine in use. However, the composition of the Printing Preferences window is similar. • When you select an option in Printing Preferences, you may see a warning mark or .
Basic printing Using a favorite setting To use a saved setting, select it in the Favorites tab. The machine is now set to print according to the settings you have selected. The Favorites option, which is visible on each preferences tab except for the Samsung tab, allows you to save the current preferences for future use. To delete saved settings, select it in the Favorites tab and click Delete. To save a Favorites item, follow these steps: 1 2 Change the settings as needed on each tab.
Basic printing Eco options • Double-sided printing (long edge) feature is only available for duplex models (see "Variety feature" on page 7). • Depending on the printer driver you use, skip blank pages may not work properly. If skip blank pages feature does not work properly, set the feature from the Easy Eco Driver (see "Easy Eco Driver" on page 177).
3. Maintenance This chapter provides information about purchasing consumables, option and maintenance parts available for your machine.
Ordering consumables and option Available option may differ from country to country. Contact your sales representatives to obtain the list of available consumables, and maintenance parts. To order Samsung-authorized consumables, option, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine. You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service. 3.
Available consumables When consumables reach the end of their life spans, you can order the following types of consumables for your machine: Type Toner cartridge Imaging unit Model Average yielda Part name M2620/ M2820 series Approx. 3,000 pages MLT-D115L M2625/ M2626/ M2825/ M2826 series Approx. 1,200 pages MLT-D116Sb Approx. 3,000 pages MLT-D116L Approx. 9,000 pages MLT-R116 M2625/ M2626/ M2825/ M2826 series a. Declared yield value in accordance with ISO/IEC 19752. b.
Available maintenance parts To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its “Average yield”. Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below.
Storing the toner cartridge Toner cartridges contain components that are sensitive to light, temperature and humidity. Samsung suggests users follow these recommendations to ensure optmal performance, highest quality, and longest life from your new Samsung toner cartridge. Store this cartridge in the same environment in which the printer will be used. This should be in controlled temperature and humidity conditions.
Storing the toner cartridge 3 Estimated cartridge life Estimated cartridge life the life of the toner cartridge (or imaging unit) yield depends on the amount of toner that print jobs require. The actual print yield may vary depending on the print density of the pages you print on, operating environment, percentage of image area, printing interval, media type and/or media size.
Redistributing toner When the toner cartridge is near the end of its life: • White streaks or light printing occurs and/or density variation side to side. • The Toner LED blinks orange. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. • Before opening the front cover, close the output support first.
Redistributing toner 5 M2625/ M2626/ M2825/ M2826 series 2 1 3.
Replacing the toner cartridge • Before opening the front cover, close the output support first. • Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge. • If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Shake the toner cartridge thoroughly, it will increase the initial print quality. • Do not touch the green underside of the toner cartridge.
Replacing the toner cartridge 6 M2620/ M2820 series 3.
Replacing the toner cartridge 7 M2625/ M2626/ M2825/ M2826 series 3.
Replacing the imaging unit 8 M2625/ M2626/ M2825/ M2826 series 2 1 1 2 3.
Cleaning the machine If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing condition and use your machine longer. • Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the cabinet.
Cleaning the machine 10 Cleaning the inside During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears and reduces these problems. • Use a dry lint-free cloth to clean the machine. • If your machine has a power switch, turn the power switch off before cleaning the machine. • Before opening the front cover, close the output support first. 3.
Cleaning the machine Use a dry lint free cloth when cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such as benzene or thinner. Printing quality problems can occur and cause damage to the machine. 1 2 1 2 2 2 1 1 3.
Cleaning the machine 11 Cleaning the pickup roller • Use a dry lint-free cloth to clean the machine. • If your machine has a power switch, turn the power switch off before cleaning the machine. 1 2 2 1 3.
Tips for moving & storing your machine • When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or reduce print quality. • When moving the machine, make sure at least two people are holding the machine securely. 3.
4. Troubleshooting This chapter gives helpful information for what to do if you encounter an error. • Tips for avoiding paper jams 59 • Clearing paper jams 60 • Understanding the LED 68 This chapter gives helpful information for what to do if you encounter an error. If your machine has a display screen, check the message on the display screen first to solve the error. If you cannot find a solution to your problem in this chapter, refer to the Advanced Guide (see "Troubleshooting" on page 194).
Tips for avoiding paper jams By selecting the correct media types, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines: • Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 25). • Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. • Do not remove paper from the tray while your machine is printing. • Flex, fan, and straighten paper before loading.
Clearing paper jams To avoid tearing the paper, pull the jammed paper out slowly and gently. 1 In tray 1 4.
Clearing paper jams 2 In the manual feeder 4.
Clearing paper jams 3 Inside the machine • The fuser area is hot. Take care when removing paper from the machine. • Before opening the front cover, close the output support first. 4.
Clearing paper jams M2620/ M2820 series 1 22 4.
Clearing paper jams M2625/ M2626/ M2825/ M2826 series 1 2 2 1 1 2 4.
Clearing paper jams 4 In the exit area 4.
Clearing paper jams 5 In the duplex area 4.
Clearing paper jams If you do not see the paper in this area, stop and go to next step: 1 2 4.
Understanding the LED The color of the LED indicates the machine's current status. • • • • Some LEDs may not be available depending on model or country (see "Control panel overview" on page 17). To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Troubleshooting" on page 194). You also can resolve the error with the guideline from the computers’ Samsung Printer Status program window (see "Using Samsung Printer Status" on page 184).
Understanding the LED 7 Toner LED/ WPS LED/ Power LED/ Eco LED Status (Toner LED) (WPS LED)b Description Blinking Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page 47). On A toner cartridge has almost reached its estimated cartridge lifea.
5. Appendix This chapter provides product specifications and information concerning applicable regulations.
Specifications 1 General specifications The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information. Items Dimension Width x Length x Height Description 368 x 334.5 x 202 mm (14.49 x 13.17 x 7.95 inches) • M2620 series: 7.0 kg (15.43 lbs) • M2625/ M2626 series: 7.2 kg (15.87 lbs) Weight Machine with consumables • M2625D/ M2626D series: 7.4 kg (16.31 lbs) • M2820 series: 7.2 kg (15.87 lbs) • M2825/ M2826 series: 7.4 kg (16.
Specifications Items Power consumption Description Average operating mode Less than 400 W Ready mode Less than 45 W • M262x/ M262xD/ M262xND: Less than 0.9 W Power save modec • M282xND: Less than 1.0 W • M282xDW: Less than 1.3 W (Wi-Fi Direct on: Less than 1.8 Wf) Wireless f a. b. c. d. e. f. Power off moded Less than 0.2 W (0.1 We) Module SPW-B4319S Sound Pressure Level, ISO 7779. Configuration tested: basic machine installation, A4 paper, simplex printing.
Specifications 2 Print media specifications Print media weight/Capacitya Type Size Dimensions Manual feederb Tray Letter 216 x 279 mm (8.5 x 11 inches) 60 to 163 g/m2 (16 to 43 lbs bond) 60 to 220 g/m2 (16 to 59 lbs bond) Legal 216 x 356 mm (8.5 x 14 inches) • 250 sheets of 80 g/m2 (21 lbs bond) • US Folio 216 x 330 mm (8.5 x 13 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.5 x 13.5 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.
Specifications Print media weight/Capacitya Type Size Dimensions Tray Envelope Monarch 98 x 191 mm (3.87 x 7.5 inches) Envelope No. 10 105 x 241 mm (4.12 x 9.5 inches) Envelope DL 110 x 220 mm (4.33 x 8.66 inches) Envelope C5 162 x 229 mm (6.38 x 9.02 inches) Envelope C6 114 x 162 mm (4.49 x 6.
Specifications Print media weight/Capacitya Type Size Dimensions Tray Card stock Letter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5, Manual feederb Refer to the Plain paper section 121 to 163 g/m2 (32 to 43 lbs bond) 121 to 163 g/m2 (32 to 43 lbs bond) Refer to the Plain paper section 106 to 120 g/m2 (28 to 32 lbs bond) 106 to 120 g/m2 (28 to 32 lbs bond) • Manual feeder: 76 x 127 mm (3 x 5 inches) 60 to 163 g/m2 (16 to 43 lbs bond) d, e Postcard 4x6 Bond paper Refer to the Plain pape
Specifications 3 System requirements Microsoft® Windows® Requirement (recommended) Operating system CPU RAM free HDD space Windows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.
Specifications • Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems. • Users who have administrator rights can install the software. • Windows Terminal Services is compatible with your machine. Mac Requirements (Recommended) Operating system CPU Mac OS X 10.5 • Intel® processors RAM Free HDD space 512 MB (1 GB) 1 GB • 867 MHz or faster Power PC G4/G5 Mac OS X 10.6 • Intel® processors 1 GB (2 GB) 1 GB Mac OS X 10.7 - 10.
Specifications Linux Items Requirements Operating system RedHat® Enterprise Linux WS 4, 5, 6 (32/ 64 bit) Fedora 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 (32/ 64 bit) OpenSuSE® 10.2, 10.3, 11.0, 11.1, 11.2, 11.3, 11.4 (32/ 64 bit) Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64 bit) Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10, 9.04, 9.10, 10.04, 10.10, 11.04 (32/ 64 bit) SuSE Linux Enterprise Desktop 10, 11 (32/ 64 bit) Debian 4.0, 5.0, 6.0 (32/ 64 bit) CPU Pentium IV 2.
Specifications 4 Network environment Network and wireless models only (see "Features by models" on page 6). You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine. Items Network interface Specifications • Ethernet 10/100 Base-TX Wired Lan • 802.
Regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 5 Laser safety statement The printer is certified in the U.S.
Regulatory information 7 9 Power saver China only This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. For more information on the ENERGY STAR program see http:// www.energystar.
Regulatory information The United States of America only 10 Correct disposal of this product (Waste electrical & electronic equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Regulatory information • 12 Consult the dealer or experienced radio TV technician for help. Radio frequency emissions FCC information to the user Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Regulatory information 13 United states of america Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Federal communications commission (FCC) Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it.
Regulatory information 15 18 Germany only Replacing the fitted plug (for UK only) Important 16 Turkey only The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. Contact the people from you purchased the machine.
Regulatory information Important warning: 19 Declaration of conformity (European countries) You must earth this machine. The wires in the mains lead have the following color code: Approvals and Certifications • Green and Yellow: Earth • Blue: Neutral • Brown: Live If the wires in the mains lead do not match the colors marked in your plug, do the following: You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.
Regulatory information EC Certification Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC.
Regulatory information 20 Regulatory compliance statements Wireless guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory information Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.
Regulatory information 22 China only 5.
Copyright © 2013 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
User’s Guide ADVANCED ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC This guide provides information concerning the installation, basic operation and troubleshooting on windows.
ADVANCED 1. Software installation Installation for Mac 96 Reinstallation for Mac 97 Installation for Linux 98 Reinstallation for Linux 99 Setting your machine as a default machine 157 Using advanced print features 158 Using Direct Printing Utility 165 Mac printing 167 Linux printing 169 Unix printing 171 4. Useful management tools 2.
ADVANCED Printing problems 197 Printing quality problems 201 Operating system problems 209 94
1. Software installation This chapter provides instructions for installing essential and helpful software for use in an environment where the machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see Installing driver over the network107).
Installation for Mac 1 Make sure that the machine is connected to your computer and powered on. 10 Select Direct Connection using USB cable on the Printer Connection Type and click Continue. 2 Insert the supplied software CD into your CD-ROM drive. 11 Click Add Printer button to select your printer and add it to your printer list. 12 After the installation is finished, click Close. 3 Double-click the CD-ROM icon that appears on your Mac desktop. • 4 5 6 7 8 For Mac OS X 10.
Reinstallation for Mac If the printer driver does not work properly, uninstall the driver and reinstall it. 1 Open the Applications folder > Samsung > Printer Software Uninstaller. 2 3 4 5 To uninstall printer software, Click Continue. Check the program you want to delete and click Uninstall. Enter the password and click OK. After the uninstallation is finished, click Close. If a machine has already been added, delete it from the Print Setup Utility or Print & Fax. 1.
Installation for Linux You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads). 1 The installation program added the Unified Driver Configurator desktop icon and the Unified Driver group to the system menu for your convenience.
Reinstallation for Linux If the printer driver does not work properly, uninstall the driver and reinstall it. 1 Make sure that the machine is connected to your computer and powered on. 2 When the Administrator Login window appears, type “root” in the Login field and enter the system password. You must log in as a super user (root) to uninstall the printer driver. If you are not a super user, ask your system administrator. 3 Open the Terminal program.
2. Using a networkconnected machine This chapter gives you step-by-step instructions for setting up a network connected machine and software.
Useful network programs There are several programs available to setup the network settings easily in a network environment. For the network administrator especially, managing several machines on the network is possible. Before using the programs below, set the IP address first. 2 SyncThru™ Web Admin Service Web-based machine management solution for network administrators.
Wired network setup You must set up the network protocols on your machine to use it on your network. You can use network after connecting network cable to a corresponding port on your machine. For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program. • See "Using SyncThru™ Web Service" on page 178. • See "Setting IP address" on page 103.
Wired network setup 5 Setting IP address First, you have to set up an IP address for network printing and managements. In most cases a new IP address will be automatically assigned by a DHCP (Dynamic Host Configuration Protocol) server located on the network. 6 Click the icon (third from left) in the SetIP window to open the TCP/IP configuration window. 7 Enter the machine’s new information into the configuration window as follows.
Wired network setup IPv4 configuration using SetIP (Mac) 8 Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. The following instructions may vary from your model. 1 2 3 Connect your machine to the network with a network cable. If you click Customize, you can choose individual components to install. 9 10 Enter the password and click OK. 11 Select Network connection on the Printer Connection Type and click Set IP Address button.
Wired network setup IPv4 configuration using SetIP (Linux) 6 IPv6 configuration Before using the SetIP program, disable the computer firewall from System Preferences or Administrator. IPv6 is supported properly only in Windows Vista or higher. The following instructions may vary from your model or operating systems. 1 2 3 4 Open /opt/Samsung/mfp/share/utils/. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 6 ).
Wired network setup From the SyncThru™ Web Service • You can also set the DHCPv6. • To manually set the IPv6 address: Check the Manual Address check box. Then, the Address/Prefix text box is activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F). Activating IPv6 1 Access a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.
Installing driver over the network • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 6). • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 16). • You can install the printer driver and software when you insert the software CD into your CD-ROM drive. For windows, select the printer driver and software in the Select Software to Install window. 2.
Installing driver over the network Enhanced Features and Participating in Printer Usage Information Collection Program (optional). Then, click Next. 7 Windows 1 Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 103). 2 Insert the supplied software CD into your CD-ROM drive. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.
Installing driver over the network 7 Follow the instructions in the installation window. 1 Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 103). 2 3 From Charms, select Settings > Change PC settings > Devices. For the Start Screen from Windows 8 • Samsung Printer Experience app can only be used in the Start screen when V4 driver is installed.
Installing driver over the network Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. Command- line /s or Definition /p”” or Installs machine drivers without prompting any UIs or user intervention. Specifies printer port. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name.
Installing driver over the network Command- line /x or /X /up”” or /UP”” /d or /D Definition Uses existing machine driver files to create printer instance if it is already installed. Removes only specified printer instance and not the driver files. Uninstalls all device drivers and applications from your system. /v”” or Shares installed machine and add other available /V”” platform drivers for Point & Print.
Installing driver over the network 7 8 Click Agree to agree to the license agreement. Click Install. All components necessary for machine operations will be installed. If you click Customize, you can choose individual components to install. 9 Linux You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads). 9 10 Enter the password and click OK.
Installing driver over the network 10 11 12 Input the printer description and Next. After the machine is added, click Finish. 10 UNIX When installation is done, click Finish. • Make sure your machine supports the UNIX operating system before installing the UNIX printer driver (see "Unix" on page 78). • The commands are marked with “”, when typing the commands, do not type “”.
Installing driver over the network See administration guide of your UNIX OS for details. 4 Unpack the UNIX printer driver package. For example, on IBM AIX, use the following commands. On some UNIX OS, for example on Solaris 10, just added printers may not be enabled and/or may not accept jobs. In this case run the following two commands on the root terminal: “accept ” “enable ” “gzip -d < enter the package name | tar xf -” 5 6 Go to the unpacked directory.
Installing driver over the network Setting up the printer To add the printer to your UNIX system, run ‘installprinter’ from the command line. This will bring up the Add Printer Wizard window. Setup the printer in this window according to the following steps: 1 2 3 Type the name of the printer. 4 5 6 Specify any printer description in the Description field. This is optional. 7 8 9 10 11 12 Check the Make Default option to set this printer as default. Click OK to add the printer.
Wireless network setup • Make sure your machine supports wireless networking. Wireless networking may not be available depending on the model (see "Features by models" on page 6). • If the IPv6 network seems to not be working, set all the network settings to the factory defaults and try again using Clear Setting.
Wireless network setup 12 Introducing wireless set up methods You can set wireless settings either from the machine or the computer. Choose the setting method from the below table. Some wireless network installation types may not be available depending on the model or country. Set up method Connecting method From the computer Description & Reference Windows user, see "Access point via USB cable" on page 123. A B Windows user, see "Access point without a USB cable (recommended)" on page 127.
Wireless network setup Set up method Without Access Point Connecting method From the computer G Description & Reference Windows user, see "Ad hoc via USB cable" on page 129. H Mac user, see "Ad hoc via USB cable" on page 129. Wi-Fi Direct setup See "Setting up Wi-Fi Direct" on page 142. I • If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting" on page 144). • It is strongly recommneded that you set the passwrod on Access Points.
Wireless network setup Choosing your type 13 Using the WPS button There are two methods available to connect your machine to a wireless network If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer. • If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine.
Wireless network setup Machines with a display screen Connecting in PBC mode 1 Press and hold the 2 seconds. (WPS) button on the control panel for more than Connecting in PIN mode 1 Press and hold the 2 seconds. 2 The eight-digit PIN appears on the display. You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router).
Wireless network setup Machines without a display screen Connecting in PBC mode 1 Connecting in PIN mode 1 In ready mode, Press the (Cancel or Stop/Clear) button for more than five seconds on the control panel. Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine without the The machine starts connecting to the wireless network.
Wireless network setup Re-connecting to a network Disconnecting from a network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. To disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds.
Wireless network setup 3 14 Using the menu button Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network.
Wireless network setup • USB cable 3 Insert the supplied software CD into your CD-ROM drive. Creating the infrastructure network 1 2 Check wheter the USB cable is connected to the machine. Turn on your computer, access point, and machine. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
Wireless network setup 5 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 6 If Select the Wireless Setup Method screen appears, select Using a USB cable and click Next. If your computer is wireless network enabled PC running Windows 7 or higher, wireless network installation proceeds automatically. Go to step 10. 7 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next.
Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key.
Wireless network setup 10 11 12 Select the components to be installed. After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the port name of each machine. Click Next. Creating the infrastructure network 1 2 Turn on your computer, access point, and machine. Insert the supplied software CD into your CD-ROM drive. Click Finish.
Wireless network setup 4 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 5 If Select the Wireless Setup Method screen appears, select Using a direct wireless connection and click Next. Even if your computer is running Windows 7 or higher, you cannot use this feature if your PC does not support wireless network. Set the wireless network using a USB cable (see "Access point via USB cable" on page 123). 2.
Wireless network setup Ad hoc via USB cable If below screen appears, press the (WPS) button from the control panel within 2 minutes. If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. Items to prepare 6 7 8 When the wireless network set up is completed, click Next. 9 Click Finish.
Wireless network setup Creating the ad hoc network in Windows 1 2 Turn on your computer and the wireless network machine. Insert the supplied software CD into your CD-ROM drive. If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK. • For Windows 8, If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.
Wireless network setup • Encryption: Select the encryption (None, WEP64, WEP128). • Network Password: Enter the encryption network password value. • Confirm Network Password: Confirm the encryption network password value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index. The wireless network security window appears when the ad hoc network has security enabled. Select Open System or Shared Key for the authentication and click Next.
Wireless network setup The Wireless Network Setting Complete window appears. Click Next. 7 8 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 9 10 Select the components to be installed. 11 Click Finish. 1 Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Mac desktop.
Wireless network setup 10 Select Wireless connection on the Printer Connection Type and click Continue. 11 If Wireless Settings screen appears, select Using a USB cable and click Next. If the screen does not appear, go to step 15. 12 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next. When you set the wireless configuration manually, click Advanced Setting.
Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key.
Wireless network setup 3 Double-click the CD-ROM icon that appears on your Mac desktop. • 4 5 6 7 8 For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. 10 Select Wireless connection on the Printer Connection Type and click Continue. Double-click the MAC_Installer folder > Installer OS X icon. Click Continue. Read the license agreement and click Continue. Click Agree to agree to the license agreement. Click Install. All components necessary for machine operations will be installed.
Wireless network setup 11 If Wireless Settings screen appears, select Using a direct wireless connection and click Next. If below screen appears, press the If the screen does not appear, go to step 13. within 2 minutes. 12 13 (WPS) button from the control panel When the wireless network set up is completed, click Next. After the installation is finished, click Close.
Wireless network setup Items to prepare • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Mac 1 Make sure that the machine is connected to your computer and 6 7 8 Read the license agreement and click Continue. Click Agree to agree to the license agreement. Click Install. All components necessary for machine operations will be installed.
Wireless network setup • Enter the wireless Network Name: Enter the SSID name (SSID is casesensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
Wireless network setup 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next.. • After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 107). If the network cable is connected, it may have trouble finding the machine when configuring the wireless network.
Wireless network setup IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. 1 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable.
Wireless network setup 7 Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network password" on page 116).
Wireless network setup 4 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons. • ID: admin • Password: sec00000 5 When the SyncThru™ Web Service window opens, click Network Settings. 6 Click Wireless > Custom.
Wireless network setup From the USB cable-connected computer(recommended) From the machine (Machines with a display screen) After the driver installation is complete, Samsung Easy Printer Manager can be set and changes in the Wi-Fi Direct can be made. • Select Network > Wireless > Wi-Fi Direct from the control panel. • Enable Wi-Fi Direct. • Samsung Easy Printer Manager is Available for Windows From the machine (Machines without a display screen) and Mac OS users only.
Wireless network setup Setting up the mobile device 20 Troubleshooting • After setting up Wi-Fi Direct from the printer, refer to the user manual of the mobile device you are using to set its Wi-Fi Direct. • After setting up Wi-Fi Direct, you need to download the mobile printing application (For example: Samsung Mobile printer) to print from your smartphone.
Wireless network setup Connecting Failure - General Connection Error • 2 Check the printer port's IP address from your computer. a Click the Windows Start menu. Your computer is not receiving a signal from your machine. Check the USB cable and your machine’s power. • For Windows 8, from the Charms, select Search > Settings. b For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers.
Wireless network setup For example, • Cycle the power for the access point (or wireless router), machine, and computer. Sometimes cycling the power can recover network communication. • Check whether firewall software (V3 or Norton) is blocking the communication. If the computer’s network information is as shown below: ▪ IP address: 169.254.133.42 ▪ Subnet Mask: 255.255.0.0 Then the machine’s network information should be as below: ▪ IP address: 169.254.133.43 ▪ Subnet Mask: 255.255.0.
Wireless network setup • This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless communication types (e.g., Bluetooth) are not supported. • When using the ad hoc mode, in operating systems such as Windows Vista, you might need to set the wireless connection setting every time you use the wireless machine. • You cannot use infrastructure mode and ad hoc mode at the same time for Samsung wireless network machines. • The machine is within the range of the wireless network.
Samsung MobilePrint 21 23 What is Samsung MobilePrint? Samsung MobilePrint is a free application that enables users to print photos, documents, and web pages directly from your smartphone or tablet. Samsung MobilePrint is not only compatible with your Android, Windows and iOS smart phones but also with your iPod Touch and tablet PC. It connects your mobile device to a network connected Samsung printer or to a wireless printer through a Wi-Fi access point.
Google Cloud Print™ Google Cloud Print™ is a service that allows you to print to a printer using your smart phone, tablet, or any other web-connected devices. Just register your Google account with the printer, and you are ready to use the Google Cloud Print™ service. You can print your document or email with Chrome OS, Chrome browser, or a Gmail™/ Google Docs™ application on your mobile device, so you 5 Click Login in the upper right corner of the SyncThru™ Web Service website.
Google Cloud Print™ 10 11 Click Finish printer registration. Click Manage your printers. 26 Printing with Google Cloud Print™ Now your printer is registered with Google Cloud Print™ service. The printing procedure varies depending on the application or the device you Google Cloud Print™-ready devices will appear in the list. are using. You can see the application list that supports Google Cloud Print™ service.
Google Cloud Print™ 6 7 Set the printing options if you want. Tap Click here to Print. Printing from the Chrome browser The following steps are an example of using the Chrome browser. 1 2 3 4 5 6 Run Chrome. Open the document or email that you want to print. Click the wrench icon in the browser’s top right corner. Click Print. A new tab for printing appears. Select Print with Google Cloud Print. Click the Print button. 2.
AirPrint 4 Only AirPrint certified machines can use the AirPrint feature. Check the box your machine came in for the AirPrint certified mark. AirPrint allows you to wirelessly print directly from iPhone, iPad and iPod touch running the latest version of iOS. Type in the ID and Password, then click Login. Type in the below default ID and password. We recommend you to change the default password for security reasons.
AirPrint Cancelling print job: To cancel the printing job or view the print summary, click the print center icon ( ) in multitasking area. You can click cancel in the print center. 2.
3. Special features This chapter explains special printing features. • Altitude adjustment 155 • Changing the default print settings 156 • Setting your machine as a default machine 157 • Using advanced print features 158 • Using Direct Printing Utility 165 • Mac printing 167 • Linux printing 169 • Unix printing 171 The procedures in this chapter are mainly based on Windows 7.
Altitude adjustment Print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for the best print quality. Before you set the altitude value, determine the altitude where you are.
Changing the default print settings 1 Click the Windows Start menu. • 2 3 4 For Windows 8, from the Charms, select Search > Settings. If you want to change the settings for each print job, change it in Printing Preferences. For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.
Setting your machine as a default machine 1 Click the Windows Start menu. • 2 3 4 For Windows 8, from the Charms, select Search > Settings. For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. • For Windows 7/ Windows 8, select Control Panel > Devices and Printers. Select your machine.
Using advanced print features 2 3 • XPS printer driver: used to print XPS file format. - The XPS printer driver can be installed only on Windows Vista OS or higher. Click Print. Type in the destination path and the file name, and then click OK. For example, c:\Temp\file name. - Install optional memory when an XPS job does not print because the printer is out of memory. - For models that provide XPS driver from the Samsung website, http:/ /www.samsung.com > find your product> Support or downloads.
Using advanced print features Item Multiple Pages per Side Poster Printing Description Selects the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet. Prints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets together to form one poster-size document.
Using advanced print features Item • Double-sided Printing Description Print on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented. • Double-sided Printing (Manual)a • You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper • If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of the document first. After that, a message appears on your computer.
Using advanced print features Item Description Paper Options Changes the size of a document to appear larger or smaller on the printed page by entering in a percentage by which to enlarge or decrease the document. Watermark The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document.
Using advanced print features Item Description This option is available only when you use the PCL printer driver. Overlaya An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing exactly the same information that is currently on your letterhead.
Using advanced print features Item Overlay (Using a page overlay) Overlay (Deleting a page overlay) Description a Click the Advanced tab. b Select the desired overlay from the Text drop-down list. c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window.
Using advanced print features Item Description • This feature is available only if you have installed the optional hard disk or set the Ram Disk. To set the Ram Disk, you must enable it from SyncThru™ Web Service> Settings > Machine Settings > Ram Disk. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. • You can see the print job list you set in the printer driver's Print Mode in the Job Management menu using the control panel.
Using Direct Printing Utility 4 • Direct Printing Utility may not be available depending on model or optional goods (see "Software" on page 6). • Available for Windows OS users only. Printing There are several ways you can print using the Direct Printing Utility. 1 3 • What is Direct Printing Utility? Direct Printing Utility is a program that sends the PDF files directly to your machine to print without having to opening the file.
Using Direct Printing Utility 5 Using the right-click menu 1 Right-click on the PDF file to print and select Direct Printing. The Direct Printing Utility window appears with the PDF file is added. 2 3 4 Select the machine to use. Customize the machine settings. Click Print. The selected PDF file is sent to the machine. 3.
Mac printing 7 Changing printer settings Some features may not be available depending on models or options. It means that the features are not supported. You can use advanced printing features when using your machine. 6 Printing a document When you print with a Mac, you need to check the printer driver settings in each application you use. Follow the steps below to print from a Mac: Open an application and select Print from the File menu.
Mac printing 9 If you print more than 2 copies, the first copy and the second copy might print on the same sheet of paper. Avoid printing on both sides of paper when you are printing more than 1 copy. Printing on both sides of the paper Some features may not be available depending on models or options. It means that the features are not supported (see "Variety feature" on page 7). 10 Using help Before printing in the duplex mode, decide on which edge you will be binding your finished document.
Linux printing 8 Some features may not be available depending on models or options. It means that the features are not supported. Click Print. Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lp or lpr printing system or other applications for odd-even printing. 11 Printing from applications 12 There are a lot of Linux applications that allow you to print using Common UNIX Printing System (CUPS).
Linux printing • 13 Configuring Printer Properties Using the Printer Properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. 1 4 Classes: Shows the class that your machine is in. Click Add to Class to add your machine to a specific class or click Remove from Class to remove the machine from the selected class. Click OK to apply the changes and close the Printer Properties window. Open the Unified Driver Configurator.
Unix printing Some features may not be available depending on models or options. It means that the features are not supported (see "Features by models" on page 6). To take advantage of the printer features provided by your printer driver, press Properties. 5 Press OK to start the print job. 14 Proceeding the print job 15 Changing the machine settings After installing the printer, choose any of the image, text, or PS files to print. 1 Execute “printui ” command.
Unix printing Printer-Specific Settings tab Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lpr printing system or other applications for odd-even printing. • Multiple pages: Print several pages on one side of the paper. • Page Border: Choose any of the border styles (e.g., Single-line hairline, Double-line hairline) Select various options in the JCL and General frames to customize various settings.
4. Useful management tools This chapter introduces management tools provided to help you make full use of your machine.
Accessing management tools Samsung provides a variety of management tools for Samsung printers. 1 Make sure that the machine is connected to your computer and powered on. 2 From the Start menu, select Programs or All Programs. • 3 4 5 For Windows 8, from Charms, select Search > Apps. Find Samsung Printers. Under Samsung Printers, you can see installed management tools. Click the management tool you want to use.
Easy Capture Manager • Available for Windows OS users only. • This feature may not be available depending on model or optional goods. This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. 4.
Samsung AnyWeb Print • Available for Windows OS users only. • This feature may not be available depending on model or optional goods . This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or Downloads). 4.
Easy Eco Driver • This feature may not be available depending on model or optional goods. • Available for Windows OS users only. With the Easy Eco Driver, you can apply Eco features to save paper and toner before printing. To use this application, Start Easy Eco Driver before printing job checkbox in the printer properties should be checked. Easy Eco Driver also allows you simple editing such as removing images and texts, changing fonts, and more. You can save frequently used settings as a preset.
Using SyncThru™ Web Service 1 2 • Internet Explorer 6.0 or higher is the minimum requirement for SyncThru™ Web Service. • SyncThru™ Web Service explanation in this user’s guide may differ from your machine depending on its options or models. • Network model only. Click Login on the upper right of the SyncThru™ Web Service website. Type in the ID and Password then click Login.
Using SyncThru™ Web Service • Usage Counters: Shows the usage count by print types: simplex and duplex. Maintenance tab • Current Settings: Shows the machine’s and network’s information. • Print information: Prints reports such as system related reports and font reports. This tab allows you to maintain your machine by upgrading firmware and setting contact information for sending emails. You can also connect to Samsung website or download drivers by selecting the Link menu.
Using SyncThru™ Web Service 3 Setting the system administrator’s information This setting is necessary for using the e-mail notification option. 1 Start a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2 3 4 Your machine’s embedded website opens. 5 Click Apply.
Using Samsung Easy Printer Manager • This feature may not be available depending on model or optional goods (see "Software" on page 6). • Available for Windows and Mac OS users only (see "Software" on page 6). • For Windows, Internet Explorer 6.0 or higher is the minimum requirement for Samsung Easy Printer Manager. Open the Applications folder > Samsung folder > Samsung Easy Printer Manager.
Using Samsung Easy Printer Manager Printer list The Printer List displays printers installed on your computer and network printers added by network discovery (Windows only). Printer information This area gives you general information about your machine. You can check information, such as the machine’s model name, IP address (or Port name), and machine status. 1 2 You can view the online User’s Guide. Troubleshooting button: This button opens the Troubleshooting Guide when an error occurs.
Using Samsung Easy Printer Manager 5 Advanced settings user interface overview The advanced user interface is intended to be used by the person responsible for managing the network and machines. Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. Device Settings You can configure various machine settings such as machine setup, paper, layout, emulation, network, and print information.
Using Samsung Printer Status The Samsung Printer Status is a program that monitors and informs you of the machine status. Icon • The Samsung Printer Status window and its contents shown in this user’s guide may differ depending on the machine or operating system in use. Mean Description Normal The machine is in ready mode and experiencing no errors or warnings. Warning The machine is in a state where an error might occur in the future.
Using Samsung Printer Status 3 Order Supplies You can order replacement toner cartridge(s) from online. User’s Guide You can view the online User’s Guide. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. 4 5 Close Close the window. 4.
Using Samsung Printer Experience Available for Windows 8 users only. The screenshot may differ depending on the model you are using. Samsung Printer Experience is a Samsung application that combines Samsung machine settings and machine management into one location. You can set device settings, order supplies, open troubleshooting guides, visit Samsung’s web site, and check connected machine information.
Using Samsung Printer Experience 8 2 User Guide You can view the online User’s Guide. You need to be connected to the Internet to use this feature. Printing from Windows 8 This section explains common printing tasks from the Start screen. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. 3 4 Order Supplies Visit Samsung Links to Samsung printer website.
Using Samsung Printer Experience 5 Opening more settings Click the Print button to start the print job. The screen may appear somewhat different depending on the model or options. You can set up more printing parameters. 1 2 3 4 Open the document you want to print. From the Charms, select Devices. Select your printer from the list Click More settings.
Using Samsung Printer Experience Basic tab Advanced tab Basic Paper settings This option allows you to choose the basic printing settings such as copies, orientation, and document type. This option allows you to set the basic paper handling specifications. Eco settings This option allows you to set the various ways to layout your documents. Layout settings This option allows you to choose multiple pages per side to save media. 4.
Using Samsung Printer Experience Security tab This option is used for printing confidential documents. You need to enter a password to print using it. Some features may not be available depending on the model or options. If this tab is not shown or disabled, it means that this features are not supported. Job Accounting This option allows you to print with the given permission. Confidential Printing 4.
Using the Linux Unified Driver Configurator The Unified Driver Configurator is a tool primarily intended for configuring machine devices. You need to install Unified Linux Driver to use Unified Driver Configurator (see "Installation for Linux" on page 98). After the driver is installed on your Linux system, the Unified Driver Configurator icon will automatically be created on your desktop. 9 Opening Unified Driver Configurator 1 Double-click the Unified Driver Configurator on the desktop.
Using the Linux Unified Driver Configurator The printer control buttons are, as follows: 10 Printers configuration Printers configuration has the two tabs: Printers and Classes. Printers tab View the current system’s printer configuration by clicking on the machine icon button on the left side of the Unified Driver Configurator window. 1 Switches to Printers configuration. 2 Shows all of the installed machines. 3 Shows the status, model name, and URI of your machine.
Using the Linux Unified Driver Configurator Classes tab 11 Ports configuration The Classes tab shows a list of available machine classes. 1 In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in a busy state when its owner has terminated the job for any reason. 2 1 2 1 Shows all of the machine classes. 2 Shows the status of the class and the number of machines in the class. 3 • Refresh: Renews the classes list.
5. Troubleshooting This chapter gives helpful information for what to do if you encounter an error.
Paper feeding problems Condition Suggested solutions Paper jams during printing. Clear the paper jam. Paper sticks together. • Check the maximum paper capacity of the tray . • Make sure that you are using the correct type of paper. • Remove paper from the tray and flex or fan the paper. • Humid conditions may cause some paper to stick together. Multiple sheets of paper do not feed. Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
Power and cable connecting problems Condition Suggested solutions The machine is not receiving power, or the connection cable between the computer and the machine is not connected properly. • Connect the machine to the electricity supply first and press the (Power) button on the control panel. • Disconnect the machine’s cable and reconnect it. 5.
Printing problems Condition The machine does not print. Possible cause Suggested solutions The machine is not receiving power. Check the power cord connections. Check the power switch and the power source. The machine is not selected as the default machine. Select your machine as your default machine in Windows. Check the machine for the following: • The front cover is not closed. Close the front cover. • Paper is jammed. Clear the paper jam. • No paper is loaded. Load paper.
Printing problems Condition The machine does not print. Possible cause Suggested solutions The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver. The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative. The document size is so big that the hard disk space of the computer is insufficient to access the print job.
Printing problems Condition The machine prints, but the text is wrong, garbled, or incomplete. Pages print, but they are blank. Possible cause Suggested solutions The machine cable is loose or defective. Disconnect the machine cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer that you know works and try a print job. Finally, try a new machine cable. The wrong printer driver was selected.
Printing problems Condition Possible cause Suggested solutions Before printing, the machine emits vapor near the output tray. Using damp paper can cause vapor during printing. This is not a problem. Just keep printing. The machine does not print special-sized paper, such as billing paper. Paper size and paper size setting do not match. Set the correct paper size in the Custom in Paper tab in Printing Preferences. The printed billing paper is curled. The paper type setting does not match.
Printing quality problems If the inside of the machine is dirty or paper has been loaded improperly, there might be a reduction in print quality. See the table below to clear the problem. Condition Light or faded print Suggested Solutions • If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge. • The paper may not meet paper specifications; for example, the paper may be too moist or rough.
Printing quality problems Condition Dropouts Suggested Solutions If faded areas, generally rounded, occur randomly on the page: • A single sheet of paper may be defective. Try reprinting the job. A aBb C A aBb C A aBb C A aBb C A aBb C White Spots • The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. • The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
Printing quality problems Condition Black background Suggested Solutions If the amount of background shading becomes unacceptable: • Change to a lighter weight paper. • Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount of background shading. • Remove the old toner cartridge and install a new one. • Thoroughly redistribute the toner (see "Redistributing toner" on page 47). Toner smear • Clean the inside of the machine.
Printing quality problems Condition Background scatter A Suggested Solutions Background scatter results from bits of toner randomly distributed on the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. • If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side.
Printing quality problems Condition Page skew Suggested Solutions • Ensure that the paper is loaded properly. • Check the paper type and quality. • Ensure that the guides are not too tight or too loose against the paper stack. Curl or wave • Ensure that the paper is loaded properly. • Check the paper type and quality. Both high temperature and humidity can cause paper curl. • Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Printing quality problems Condition Suggested Solutions Back of printouts are dirty • Check for leaking toner. Clean the inside of the machine. Solid color or black pages • The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. • The toner cartridge may be defective. Remove the toner cartridge and install a new one. A Loose toner • The machine may require repairing. Contact a service representative. • Clean the inside of the machine.
Printing quality problems Condition Character voids A Horizontal stripes Suggested Solutions Character voids are white areas within parts of characters that should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. • You may be printing on the wrong surface of the paper. Remove the paper and turn it around. • The paper may not meet paper specifications.
Printing quality problems Condition Suggested Solutions • An unknown image Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above. repetitively appears on a few The high altitude may affect the print quality, such as loose toner or light imaging. Change the altitude setting for your machine (See sheets "Altitude adjustment" on page 155). • Loose toner • Light print or contamination occurs 5.
Operating system problems 1 Common Windows problems Condition Suggested solutions “File in Use” message appears during installation. Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall the printer driver. “General Protection Fault”, “Exception OE”, “Spool 32”, or “Illegal Operation” messages appear. Close all other applications, reboot Windows and try printing again. “Fail To Print”, “A printer timeout error occurred” message appear.
Operating system problems Refer to the Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages. 2 Common Mac problems Condition The machine does not print PDF files correctly. Some parts of graphics, text, or illustrations are missing. Suggested solutions Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options. It will take longer to print when you print a PDF file as an image.
Operating system problems 3 Common Linux problems Condition The machine does not print. Suggested solutions • Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in the Printers configuration window to look at the list of available machines. Make sure that your machine is displayed on the list. If not, open Add new printer wizard to set up your device. • Check if the machine is started.
Contact SAMSUNG worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country/Region BOTSWANA Country/Region Customer Care Center WebSite BRAZIL Customer Care Center WebSite 0800-726-000 www.samsung.com 0800-124-421 www.samsung.com 4004-0000 ANGOLA 91-726-7864 www.samsung.com ARGENTINA 0800-333-3733 www.samsung.com BULGARIA 07001 33 11 , normal tariff www.samsung.com ARMENIA 0-800-05-555 www.samsung.
Contact SAMSUNG worldwide Country/Region Customer Care Center 8009 4000 only from landline CYPRUS WebSite www.samsung.com Country/Region FRANCE (+30) 210 6897691 from mobile and land line CZECH 800-SAMSUNG (800-726786) www.samsung.com DENMARK 70 70 19 70 www.samsung.com 1-800-751-2676 www.samsung.com/ latin (Spanish) DOMINICA www.samsung.com/ latin_en (English) 1-800-10-7267 ECUADOR www.samsung.com/ latin (Spanish) 08000-726786 www.samsung.com EIRE 0818 717100 www.samsung.
Contact SAMSUNG worldwide Country/Region Customer Care Center (852) 3698-4698 HONG KONG HUNGARY INDIA INDONESIA WebSite www.samsung.com/hk (Chinese) www.samsung.com/ hk_en (English) Country/Region Customer Care Center 183-2255 (183-CALL) WebSite www.samsung.com/ae (English) KUWAIT www.samsung.com/ ae_ar (Arabic) 06-80-SAMSUNG (726-7864) www.samsung.com KYRGYZSTAN 00-800-500-55-500 www.samsung.com 1800 3000 8282 www.samsung.com/in LATVIA 8000-7267 www.samsung.
Contact SAMSUNG worldwide Country/Region Customer Care Center 00-1800-5077267 NICARAGUA NORWAY WebSite Country/Region Customer Care Center www.samsung.com/ latin (Spanish) 1-800-10-SAMSUNG(726-7864) for PLDT www.samsung.com/ latin_en (English) 1-800-3-SAMSUNG(726-7864) for Digitel PHILIPPINES 815-56 480 www.samsung.com 1-800-8-SAMSUNG(726-7864) for Globe 800-SAMSUNG (726-7864) www.samsung.com/ae (English) 02-5805777 OMAN 0 801-1SAMSUNG(172-678) * www.samsung.
Contact SAMSUNG worldwide Country/Region RUSSIA SAUDI ARABIA SENEGAL SERBIA Customer Care Center WebSite 800-00-0077 www.samsung.com TANZANIA 9200-21230 www.samsung.com/sa (Arabic) THAILAND 8-800-555-55-55 www.samsung.com +381 11 321 6899 www.samsung.com (old number still active 0700 7267864) SINGAPORE 1800-SAMSUNG (726-7864) www.samsung.com SLOVAKIA 0800 - SAMSUNG(0800-726 786) www.samsung.com SOUTH AFRICA 0860 SAMSUNG (726-7864) www.samsung.
Glossary ADF The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. 802.11 802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802). 802.11b/g/n 802.11b/g/n can share same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150 Mbps. 802.
Glossary BOOTP Coverage Bootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assign the IP address from a pool of addresses to each client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system. It is the printing term used for a toner usage measurement on printing.
Glossary DHCP DPI A Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts. Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and printing.
Glossary ECM EtherTalk Error Correction Mode (ECM) is an optional transmission mode built into Class 1 fax machines or fax modems. It automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise. A suite of protocols developed by Apple Computer for computer networking. It was included in the original Mac (1984) and is now deprecated by Apple in favor of TCP/IP networking.
Glossary Gateway IEEE A connection between computer networks, or between a computer network and a telephone line. It is very popular, as it is a computer or a network that allows access to another computer or network. The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity.
Glossary IPM ITU-T The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute. The International Telecommunication Union is an international organization established to standardize and regulate international radio and telecommunications.
Glossary LDAP MH The Lightweight Directory Access Protocol (LDAP) is a networking protocol for querying and modifying directory services running over TCP/IP. Modified Huffman (MH) is a compression method for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image recommended by ITU-T T.4. MH is a codebook-based run-length encoding scheme optimized to efficiently compress white space.
Glossary NetWare OSI A network operating system developed by Novell, Inc. It initially used cooperative multitasking to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack. Today NetWare supports TCP/IP as well as IPX/SPX. Open Systems Interconnection (OSI) is a model developed by the International Organization for Standardization (ISO) for communications.
Glossary PostScript Protocol PostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. - that is run in an interpreter to generate an image. A convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. PS Printer Driver See PostScript. A program used to send commands and transfer data from the computer to the printer.
Glossary SMB TCP/IP Server Message Block (SMB) is a network protocol mainly applied to share files, printers, serial ports, and miscellaneous communications between nodes on a network. It also provides an authenticated Inter-process communication mechanism. The Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of communications protocols that implement the protocol stack on which the Internet and most commercial networks run.
Glossary TWAIN Watermark An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. It is an image capture API for Microsoft Windows and Apple Mac operating systems. A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light.
Glossary WPA-PSK WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or home users. A shared key, or password, is configured in the wireless access point (WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique key for each session between a wireless client and the associated WAP for more advanced security. WPS The Wi-Fi Protected Setup (WPS) is a standard for establishing a wireless home network.
Index A F accessing favorites settings, for printing management tools 174 AirPrint 152 AnyWeb Print 176 99 39 features print media feature front view 4 G cleaning general icons 16 glossary 217 outside 53 google cloud printing 149 pickup roller 56 cleaning a machine 53 J control panel 17 jam direct printing utility 165 Unix 113 eco button 17 eco printing 39 191 using SetIP 105 special media driver installation 20 driver reinstalling 22 M tips for avoiding paper
Index using SetIP 104 maintenance parts 44 manual feeder/multi-purpose tray tips on using 28 using special media 30 delete 163 Linux 169 print 163 Mac 167 multiple pages on one sheet of paper 167 Mac P placing a machine 155 printing a document Windows mobile OS 148 printing on both sides of paper Mac 168 mobileprint 148 printing to a file 158 UNIX 171 using direct printing utility 165 adjusting the altitude N print network driver installation Linux Mac UNIX Windows 112 111
Index S safety information 10 symbols 10 samsung printer experience 186 Samsung Printer Status 184 service contact numbers 212 SetIP program special print features 154 71 print media 73 stop button 18 handling instructions 45 non-Samsung and refilled 45 redistributing toner 47 replacing the cartridge 49 storing 45 43 Windows common Windows problems system requirements U using SetIP 68 UNIX 171 Unix system requirements 78 USB cable toner cartridge 161 209 driver installa
Index wireless network network cable 139 Index 232