User’s Guide BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on Windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries.
BASIC 1.
1. Introduction This chapter provides information you need to know before using the machine.
Key benefits Environmentally friendly - M282x series/M283x series ▪ For single-side printing, up to 28 ppm (A4) or up to 29 ppm (Letter). Convenience • To save toner and paper, this machine supports the Eco feature. • To save paper, you can print multiple pages on a single sheet of paper (see "Using advanced print features" on page 161). • To save paper, you can print on both sides of the paper (double-sided printing) (see "Using advanced print features" on page 161).
Key benefits • If you have Internet access, you can get help, support application, machine drivers, manuals, and order information from the Samsung website, www.samsung.com > find your product > Support or Downloads. Supports various wireless network setting method Wide range of functionality and application support • Using the WPS (Wi-Fi Protected Setup™) button - You can easily connect to a wireless network using the WPS button on the machine and the access point (a wireless router).
Features by model Some features and optional goods may not be available depending on model or country. You can install the printer driver and software when you insert the software CD into your CD-ROM drive. Operating System M262x series M282x series M283x series Windows ● ● Mac ● ● Linux ● ● Operating System Software Unix (●: Included, Blank: Not available) For Windows, select the printer driver and software in the Select Software to Install window.
Features by model Software SyncThru Admin Web Service M262x series ● M282x series M283x series Features M262x series ● ● (M262xND only) IPv6 (M262xND only) Easy Eco Driver ● ● Easy Capture Manager ● ● a. Depending on the operating system you use, the installed printer driver may differ. b. Download the software from the Samsung website and install it: (http:// www.samsung.com > find your product > Support or Downloads). Before installing, check whether your computer’s OS support the software.
Useful to know The machine does not print. A paper jam has occurred. • Open the print queue list and remove the document from the list (see "Canceling a print job" on page 39). • Open and close the front door. • Remove the driver and install it again (see "Installing the driver locally" on page 21). • Check the instructions on removing jammed paper in this manual and troubleshoot accordingly (see "Clearing paper jams" on page 60). • Select your machine as your default machine in your Windows.
About this user’s guide This user's guide provides information for your basic understanding of the machine as well as detailed steps to explain machine usage. • Do not discard this manual, and keep it for future reference. • Read the safety information before using the machine. • If you have a problem using the machine, refer to the troubleshooting chapter.
Safety information These warnings and precautions are included to prevent injury to you and others, and to prevent any potential damage to your machine. Be sure to read and understand all of these instructions before using the machine. After reading this section, keep it in a safe place for future reference. 4 Operating environment Warning 3 Important safety symbols Do not use if the power cord is damaged or if the electrical outlet is not grounded.
Safety information 5 Caution During an electrical storm or for a period of non-operation, remove the power plug from the electrical outlet. Operating method Caution This could result in electric shock or fire. Be careful, the paper output area is hot. Do not forcefully pull the paper out during printing. Burns could occur. It can cause damage to the machine.
Safety information Do not block or push objects into the ventilation opening. Caution This could result in elevated component temperatures which can cause damage or fire. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This machine's power reception device is the power cord. To switch off the power supply, remove the power cord from the electrical outlet.
Safety information 7 Do not place the machine on an unstable surface. The machine could fall, causing injury or machine damage. Maintenance / Checking Use only No.26 AWGa or larger, telephone line cord, if necessary. Otherwise, it can cause damage to the machine. Make sure you plug the power cord into a grounded electrical outlet. Otherwise, this could result in electric shock or fire. Use the power cord supplied with your machine for safe operation.
Safety information Keep the power cable and the contact surface of the plug clean from dust or water. When storing consumables such as toner cartridges, keep them away from children. Otherwise, this could result in electric shock or fire. Toner dust can be dangerous if inhaled or ingested. • Do not remove any covers or guards that are fastened with screws. Using recycled consumables, such as toner, can cause damage to the machine.
Machine overview 9 Components The actual component may differ from the illustration below. Some components may change depending on the circumstances. Machine Power cord Quick installation guide Misc. accessoriesb Software CDa a. The software CD contains the printer drivers, user’s guide, and software applications. b. Miscellaneous accessories included with your machine may vary by country of purchase and specific model. 1.
Machine overview 10 5 Front view Tray 1 6 11 Imaging unitb 12 NFC (Near Field Communication) tag c • This illustration may differ from your machine depending on its model. • Some features and optional goods may not be available depending on model or country. Manual feeder 12 1 7 9 a. M2620/M2820/M2830 series only. b. M2625/M2626/M2825/M2826/M2835/M2836 series only. c. M283x series only.
Machine overview 11 Rear view • This illustration may differ from your machine depending on its model. • Some features and optional goods may not be available depending on model or country. 1 2 3 4 5 1 Network porta 4 Power receptacle 2 USB port 5 Rear cover 3 Power-switchb a. Network and wireless models only (see "Features by model" on page 6). b. Only if the machine has a power switch. 1.
Control panel overview This control panel may differ from your machine depending on its model. There are various types of control panels. 3 Info sheeta Prints a demo page and network configuration report (see "Printing a demo page" on page 25). WPSb Configures the wireless network connection easily without a computer (see "Wireless network setup" on page 118). Print screenc Press this button and the green LED will start blinking.
Control panel overview 4 Cancel Stops an operation at any time and there are more functions. • Cancels the current job. • Prints demo page: Press and hold this button for about 2 seconds until the status LED blinks slowly, and release. • Supplies Info & Usage Counter: Press and hold this button for about 6 seconds and release. • Prints configuration reports/network configuration reportsd: Press and hold this button for about 4 seconds until the status LED blinks fast, and release. a. b. c. d.
Turning on the machine 1 Connect the machine to the electricity supply first. Press the power key or turn the switch on if the machine has a power switch. 2 1 2 Press (Power) on the control panel. 1.
Installing the driver locally If the installation window does not appear, click Start > All programs > Accessories > Run. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 109). X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
Installing the driver locally From the Windows 8 Start Screen • The V4 driver is automatically downloaded from the Windows Update if your computer is connected to the Internet. If not, you can manually download the V4 driver from Samsung website, www.samsung.com > find your product > Support or downloads. • You can download Samsung Printer Experience app from the Windows Store. You need have a Microsoft account to use the Windows Store. 1 From Charms, select Search. 2 Click Store.
Reinstalling the driver If the printer driver does not work properly, follow the steps below to reinstall the driver. From the Windows 8 Start Screen 13 Windows 1 Make sure that the machine is connected to your computer and powered on. 1 Make sure that the machine is connected to your computer and powered on. 2 Click on the Uninstall Samsung Printer Software tile in the Start screen. 2 From the Start menu, select Programs or All Programs > Samsung Printers > Uninstall Samsung Printer Software.
2. Basic Setup After installation is complete, you may want to set the machine’s default settings. Refer to the next section if you would like to set or change values.
Printing a demo page Print a demo page to make sure that the machine is operating correctly. To print a demo page: In ready mode, press and hold (Cancel) button for about 2 seconds until the status LED blinks, and release. For a model with an Info sheet ( ) button, press the button to print a demo page. 2.
Media and tray This chapter provides information on how to load print media into your machine. 1 • Brightness: Some print media are whiter than others and produce sharper, more vibrant images. • Surface smoothness: The smoothness of the print media affects how crisp the printing looks on the paper. Selecting print media You can print on a variety of print media, such as plain paper, envelopes, labels, and transparencies. Always use print media that meet the guidelines for use with your machine.
Media and tray The amount of paper put into the tray may differ according to media type used (see "Print media specifications" on page 74). Paper quantity indicator shows the amount of paper in the tray. 2 Tray overview To change the size, you need to adjust the paper guides. 2 1 3 1 Tray extension guide 2 Paper length guide 3 Paper width guide 1 2 1 Full 2 Empty If you do not adjust the guide, it may cause paper registration, image skew, or jamming of the paper. 2.
Media and tray Paper type available for duplex printing Duplex printing might not be available for some models (see "Features by model" on page 6). Depending on the power voltage your machine uses, available paper types for duplex printing differs. Refer to the below table. Power voltage Available paper 110V Letter, Legal, US Folio, Oficio 220V A4 2.
Media and tray 3 Loading paper in the tray When printing using the tray, do not load paper on the manual feeder, it may cause a paper jam. 2 1 2 1 2 2.
Media and tray 4 Loading in manual feeder The manual feeder can hold special sizes and types of print material, such as postcards, note cards, and envelopes. Tips on using the manual feeder • Load only one type, size and weight of print media at time in the manual feeder.
Media and tray 5 Printing on special media To see for paper weights for each sheet, refer to "Print media specifications" on page 74. The table below shows the special media usable in each tray. The paper setting in the machine and driver should match to print without a paper mismatch error. To change the paper setting set in the machine, from the Samsung Easy Printer Manager select (Switch to advanced mode)> Device Settings.
Media and tray Envelope Printing successfully on envelopes depends upon the quality of the envelopes. To print an envelope, place it as shown in the following figure. - Condition: should not be wrinkled, nicked, nor damaged. - Temperature: should resist the heat and pressure of the machine during operation. • Use only well-constructed envelopes with sharp and well-creased folds. • Do not use stamped envelopes.
Media and tray Transparency • To prevent transparencies from sticking to each other, do not let the printed sheets stack up as they are being printed out. To avoid damaging the machine, use only transparencies designed for use in laser printers. • Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R 2780 (Letter) Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Must withstand the machine’s fusing temperature.
Media and tray - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams.
Media and tray Preprinted paper 6 Setting the paper size and type When loading preprinted paper, the printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feeding, turn the paper around. Note that print quality is not guaranteed. After loading paper in the paper tray, set the paper size and type. The paper setting in the machine and driver should match to print without a paper mismatch error.
Media and tray 7 Using the output support The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you do not allow children near it. Open the output support before printing. The printed pages stack on the output support, and the output support will help the printed pages to align. The printer sends printouts to the output tray by default. 2.
Basic printing 8 Printing 4 The basic print settings including the number of copies and print range are selected within the Print window. To take advantage of the advanced printing features, click Properties or Preferences from the Print window (see "Opening printing preferences" on page 40). • If you are a Mac, Linux, or Unix OS user, refer to the "Software Installation" on page 97. • For Windows 8 user, see "Basic printing" on page 193.
Basic printing 9 Canceling a print job If the print job is waiting in the print queue or print spooler, cancel the job as follows: • You can access this window by simply double-clicking the machine icon ( • ) in the Windows task bar. You can also cancel the current job by pressing (Cancel) on the control panel. 2.
Basic printing 10 Opening printing preferences The screenshot may differ depending on model. • The Printing Preferences window that appears in this user’s guide may differ depending on the machine in use. However, the composition of the Printing Preferences window is similar. • When you select an option in Printing Preferences, you may see a warning mark or .
Basic printing Using a favorite setting To use a saved setting, select it in the Favorites tab. The machine is now set to print according to the settings you have selected. The Favorites option, which is visible on each preferences tab except for the Favorites and Samsung tab, allows you to save the current preferences for future use. To delete saved settings, select it in the Favorites tab and click Delete.
Basic printing Eco options • Double-sided printing (long edge) feature is only available for duplex models (see "Variety feature" on page 7). • Depending on the printer driver you use, skip blank pages may not work properly. If skip blank pages feature does not work properly, set the feature from the Easy Eco Driver (see "Easy Eco Driver" on page 182).
3. Maintenance This chapter provides information about purchasing consumables, option and maintenance parts available for your machine.
Ordering consumables and option Available option may differ from country to country. Contact your sales representatives to obtain the list of available consumables, and maintenance parts. To order Samsung-authorized consumables, option, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine. You can also visit www.samsung.com/supplies, and then select your country/region to obtain the contact information for service. 3.
Available consumables When consumables reach the end of their life spans, you can order the following types of consumables for your machine: Type Toner cartridge Imaging unit Model Average yielda Part name M2620/M2621/M2820/M2830 series Approx. 3,000 pages MLT-D115L M2625/M2626/M2825/M2826/M2835/M2836 series Approx. 1,200 pages MLT-D116S Approx. 3,000 pages MLT-D116L Approx. 9,000 pages MLT-R116 M2625/M2626/M2825/M2826/M2835/M2836 series a.
Available maintenance parts You need to replace the maintenance parts at specific intervals to keep the machine in the best condition and avoid print quality and paper feeding problems resulting from the worn-out parts. Maintenance parts are mostly rollers, belts and pads. However, the replacement period and parts may differ depending on the model. Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine.
Storing the toner cartridge Toner cartridges contain components that are sensitive to light, temperature and humidity. Samsung suggests users follow these recommendations to ensure optimal performance, highest quality, and longest life from your new Samsung toner cartridge. Store this cartridge in the same environment in which the printer will be used. This should be in controlled temperature and humidity conditions.
Storing the toner cartridge 3 Estimated cartridge life Estimated cartridge life the life of the toner cartridge (or imaging unit) yield depends on the amount of toner that print jobs require. The actual print yield may vary depending on the print density of the pages you print on, operating environment, percentage of image area, printing interval, media type and/or media size.
Redistributing toner When the toner cartridge is near the end of its life: • White streaks or light printing occurs and/or density variation side to side. • The Toner LED blinks orange. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. • Before opening the front cover, close the output support first.
Redistributing toner 5 M2625/M2626/M2825/M2826/M2835/M2836 series 2 1 3.
Replacing the toner cartridge • Before opening the front cover, close the output support first. • Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge. • If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Shake the toner cartridge thoroughly, it will increase the initial print quality. • Do not touch the green underside of the toner cartridge.
Replacing the toner cartridge 6 M2620/M2621/M2820/M2830 series Click this link to open an animation about replacing a toner cartridge. 3.
Replacing the toner cartridge 7 M2625/M2626/M2825/M2826/M2835/M2836 series Click this link to open an animation about replacing a toner cartridge. 3.
Replacing the imaging unit 8 M2625/M2626/M2825/M2826/M2835/M2836 series Click this link to open an animation about replacing an imaging unit. 2 1 1 2 3.
Cleaning the machine If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing condition and use your machine longer. • Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the cabinet.
Cleaning the machine Use a dry lint free cloth when cleaning the inside of the machine, be careful not to damage the transfer roller or any other inside parts. Do not use solvents such as benzene or thinner. Printing quality problems can occur and cause damage to the machine. 1 2 1 2 2 2 1 1 3.
Cleaning the machine 11 Cleaning the pickup roller • Use a dry lint-free cloth to clean the machine. • If your machine has a power switch, turn the power switch off before cleaning the machine. 1 2 2 1 3.
Tips for moving & storing your machine • When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or reduce print quality. • When moving the machine, make sure at least two people are holding the machine securely. 3.
4. Troubleshooting This chapter gives helpful information for what to do if you encounter an error. • Tips for avoiding paper jams 59 • Clearing paper jams 60 • Understanding the LED 68 This chapter gives helpful information for what to do if you encounter an error. If your machine has a display screen, check the message on the display screen first to solve the error. If you cannot find a solution to your problem in this chapter, refer to the Advanced Guide (see "Troubleshooting" on page 197).
Tips for avoiding paper jams By selecting the correct media types, most paper jams can be avoided. To avoid paper jams, refer to the following guidelines: • Ensure that the adjustable guides are positioned correctly (see "Tray overview" on page 27). • Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. • Do not remove paper from the tray while your machine is printing. • Flex, fan, and straighten paper before loading.
Clearing paper jams To avoid tearing the paper, pull the jammed paper out slowly and gently. 1 In tray 1 Click this link to open an animation about clearing a jam. 4.
Clearing paper jams 2 In the manual feeder Click this link to open an animation about clearing a jam. 4.
Clearing paper jams 3 Inside the machine • The fuser area is hot. Take care when removing paper from the machine. • Before opening the front cover, close the output support first. 4.
Clearing paper jams M2620/M2621/M2820/M2830 series Click this link to open an animation about clearing a jam. 1 22 4.
Clearing paper jams M2625/M2626/M2825/M2826/M2835/M2836 series Click this link to open an animation about clearing a jam. 1 2 2 1 1 2 4.
Clearing paper jams 4 In the exit area Click this link to open an animation about clearing a jam. 4.
Clearing paper jams 5 In the duplex area Click this link to open an animation about clearing a jam. 4.
Clearing paper jams If you do not see the paper in this area, stop and go to next step: 1 2 4.
Understanding the LED The color of the LED indicates the machine's current status. • • • • Some LEDs may not be available depending on model or country (see "Control panel overview" on page 18). To resolve the error, look at the error message and its instructions from the troubleshooting part (see "Troubleshooting" on page 197). You also can resolve the error with the guideline from the computers’ Samsung Printer Status program window (see "Using Samsung Printer Status" on page 189).
Understanding the LED 6 Status LED Status Description • The machine is off-line. Off • The machine is in power save mode. Blinking Green • When the backlight slowly blinks, the machine is receiving data from the computer. • When the backlight blinks rapidly, the machine is printing data. On • The machine is on-line and can be used. Blinking A minor error has occurred and the machine is waiting for the error to be cleared. When the problem is cleared, the machine resumes.
Understanding the LED 7 Toner LED/ WPS LED/ Power LED/ Eco LED Status (Toner LED) (WPS LED)b Description Blinking Small amount of toner is left in the cartridge. The estimated cartridge life of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page 48). On A toner cartridge has almost reached its estimated cartridge lifea.
5. Appendix This chapter provides product specifications and information concerning applicable regulations.
Specifications 1 General specifications The specification values listed below are subject to change without notice. See www.samsung.com for possible changes in information. Items Dimension Width x Length x Height Description 368 x 334.5 x 202 mm (14.49 x 13.17 x 7.95 inches) • M2620 series: 7.0 kg (15.43 lbs) • M2621/M2625/M2626 series: 7.2 kg (15.87 lbs) Weight Machine with consumables • M2625D/M2626D series: 7.4 kg (16.31 lbs) • M2820/M2830 series: 7.2 kg (15.
Specifications Items Average operating mode Less than 400 W Ready mode Less than 45 W • M262x/M262xD/M262xND: Less than 0.9 W d Power consumption Description Power save mode • M282xND: Less than 1.0 W • M282xDW/M283xDW: Less than 1.8 W (Wi-Fi Direct off: Less than 1.3 Wg) Power off modee Less than 0.2 W (0.1 Wf) • M262xD: Less than 1.16 W Network Standby Mode (All Port Activation) • M282xND: Less than 1.56 W • M282xDW/M283xDW: Less than 1.76 W Wireless g a. b. c. d. e. f. g.
Specifications 2 Print media specifications Print media weight/Capacitya Type Size Dimensions Manual feederb Tray Letter 216 x 279 mm (8.5 x 11 inches) 60 to 163 g/m2 (16 to 43 lbs bond) 60 to 220 g/m2 (16 to 59 lbs bond) Legal 216 x 356 mm (8.5 x 14 inches) • 250 sheets of 80 g/m2 (21 lbs bond) • US Folio 216 x 330 mm (8.5 x 13 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.5 x 13.5 inches) JIS B5 182 x 257 mm (7.17 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.
Specifications Print media weight/Capacitya Type Size Dimensions Tray Envelope Monarch 98 x 191 mm (3.87 x 7.5 inches) Envelope No. 10 105 x 241 mm (4.12 x 9.5 inches) Envelope DL 110 x 220 mm (4.33 x 8.66 inches) Envelope C5 162 x 229 mm (6.38 x 9.02 inches) Envelope C6 114 x 162 mm (4.49 x 6.
Specifications Print media weight/Capacitya Type Size Dimensions Tray Card stock Letter, Legal, US Folio, A4, JIS B5, ISO B5, Executive, A5, Manual feederb Refer to the Plain paper section 121 to 163 g/m2 (32 to 43 lbs bond) 121 to 163 g/m2 (32 to 43 lbs bond) Refer to the Plain paper section 106 to 120 g/m2 (28 to 32 lbs bond) 106 to 120 g/m2 (28 to 32 lbs bond) • Manual feeder: 76 x 127 mm (3 x 5 inches) 60 to 163 g/m2 (16 to 43 lbs bond) d, e Postcard 4x6 Bond paper Refer to the Plain pape
Specifications 3 System requirements Microsoft® Windows® Requirement (recommended) Operating system CPU RAM free HDD space Windows® XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256 MB) 1.5 GB Windows Server® 2003 Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512 MB) 1.
Specifications Requirement (recommended) Operating system CPU Windows Server® 2012 RAM Intel® Pentium® IV 1.4 GHz (x64) processors (2 GHz or faster) free HDD space 512 MB (2 GB) 32 GB Windows Server® 2012 R2 • Internet Explorer 6.0 or higher is the minimum requirement for all Windows operating systems. • Users who have administrator rights can install the software. • Windows Terminal Services is compatible with your machine. Mac Requirements (Recommended) Operating system CPU Mac OS X 10.
Specifications Linux Items Requirements Red Hat Enterprise Linux 5, 6 Fedora 11, 12, 13, 14, 15, 16, 17, 18, 19 openSUSE 11.0, 11.1, 11.2, 11.3, 11.4, 12.1, 12.2, 12.3 Operating system Ubuntu 10.04, 10.10, 11.04, 11.10, 12.04, 12.10, 13.04 SUSE Linux Enterprise Desktop 10, 11 Debian 5.0, 6.0, 7.0, 7.1 Mint 13, 14 , 15 CPU Pentium IV 2.4GHz (Intel Core™2) RAM 512 MB (1 GB) Free HDD space 1 GB (2 GB) 5.
Specifications Unix Items Requirements Sun Solaris 9, 10, 11 (x86, SPARC) Operating system HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium) IBM AIX 5.1, 5.2, 5.3, 5.4, 6.1 7.1 (PowerPC) Free HDD space Up to 100 MB 5.
Specifications 4 Network environment Network and wireless models only (see "Features by model" on page 6). You need to set up the network protocols on the machine to use it as your network machine. The following table shows the network environments supported by the machine. Items Network interface Specifications • Ethernet 10/100 Base-TX Wired Lan • 802.
Regulatory information This machine is designed for a normal work environment and certified with several regulatory statements. When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons: 5 Laser safety statement The printer is certified in the U.S.
Regulatory information 7 9 Power saver China only This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Website: http://www.samsung.com/cn/support/location/ supportServiceLocation.do?page=SERVICE.
Regulatory information The United States of America only 10 Correct disposal of this product (Waste electrical & electronic equipment) (Applicable in countries with separate collection systems) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
Regulatory information 13 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or experienced radio TV technician for help. Radio frequency emissions FCC information to the user This device complies with Part 15 of the FCC Rules.
Regulatory information 14 United States of America Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Federal communications commission (FCC) Intentional emitter per FCC Part 15 Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.
Regulatory information 15 17 Russia / Kazakhstan / Belarus only Turkey only 18 Thai only 19 Replacing the fitted plug (for UK only) 16 Germany only Important The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.
Regulatory information 20 If you cut off the moulded plug, get rid of it straight away. You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. Important warning: You must earth this machine.
Regulatory information EC Certification Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC.
Regulatory information 21 Regulatory compliance statements Wireless guidance Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory information Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.
Regulatory information 23 China only ᳝ᆇ⠽䋼 5.
Copyright © 2013 Samsung Electronics Co., Ltd. All rights reserved. This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide. • Samsung and the Samsung logo are trademarks of Samsung Electronics Co., Ltd.
User’s Guide ADVANCED ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC This guide provides information concerning the installation, basic operation and troubleshooting on Windows.
ADVANCED 1. Software Installation 3. Special Features Installation for Mac 98 Altitude adjustment 158 Reinstallation for Mac 99 Changing the default print settings 159 Installation for Linux 100 Setting your machine as a default machine 160 Reinstallation for Linux 101 Using advanced print features 161 Using Direct Printing Utility 170 Mac printing 172 Linux printing 174 Unix printing 176 2.
ADVANCED 5.
1. Software Installation This chapter provides instructions for installing essential and helpful software for use in an environment where the machine is connected via a cable. A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine’s driver (see "Installing driver over the network" on page 109).
Installation for Mac 1 Make sure that the machine is connected to your computer and powered on. 10 Select USB Connected Printer on the Printer Connection Type and click Continue. 2 Insert the supplied software CD into your CD-ROM drive. 11 Click Add Printer button to select your printer and add it to your printer list. 12 After the installation is finished, click Close. 3 Double-click the CD-ROM icon that appears on your Mac desktop. • 4 5 6 7 8 For Mac OS X 10.
Reinstallation for Mac If the printer driver does not work properly, uninstall the driver and reinstall it. 1 Open the Applications folder > Samsung > Printer Software Uninstaller. 2 3 4 5 To uninstall printer software, Click Continue. Check the program you want to delete and click Uninstall. Enter the password and click OK. After the uninstallation is finished, click Close. If a machine has already been added, delete it from the Print Setup Utility or Print & Fax. 1.
Installation for Linux You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads). 1 Installing the Unified Linux Driver 8 9 10 11 When installation finished, launch printing utility(Go to System > Administration > Printing or execute "system-config-printer" command in Terminal program). Click Add button. Select your printer. Click Forward button and add it to your system.
Reinstallation for Linux If the printer driver does not work properly, uninstall the driver and reinstall it. Open Terminal program. 1 2 3 Move to uld folder extracted from Unified Linux Driver package. 4 Proceed with uninstallation. Execute "./uninstall.sh" command (If you're not logged in as root, execute the command with "sudo" as "sudo ./uninstall.sh") 1.
2. Using a NetworkConnected Machine This chapter gives you step-by-step instructions for setting up a network connected machine and software.
Useful network programs There are several programs available to setup the network settings easily in a network environment. For the network administrator especially, managing several machines on the network is possible. Before using the programs below, set the IP address first. 2 SyncThru™ Web Admin Service Web-based machine management solution for network administrators.
Wired network setup You must set up the network protocols on your machine to use it on your network. Using this Network Configuration Report, you can find your machine’s MAC address and IP address. You can use network after connecting network cable to a corresponding port on your machine. For example: For models that do not have the display screen on the control panel, use the SyncThru™ Web Service or SetIP program. • See "Using SyncThru™ Web Service" on page 183.
Wired network setup 1 2 3 4 5 Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or Downloads). Follow the instructions in the installation window. Before using the SetIP program, disable the computer firewall from System Preferences > Security > Firewall. Connect your machine to the network with a network cable. The following instructions may vary from your model. Turn on the machine.
Wired network setup 8 Click Install. All components necessary for machine operations will be installed. IPv4 configuration using SetIP (Linux) If you click Customize, you can choose individual components to install. Before using the SetIP program, disable the computer firewall from System Preferences or Administrator. 9 10 Enter the password and click OK. 11 Select Network Connected Printer(Wired or Wireless) on the Printer Connection Type and click Set IP Address button.
Wired network setup From the SyncThru™ Web Service 6 IPv6 configuration Activating IPv6 IPv6 is supported properly only in Windows Vista or higher. • Some features and optional goods may not be available depending on model or country (see "Features by model" on page 6 ). • If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again using Clear Setting. 1 Access a web browser, such as Internet Explorer, from Windows.
Wired network setup • You can also set the DHCPv6. Address must be enclosed in '[ ]' brackets. • To manually set the IPv6 address: Check the Manual Address check box. Then, the Address/Prefix text box is activated. Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F). IPv6 address configuration 1 Start a web browser, such as Internet Explorer, that supports IPv6 addressing as a URL.
Installing driver over the network • Some features and optional goods may not be available depending on model or country (see "Features by model" on page 6). • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 17). • You can install the printer driver and software when you insert the software CD into your CD-ROM drive. For windows, select the printer driver and software in the Select Software to Install window. 2.
Installing driver over the network window. Then, click Next. 7 Windows 1 2 Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 104). Insert the supplied software CD into your CD-ROM drive. 4 Select Network connection on the Printer Connection Type screen. Then, click Next. 5 Follow the instructions in the installation window.
Installing driver over the network 1 2 3 Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 104). From Charms, select Settings > Change PC settings > Devices. Click Add a device. Discovered machines will be shown on the screen. 4 Click the model name or host name you wish to use. Silent installation Mode Silent installation mode is an installation method that does not require any user intervention.
Installing driver over the network Command- line Definition /p”” or Specifies printer port. /P”” Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Description Command- line Definition Description Printer port name can be specified as IP address, hostname, USB local port name, IEEE1284 port name or network path. /a”” or Specifies destination path for installation.
Installing driver over the network Command- line /x or /X /up”” or /UP”” /d or /D /v”” or /V”” /o or /O Definition Description Uses existing machine driver files to create printer instance if it is already installed. This command provides a way to install a printer instance that uses installed printer driver files without installing an additional driver. Removes only specified printer instance and not the driver files.
Installing driver over the network 7 8 Click Agree to agree to the license agreement. Click Install. All components necessary for machine operations will be installed. If you click Customize, you can choose individual components to install. 9 Linux You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads). 9 10 Enter the password and click OK.
Installing driver over the network 9 10 11 Click Add button. Installing the UNIX printer driver package Select AppSocket/HP JetDirect and enter your machine’s IP address. The installation procedure is common for all variants of UNIX OS mentioned. Click Forward button and add it to your system. 1 From the Samsung website, download and unpack the UNIX Printer Driver package to your computer. 2 Acquire root privileges.
Installing driver over the network 7 8 Execute the “. /install –c” command to verify installation results. Setting up the printer Run “installprinter” from the command line. This will bring up the Add Printer Wizard window. Setup the printer in this window referring to the following procedures. To add the printer to your UNIX system, run ‘installprinter’ from the command line. This will bring up the Add Printer Wizard window.
Installing driver over the network 11 12 Check the Make Default option to set this printer as default. Click OK to add the printer. 2.
Wireless network setup • Make sure your machine supports wireless networking. Wireless networking may not be available depending on the model (see "Features by model" on page 6). • If the IPv6 network seems to not be working, set all the network settings to the factory defaults and try again using Clear Setting.
Wireless network setup 12 Introducing wireless set up methods You can set wireless settings either from the machine or the computer. Choose the setting method from the below table. • If problems occur during wireless set up or driver installation, refer to the troubleshooting chapter (see "Troubleshooting" on page 145). • It is strongly recommended that you set the password on Access Points.
Wireless network setup Set up method Without Access Point Connecting method From the computer Description & Reference Windows user, see "Ad hoc via USB cable" on page 130. Mac user, see "Ad hoc via USB cable" on page 130. Wi-Fi Direct setup See "Setting up Wi-Fi Direct" on page 143. 2.
Wireless network setup Choosing your type 13 Using the WPS button There are two methods available to connect your machine to a wireless network If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™ (WPS), you can easily configure the wireless network settings by pressing the (WPS) button on the control panel without a computer. • If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine.
Wireless network setup Machines with a display screen Connecting in PBC mode 1 Press and hold the 2 seconds. (WPS) button on the control panel for more than Connecting in PIN mode 1 Press and hold the 2 seconds. 2 The eight-digit PIN appears on the display. You need to enter the eight-digit PIN within two minutes on the computer that is connected to the access point (or wireless router).
Wireless network setup Machines without a display screen Connecting in PBC mode 1 Connecting in PIN mode 1 In ready mode, Press the (Cancel or Stop/Clear) button for more than five seconds on the control panel. Press and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine without the The machine starts connecting to the wireless network.
Wireless network setup Re-connecting to a network Disconnecting from a network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. To disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds.
Wireless network setup Access point via USB cable 3 Insert the supplied software CD into your CD-ROM drive. Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable If the installation window does not appear, click Start > All programs > Accessories > Run. X:\Setup.exe replacing “X” with the letter, which represents your CDROM drive and click OK.
Wireless network setup 5 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 7 Select Using a USB cable on the Select the Wireless Setup Method screen. Then, click Next. 6 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next. 8 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next.
Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key.
Wireless network setup 11 12 Select the components to be installed. Follow the instructions in the installation window. Access point without a USB cable (recommended) Creating the infrastructure network 1 2 Turn on your computer, access point, and machine. Insert the supplied software CD into your CD-ROM drive.
Wireless network setup 4 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 5 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next. 6 Select Using a direct wireless connection on the Select the Wireless Setup Method screen. Then, click Next. If your printer is already connected on the network, select No, my printer is already connected to my network. 2.
Wireless network setup Ad hoc via USB cable Even if your computer is running Windows 7 or higher, you cannot use this feature if your PC does not support wireless network. Set the wireless network using a USB cable (see "Access point via USB cable" on page 125). If below screen appears, press the panel within 2 minutes. 7 8 If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below.
Wireless network setup Creating the ad hoc network in Windows 1 2 4 Select Wireless network connection on the Printer Connection Type screen. Then, click Next. 5 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my printer's wireless network. Then, click Next. Turn on your computer and the wireless network machine. Insert the supplied software CD into your CD-ROM drive.
Wireless network setup • Enter the wireless Network Name: Enter the SSID name you want (SSID is case-sensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
Wireless network setup 9 10 11 The Wireless Network Setting Complete window appears. Click Next. When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 1 Make sure that the machine is connected to your computer and powered on. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Mac desktop. Follow the instructions in the installation window.
Wireless network setup 10 Select Configuration of Wireless network on the Printer Connection Type and click Continue. 11 If Wireless Settings screen appears, select Using a USB cable and click Next. If the screen does not appear, go to step 15. 12 After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next. When you set the wireless configuration manually, click Advanced Setting.
Wireless network setup • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network. WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key.
Wireless network setup 3 Double-click the CD-ROM icon that appears on your Mac desktop. • 4 5 6 7 8 For Mac OS X 10.8, double-click the CD-ROM that appears on Finder. 10 Select Configuration of Wireless network on the Printer Connection Type and click Continue. Double-click the MAC_Installer folder > Installer OS X icon. Click Continue. Read the license agreement and click Continue. Click Agree to agree to the license agreement. Click Install.
Wireless network setup 11 If Wireless Settings screen appears, select Using a direct wireless connection and click Next. If below screen appears, press the If the screen does not appear, go to step 13. within 2 minutes. 12 13 (WPS) button from the control panel When the wireless network set up is completed, click Next. After the installation is finished, click Close.
Wireless network setup Items to prepare • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Mac 1 Make sure that the machine is connected to your computer and 6 7 8 Read the license agreement and click Continue. Click Agree to agree to the license agreement. Click Install. All components necessary for machine operations will be installed.
Wireless network setup • Enter the wireless Network Name: Enter the SSID name (SSID is casesensitive). • Operation Mode: Select ad hoc. • Channel: Select the channel (Auto Setting or 2412 MHz to 2467 MHz). • Authentication: Select an authentication type. Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security. Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
Wireless network setup 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next. • After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 109). If the network cable is connected, it may have trouble finding the machine when configuring the wireless network.
Wireless network setup IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. 1 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable.
Wireless network setup 7 Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network password" on page 118).
Wireless network setup 4 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons. • ID: admin • Password: sec00000 5 When the SyncThru™ Web Service window opens, click Network Settings. 6 Click Wireless > Custom. You can also turn the Wi-Fi network on/off. • You cannot connect your mobile device to the internet through the printer’s Wi-Fi Direct.
Wireless network setup - Device Name: Enter the printer’s name for searching for your printer on a wireless network. By default, the device name is the model name. - IP Address: Enter the IP address of the printer. This IP address is used only for the local network and not for the infrastructure wired or wireless network. We recommend using the default local IP address (the default local IP address of the printer for Wi-Fi Direct is 192.168.3.
Wireless network setup Connecting Failure - SSID Not Found • When you have found the printer you want to connect to from your mobile device, select the printer and the printer's LED will blink. Press the WPS button on the printer and it will be connected to your mobile device. • If your mobile device does not support WPS, you need to enter the "Network Key" of a printer instead of pushing the WPS button. • The machine is unable to find the network name (SSID) you have selected or entered.
Wireless network setup Connecting Failure - Invalid Security the product's IP address and the printer port's IP address. • How to compare: Security is not configured correctly. Check the configured security on your access point and machine. Connecting Failure - General Connection Error • Your computer is not receiving a signal from your machine. Check the USB cable and your machine’s power.
Wireless network setup - For a Static network environment • Check the wireless reception around the machine. If the router is far from the machine or there is an obstacle, you might have difficulty receiving the signal. • Cycle the power for the access point (or wireless router), machine, and computer. Sometimes cycling the power can recover network communication. • Check whether firewall software (V3 or Norton) is blocking the communication.
Wireless network setup • Check the wireless environment. You might not be able to connect to the network in the infrastructure environment where you need to type in a user's information before connecting to the access point (or wireless router). • This machine only supports IEEE 802.11 b/g/n and Wi-Fi. Other wireless communication types (e.g., Bluetooth) are not supported.
Samsung Mobile Print 20 22 Supported Mobile OS What is Samsung Mobile Print? Samsung Mobile Print is a free application that enables users to print photos, documents, and web pages directly from your smartphone or tablet. Samsung • Android OS 2.3 or higher • iOS 4.0 or higher Mobile Print is not only compatible with your Android and iOS smart phones but also with your iPod Touch and tablet PC.
Using the NFC feature The NFC(Near Field Communication) printer allows you to directly print from your cellphone just by holding your cellphone over the NFC tag on your printer. It does not require installing print driver or connecting to an access point. You just need NFC supported cellphone. In order to use this feature, Samsung Mobile Print app needs to be installed on your cellphone. 23 Requirements • • Depending on the material of the mobile device cover, NFC recognition may not work properly.
Using the NFC feature 24 Printing 1 2 Check that NFC and Wi-Fi Direct features are enabled on your mobile device and Wi-Fi Direct feature is enabled on your printer (see "Setting the Wi-Fi Direct for mobile printing" on page 143). 3 4 Select print mode. Select the content you want to print. If necessary, change the print option by pressing the 5 Tag the NFC tag on your mobile device (usually located on the back of the mobile device) over the NFC tag( ) on your printer.
Using the NFC feature 25 Registering Google Cloud Printer 1 Check that NFC and Wi-Fi Direct features are enabled on your mobile device and Wi-Fi Direct feature is enabled on your printer. 2 Tag the NFC tag on your mobile device (usually located on the back of the mobile device) over the NFC tag( ) on your printer. 3 4 5 Select device status icon. Select Google Cloud Print > Register Google Cloud Printer.
AirPrint Only AirPrint certified machines can use the AirPrint feature. Check the box your machine came in for the AirPrint certified mark. AirPrint allows you to wirelessly print directly from iPhone, iPad and iPod touch running the latest version of iOS. • ID: admin • Password: sec00000 5 When the SyncThru™ Web Service window opens, click Settings > Network Settings. 6 Click Raw TCP/IP, LPR, IPP or mDNS . You can enable the IPP protocol or mDNS protocol.
Google Cloud Print™ Google Cloud Print™ is a service that allows you to print to a printer using your If the network environment of your printer is using a proxy server, you need to configure smart phone, tablet, or any other web-connected devices. Just register your Google account with the printer, and you are ready to use the Google Cloud Print™ service.
Google Cloud Print™ Registering from the Chrome Browser If the network environment is using a proxy server, you need to configure the proxy’s IP and port number from Settings > Network Settings > Google Cloud Print > Proxy Setting. Contact your network service provider or network administrator for more information. • Make sure the printer machine is turned on and connected to a wired or wireless network that has access to the Internet. • You should create your Google account in the advance.
Google Cloud Print™ 29 Printing with Google Cloud Print™ The printing procedure varies depending on the application or the device you are using. You can see the application list that supports Google Cloud Print™ service. 5 6 7 Tap the Cloud Print button. Set the printing options if you want. Tap Click here to Print. Printing from the Chrome browser Make sure the printer is turned on and connected to a wired or wireless network that has access to the Internet.
3. Special Features This chapter explains special printing features. • Altitude adjustment 158 • Changing the default print settings 159 • Setting your machine as a default machine 160 • Using advanced print features 161 • Using Direct Printing Utility 170 • Mac printing 172 • Linux printing 174 • Unix printing 176 The procedures in this chapter are mainly based on Windows 7.
Altitude adjustment Print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for the best print quality. Before you set the altitude value, determine the altitude where you are.
Changing the default print settings 1 Click the Windows Start menu. • 2 3 4 For Windows 8, from the Charms, select Search > Settings. If you want to change the settings for each print job, change it in Printing Preferences. For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.
Setting your machine as a default machine 1 Click the Windows Start menu. • 2 3 4 For Windows 8, from the Charms, select Search > Settings. For Windows XP/Server 2003, select Printer and Faxes. • For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers. • For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers. • For Windows 7/ Windows 8, select Control Panel > Devices and Printers. Select your machine.
Using advanced print features • XPS printer driver: used to print XPS file format. 1 Check the Print to file box in the Print window. 2 3 Click Print. - The XPS printer driver can be installed only on Windows Vista OS or higher. - Install optional memory when an XPS job does not print because the printer is out of memory. - For models that provide XPS driver from the Samsung website, http:/ /www.samsung.com > find your product> Support or downloads.
Using advanced print features 2 Understanding special printer features You can use advanced printing features when using your machine. To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window to change the print settings. The machine name, which appears in the printer properties window, may differ depending on the machine in use. • Some menus may not appear on the display depending on options or models.
Using advanced print features Item Poster Printing Description Prints a single-page document onto 4 (Poster 2x2), 9 (Poster 3x3), or 16 (Poster 4x4) sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. Select the Poster Overlap value. Specify Poster Overlap in millimeters or inches by selecting the radio button on the upper right of Basic tab to make it easier to paste the sheets together.
Using advanced print features Item • Double-sided Printing Description Print on both sides of a sheet of paper (duplex). Before printing, decide how you want your document oriented. • Double-sided Printing (Manual)a • You can use this feature with Letter, Legal, A4, US Folio or Oficio sized paper • If your machine does not have a duplex unit, you should complete the printing job manually. The machine prints every other page of the document first. After that, a message appears on your computer.
Using advanced print features Item Description • Double-sided Printing • Double-sided Printing Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. (Manual)a • Printer Default: If you select this option, this feature is determined by the settings you have selected on the control panel of the machine. • None: Disables this feature. • Long Edge: This option is the conventional layout used in bookbinding.
Using advanced print features Item Description Watermark The watermark option allows you to print text over an existing document. For example, you use it when you want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. Watermark a To change the print settings from your software application, access Printing Preferences. b Click the Advanced tab, select Edit from the Watermark drop-down list.
Using advanced print features Item Description This option is available only when you use the PCL/SPL printer driver (see "Software" on page 6). Overlaya An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing exactly the same information that is currently on your letterhead.
Using advanced print features Item Overlay (Using a page overlay) Overlay (Deleting a page overlay) Description a Click the Advanced tab. b Select the desired overlay from the Text drop-down list. c If the overlay file you want does not appear in the Text drop-down list, select Edit... from the list and click Load. Select the overlay file you want to use. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Open window.
Using advanced print features Item Description • This feature is available only if you have installed the optional hard disk or set the Ram Disk. To set the Ram Disk, you must enable it from SyncThru™ Web Service> Settings > Machine Settings > Ram Disk. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. • You can see the print job list you set in the printer driver's Print Mode in the Job Management menu using the control panel.
Using Direct Printing Utility 4 • Direct Printing Utility may not be available depending on model or optional goods (see "Software" on page 6). • Available for Windows OS users only. Printing There are several ways you can print using the Direct Printing Utility. 1 3 • What is Direct Printing Utility? Direct Printing Utility is a program that sends the PDF files directly to your machine to print without having to opening the file.
Using Direct Printing Utility 5 Using the right-click menu 1 Right-click on the PDF file to print and select Direct Printing. The Direct Printing Utility window appears with the PDF file is added. 2 3 4 Select the machine to use. Customize the machine settings. Click Print. The selected PDF file is sent to the machine. 3.
Mac printing 7 Changing printer settings Some features may not be available depending on models or options. It means that the features are not supported. You can use advanced printing features when using your machine. 6 Printing a document When you print with a Mac, you need to check the printer driver settings in each application you use. Follow the steps below to print from a Mac: Open an application and select Print from the File menu.
Mac printing 9 If you print more than 2 copies, the first copy and the second copy might print on the same sheet of paper. Avoid printing on both sides of paper when you are printing more than 1 copy. Printing on both sides of the paper Some features may not be available depending on models or options. It means that the features are not supported (see "Variety feature" on page 7). 10 Using help Before printing in the duplex mode, decide on which edge you will be binding your finished document.
Linux printing Some features may not be available depending on models or options. It means that the features are not supported. Automatic/manual duplex printing may not be available depending on models. You can alternatively use the lp or lpr printing system or other applications for odd-even printing. 11 Printing from applications 12 Printing files There are a lot of Linux applications that allow you to print using Common UNIX Printing System (CUPS).
Linux printing 13 Configuring Printer Properties You can change the default printing options or connection type with Printing utility supplied by o/s. 1 Launch Printing utility(Go to System > Administration > Printing menu or execute "system-config-printer" command in Terminal program). 2 3 4 Select your printer and double-click it. Change default printing options or connection type. Click Apply button. 3.
Unix printing 15 Some features may not be available depending on models or options. It means that the features are not supported (see "Features by model" on page 6). Changing the machine settings The UNIX printer driver Print Job Manager in which the user can select various print options in printer Properties. 14 Proceeding the print job The following hot keys may also be used: “H” for Help, “O” for OK, “A” for Apply, and “C” for Cancel.
Unix printing • Page Border: Choose any of the border styles (e.g., Single-line hairline, Double-line hairline) Image tab In this tab, you can change the brightness, resolution, or image position of your document. Text tab Set the character margin, line space, or the columns of the actual print output. Margins tab • Use Margins: Set the margins for the document. By default, margins are not enabled. The user can change the margin settings by changing the values in the respective fields.
4. Useful Management Tools This chapter introduces management tools provided to help you make full use of your machine.
Accessing management tools Samsung provides a variety of management tools for Samsung printers. 1 Make sure that the machine is connected to your computer and powered on. 2 From the Start menu, select Programs or All Programs. • 3 4 5 For Windows 8, from Charms, select Search > Apps. Find Samsung Printers. Under Samsung Printers, you can see installed management tools. Click the management tool you want to use.
Easy Capture Manager • Available for Windows OS users only. • This feature may not be available depending on model or optional goods. Capture your screen and launch Easy Capture Manager by simply pressing the Print Screen key on the keyboard. Now you can easily print your captured screen as captured or edited. 4.
Samsung AnyWeb Print • Available for Windows OS users only. • This feature may not be available depending on model or optional goods. This tool helps you screen-capture, preview, scrap, and print Windows Internet Explorer pages more easily, than when you use an ordinary program. Download the software from the Samsung website then unpack and install it: (http://www.samsung.com > find your product > Support or Downloads). 4.
Easy Eco Driver • This feature may not be available depending on model or optional goods (see "Software" on page 6). • Available for Windows OS users only (see "Software" on page 6). With the Easy Eco Driver, you can apply Eco features to save paper and toner before printing. Easy Eco Driver also allows you simple editing such as removing images and texts, and more. You can save frequently used settings as a preset. How to use: 1 Open a document to print.
Using SyncThru™ Web Service • Internet Explorer 6.0 or higher is the minimum requirement for SyncThru™ Web Service. • SyncThru™ Web Service explanation in this user’s guide may differ from your machine depending on its options or models. • Network model only. 1 2 Click Login on the upper right of the SyncThru™ Web Service website. Type in the ID and Password then click Login.
Using SyncThru™ Web Service Settings tab 2 SyncThru™ Web Service overview This tab allows you to set configurations provided by your machine and network. You need to log-in as an administrator to view this tab. • Machine Settings tab: Sets options provided by your machine. • Network Settings tab: Shows options for the network environment. Sets options such as TCP/IP and network protocols. Some tabs may not appear depending on your model.
Using SyncThru™ Web Service 3 Setting the system administrator’s information This setting is necessary for using the e-mail notification option. 1 Start a web browser, such as Internet Explorer, from Windows. Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go. 2 3 4 Your machine’s embedded website opens. 5 Click Apply.
Using Samsung Easy Printer Manager • This feature may not be available depending on model or optional goods (see "Software" on page 6). • Available for Windows and Mac OS users only (see "Software" on page 6). • For Windows, Internet Explorer 6.0 or higher is the minimum requirement for Samsung Easy Printer Manager. Open the Applications folder > Samsung folder > Samsung Easy Printer Manager.
Using Samsung Easy Printer Manager Printer list The Printer List displays printers installed on your computer and network printers added by network discovery (Windows only). Printer information This area gives you general information about your machine. You can check information, such as the machine’s model name, IP address (or Port name), and machine status. 1 2 You can view the online User’s Guide. Troubleshooting button: This button opens the Troubleshooting Guide when an error occurs.
Using Samsung Easy Printer Manager 5 Advanced settings user interface overview The advanced user interface is intended to be used by the person responsible for managing the network and machines. Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. Device Settings You can configure various machine settings such as machine setup, paper, layout, emulation, network, and print information.
Using Samsung Printer Status The Samsung Printer Status is a program that monitors and informs you of the machine status. Icon • The Samsung Printer Status window and its contents shown in this user’s guide may differ depending on the machine or operating system in use. Mean Description Normal The machine is in ready mode and experiencing no errors or warnings. Warning The machine is in a state where an error might occur in the future.
Using Samsung Printer Status 3 Order Supplies You can order replacement toner cartridge(s) from online. User’s Guide You can view the online User’s Guide. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. 4 5 Close Close the window. 4.
Using Samsung Printer Experience Available for Windows 8 users only. The screenshot may differ depending on the model you are using. Samsung Printer Experience is a Samsung application that combines Samsung machine settings and machine management into one location. You can set device settings, order supplies, open troubleshooting guides, visit Samsung’s web site, and check connected machine information.
Using Samsung Printer Experience 8 2 User Guide You can view the online User’s Guide. You need to be connected to the Internet to use this feature. This button opens the Troubleshooting Guide when an error occurs. You can directly open the troubleshooting section in the user’s guide. Adding/Deleting Printers If you do not have any printer added to the Samsung Printer Experience, or if you want to add/delete a printer, follow the instructions below. You can only add/delete network connected printers.
Using Samsung Printer Experience Deleting a printer 9 Printing from Windows 8 1 From the Charms, select Settings. Or, right-click the Samsung Printer Experience page and select Settings. 2 3 4 Select Remove Printer Select the printer you want to delete. Click Yes. You can see that the deleted printer is removed from the screen. This section explains common printing tasks from the Start screen. Basic printing 1 2 3 4 Open the document to print. From the Charms, select Devices.
Using Samsung Printer Experience 5 Opening more settings Click the Print button to start the print job. The screen may appear somewhat different depending on the model or options. You can set up more printing parameters. 1 2 3 4 Open the document you want to print. From the Charms, select Devices. Select your printer from the list Click More settings.
Using Samsung Printer Experience Basic tab Advanced tab Basic Paper settings This option allows you to choose the basic printing settings such as copies, orientation, and document type. This option allows you to set the basic paper handling specifications. Eco settings This option allows you to set the various ways to layout your documents. Layout settings This option allows you to choose multiple pages per side to save media. 4.
Using Samsung Printer Experience Security tab Some features may not be available depending on the model or options. If this tab is not shown or disabled, it means that this features are not supported. Using the sharing feature Samsung Printer Experience allows you to print from other applications installed on the computer using the sharing feature. This feature is only available for printing jpeg, bmp, tiff, gif, and png file formats. 1 2 3 4 Select the content you want to print from other application.
5. Troubleshooting This chapter gives helpful information for what to do if you encounter an error.
Paper feeding problems Condition Suggested solutions Paper jams during printing. Clear the paper jam. Paper sticks together. • Check the maximum paper capacity of the tray. • Make sure that you are using the correct type of paper. • Remove paper from the tray and flex or fan the paper. • Humid conditions may cause some paper to stick together. Multiple sheets of paper do not feed. Different types of paper may be stacked in the tray. Load paper of only one type, size, and weight.
Power and cable connecting problems Click this link to open an animation about solving power problems. Condition Suggested solutions The machine is not receiving power, or the connection cable between the computer and the machine is not connected properly. • Connect the machine to the electricity supply first and press the (Power) button on the control panel. • Disconnect the machine’s cable and reconnect it. 5.
Printing problems Condition The machine does not print. Possible cause Suggested solutions The machine is not receiving power. Check the power cord connections. Check the power switch and the power source. The machine is not selected as the default machine. Select your machine as your default machine in Windows. Check the machine for the following: • The front cover is not closed. Close the front cover. • Paper is jammed. Clear the paper jam. • No paper is loaded. Load paper.
Printing problems Condition The machine does not print. Possible cause Suggested solutions The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver. The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative. The document size is so big that the hard disk space of the computer is insufficient to access the print job.
Printing problems Condition The machine prints, but the text is wrong, garbled, or incomplete. Pages print, but they are blank. Possible cause Suggested solutions The machine cable is loose or defective. Disconnect the machine cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer that you know works and try a print job. Finally, try a new machine cable. The wrong printer driver was selected.
Printing problems Condition Possible cause Suggested solutions Before printing, the machine emits vapor near the output tray. Using damp paper can cause vapor during printing. This is not a problem. Just keep printing. The machine does not print special-sized paper, such as billing paper. Paper size and paper size setting do not match. Set the correct paper size in the Custom in Paper tab in Printing Preferences. The printed billing paper is curled. The paper type setting does not match.
Printing quality problems If the inside of the machine is dirty or paper has been loaded improperly, there might be a reduction in print quality. See the table below to clear the problem. Condition Light or faded print Suggested Solutions • If a vertical white streak or faded area appears on the page, the toner supply is low. Install a new toner cartridge. • The paper may not meet paper specifications; for example, the paper may be too moist or rough.
Printing quality problems Condition Dropouts Suggested Solutions If faded areas, generally rounded, occur randomly on the page: • A single sheet of paper may be defective. Try reprinting the job. A aBb C A aBb C A aBb C A aBb C A aBb C White Spots • The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. • The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
Printing quality problems Condition Black background Suggested Solutions If the amount of background shading becomes unacceptable: • Change to a lighter weight paper. • Check the environmental conditions: very dry conditions or a high level of humidity (higher than 80% RH) can increase the amount of background shading. • Remove the old toner cartridge and install a new one. • Thoroughly redistribute the toner (see "Redistributing toner" on page 48). Toner smear • Clean the inside of the machine.
Printing quality problems Condition Background scatter A Suggested Solutions Background scatter results from bits of toner randomly distributed on the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. • If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side.
Printing quality problems Condition Page skew Suggested Solutions • Ensure that the paper is loaded properly. • Check the paper type and quality. • Ensure that the guides are not too tight or too loose against the paper stack. Curl or wave • Ensure that the paper is loaded properly. • Check the paper type and quality. Both high temperature and humidity can cause paper curl. • Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray.
Printing quality problems Condition Suggested Solutions Back of printouts are dirty • Check for leaking toner. Clean the inside of the machine. Solid color or black pages • The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. • The toner cartridge may be defective. Remove the toner cartridge and install a new one. A Loose toner • The machine may require repairing. Contact a service representative. • Clean the inside of the machine.
Printing quality problems Condition Character voids A Horizontal stripes Suggested Solutions Character voids are white areas within parts of characters that should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. • You may be printing on the wrong surface of the paper. Remove the paper and turn it around. • The paper may not meet paper specifications.
Printing quality problems Condition Suggested Solutions • An unknown image Your machine is probably being used at an altitude of 1,000 m (3,281 ft) or above. repetitively appears on a few The high altitude may affect the print quality, such as loose toner or light imaging. Change the altitude setting for your machine (See sheets "Altitude adjustment" on page 158). • Loose toner • Light print or contamination occurs 5.
Operating system problems 1 Common Windows problems Condition Suggested solutions “File in Use” message appears during installation. Exit all software applications. Remove all software from the startup group, then restart Windows. Reinstall the printer driver. “General Protection Fault”, “Exception OE”, “Spool 32”, or “Illegal Operation” messages appear. Close all other applications, reboot Windows and try printing again. “Fail To Print”, “A printer timeout error occurred” message appear.
Operating system problems 2 Common Mac problems Condition The machine does not print PDF files correctly. Some parts of graphics, text, or illustrations are missing. Suggested solutions Printing the PDF file as an image may enable the file to print. Turn on Print As Image from the Acrobat printing options. It will take longer to print when you print a PDF file as an image. Some letters are not displayed normally during cover page printing. Mac OS cannot create the font while printing the cover page.
Operating system problems 3 Common Linux problems Condition Suggested solutions When printing more than one copy, the second copy does not print. The problem occurs on Ubuntu 12.04 due to the problem in standard CUPS filter 'pdftops'. Update 'cups-filters' package to version 1.0.18 to fix the problem ('pdftops' is a part of 'cups-filters' package). Unchecking the collate option in the Print Dialog does not work. For some distributions, GNOME Print Dialog has an issue handling the collate option.
Contact SAMSUNG worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country/Region BELARUS Country/Region ALGERIA ANGOLA ARGENTINE ARMENIA AUSTRALIA AUSTRIA Customer Care Center 3004 (Toll Free) WebSite www.samsung.com/ n_africa/support www.samsung.com/ support 0800-555-SAM(7267) www.samsung.com/ar BOLIVIA 0-800-05-555 www.samsung.com/ support BOSNIA 1300 362 603 www.samsung.
Contact SAMSUNG worldwide Country/Region CHILE CHINA Customer Care Center 800-SAMSUNG (726-7864) [HHP] 02-24828200 400-810-5858 Bogotá en el 600 12 72 COLOMBIA Sin costo en todo el pais 01 8000 112 112 WebSite Country/Region www.samsung.com/ cl/support www.samsung.com/ cn/support 1-800-751-2676 COSTA RICA CROATIA Cote D’ Ivoire CYPRUS CZECH DENMARK www.samsung.com/ latin_en/support (English) www.samsung.com/ co DRC www.samsung.com/ latin/support (Spanish) 499999 www.samsung.
Contact SAMSUNG worldwide Country/Region FINLAND FRANCE Customer Care Center 030-6227 515 www.samsung.com/fi/ support 01 48 63 00 00 www.samsung.com/ fr/support 0180 6 SAMSUNG bzw. 0180 6 7267864* GERMANY WebSite Country/Region Customer Care Center 1-800-299-0033 www.samsung.com/ latin/support (Spanish) GUATEMALA www.samsung.com/ latin_en/support (English) www.samsung.com/ de/support 800-2791-9111 (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf) www.samsung.
Contact SAMSUNG worldwide Country/Region ITALIA Customer Care Center 800-SAMSUNG (800.7267864) www.samsung.com/ it/support 1-800-SAMSUNG (726-7864) www.samsung.com/ latin_en/support (English) JAMAICA JAPAN JORDAN KAZAKHSTAN KENYA 0120-363-905 www.samsung.com/ jp/support 0800-22273 www.samsung.com/ Levant 06 5777444 8-10-800-500-55-500 (GSM: 7799, VIP care 7700) 0800 545 545 183-CALL (183-2255) KUWAIT KYRGYZSTAN LATVIA LEBANON LITHUANIA WebSite www.samsung.com/ kz_ru/support www.samsung.
Contact SAMSUNG worldwide Country/Region NIGERIA NETHERLANDS NEW ZEALAND Customer Care Center WebSite 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/ nl/support 0800 726 786 www.samsung.com/ nz/support 001-800-5077267 www.samsung.com/ latin/support(Spanish) 02- 422-2111 [ Standard Landline ] www.samsung.com/ latin_en/support (English) 801-172-678* lub +48 22 607-93- www.samsung.com/ 33* pl/support 815 56480 www.samsung.com/ no/support 800-SAMSUNG (800 - 726 7864) www.samsung.
Contact SAMSUNG worldwide Country/Region Customer Care Center 800-CALL (800-2255) QATAR REUNION RWANDA 0262 50 88 80 9999 *8000 (apel in retea) ROMANIA RUSSIA 08008-726-78-64 (08008SAMSUNG) Apel GRATUIT SERBIA SINGAPORE SLOVENIA Country/Region www.samsung.com/ ae/support (English) SLOVAKIA www.samsung.com/ ae_ar/support (Arabic) SOUTH AFRICA www.samsung.com/ support SPAIN www.samsung.com/ support SRI LANKA www.samsung.com/ ro/support 8-800-555-55-55 (VIP care 8-800555-55-88) www.samsung.
Contact SAMSUNG worldwide Country/Region THAILAND Customer Care Center 0-2689-3232, 1800-29-3232 1-800-SAMSUNG (726-7864) TRINIDAD & TOBAGO TURKEY TUNISIA U.S.A Country/Region www.samsung.com/ latin/support (Spanish) Customer Care Center 0-800-502-000 www.samsung.com/ th/support www.samsung.com/ latin_en/support (English) URUGUAY UZBEKISTAN www.samsung.com/ tr/support VENEZUELA 80-1000-12 www.samsung.com/ n_africa/support VIETNAM 800-SAMSUNG (800 -726 7864) www.samsung.
Glossary ADF The following glossary helps you get familiar with the product by understanding the terminologies commonly used with printing as well as mentioned in this user’s guide. 802.11 802.11 is a set of standards for wireless local area network (WLAN) communication, developed by the IEEE LAN/MAN Standards Committee (IEEE 802). 802.11b/g/n 802.11b/g/n can share same hardware and use the 2.4 GHz band. 802.11b supports bandwidth up to 11 Mbps, 802.11n supports bandwidth up to 150 Mbps. 802.
Glossary BOOTP Coverage Bootstrap Protocol. A network protocol used by a network client to obtain its IP address automatically. This is usually done in the bootstrap process of computers or operating systems running on them. The BOOTP servers assign the IP address from a pool of addresses to each client. BOOTP enables 'diskless workstation' computers to obtain an IP address prior to loading any advanced operating system. It is the printing term used for a toner usage measurement on printing.
Glossary DHCP DPI A Dynamic Host Configuration Protocol (DHCP) is a client-server networking protocol. A DHCP server provides configuration parameters specific to the DHCP client host requesting, generally, information required by the client host to participate on an IP network. DHCP also provides a mechanism for allocation of IP addresses to client hosts. Dots Per Inch (DPI) is a measurement of resolution that is used for scanning and printing.
Glossary ECM EtherTalk Error Correction Mode (ECM) is an optional transmission mode built into Class 1 fax machines or fax modems. It automatically detects and corrects errors in the fax transmission process that are sometimes caused by telephone line noise. A suite of protocols developed by Apple Computer for computer networking. It was included in the original Mac (1984) and is now deprecated by Apple in favor of TCP/IP networking.
Glossary Gateway IEEE A connection between computer networks, or between a computer network and a telephone line. It is very popular, as it is a computer or a network that allows access to another computer or network. The Institute of Electrical and Electronics Engineers (IEEE) is an international non-profit, professional organization for the advancement of technology related to electricity.
Glossary IPM ITU-T The Images Per Minute (IPM) is a way of measuring the speed of a printer. An IPM rate indicates the number of single-sided sheets a printer can complete within one minute. The International Telecommunication Union is an international organization established to standardize and regulate international radio and telecommunications.
Glossary LDAP MH The Lightweight Directory Access Protocol (LDAP) is a networking protocol for querying and modifying directory services running over TCP/IP. Modified Huffman (MH) is a compression method for decreasing the amount of data that needs to be transmitted between the fax machines to transfer the image recommended by ITU-T T.4. MH is a codebook-based run-length encoding scheme optimized to efficiently compress white space.
Glossary NetWare OSI A network operating system developed by Novell, Inc. It initially used cooperative multitasking to run various services on a PC, and the network protocols were based on the archetypal Xerox XNS stack. Today NetWare supports TCP/IP as well as IPX/SPX. Open Systems Interconnection (OSI) is a model developed by the International Organization for Standardization (ISO) for communications.
Glossary PostScript Protocol PostScript (PS) is a page description language and programming language used primarily in the electronic and desktop publishing areas. - that is run in an interpreter to generate an image. A convention or standard that controls or enables the connection, communication, and data transfer between two computing endpoints. PS Printer Driver See PostScript. A program used to send commands and transfer data from the computer to the printer.
Glossary SMB TCP/IP Server Message Block (SMB) is a network protocol mainly applied to share files, printers, serial ports, and miscellaneous communications between nodes on a network. It also provides an authenticated Inter-process communication mechanism. The Transmission Control Protocol (TCP) and the Internet Protocol (IP); the set of communications protocols that implement the protocol stack on which the Internet and most commercial networks run.
Glossary TWAIN Watermark An industry standard for scanners and software. By using a TWAIN-compliant scanner with a TWAIN-compliant program, a scan can be initiated from within the program. It is an image capture API for Microsoft Windows and Apple Mac operating systems. A watermark is a recognizable image or pattern in paper that appears lighter when viewed by transmitted light.
Glossary WPA-PSK WPA-PSK (WPA Pre-Shared Key) is special mode of WPA for small business or home users. A shared key, or password, is configured in the wireless access point (WAP) and any wireless laptop or desktop devices. WPA-PSK generates a unique key for each session between a wireless client and the associated WAP for more advanced security. WPS The Wi-Fi Protected Setup (WPS) is a standard for establishing a wireless home network.
Index A F accessing favorites settings, for printing management tools 179 AirPrint 153 AnyWeb Print 181 loading features print media feature front view C G cleaning general icons paper in manual feeder/multi-purpose tray 29 40 4 74 special media 31 local 16 driver installation 21, 23 M 9 Mac inside 54 glossary 223 common Mac problems outside 54 google cloud printing 154 pickup roller 56 driver installation for network connected 113, 98, 99 cleaning a machine 54 J co
Index UNIX Windows installing environment IPv6 configuration SetIP program wireless network setup 115 110 output support 74 UNIX preprinted paper 35 problems 81, 103 special media 31 107 transparency 33 104, 105, 106, 141 118 n-up printing Mac printer preferences Linux 175 printer status 172 general information Printing O 189 37 Mac 172 print 168 samsung printer experience 191 multiple pages on one sheet of paper 172 Mac Samsung Printer Status 189 service contact numbers 215
Index replacing toner cartridge 50 SyncThru Web Service general information system requirements 80 USB cable 183 driver installation network cable toner button 18 toner cartridge 40, 173 W watermark estimated life 47 create 166 handling instructions 46 delete 166 non-Samsung and refilled 46 edit 166 redistributing toner 48, 50 Windows 46 common Windows problems adjusting the width and length 26 driver installation for network connected 110, 21, 23 changing the tray size 26
