SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 1 SR-L36... SR-L39...
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 1 FEATURES These operating instructions cover various models. The characteristics of your appliance may differ slightly from those described in this manual. Environment-friendly fridge/freezer using R600a refrigerant and cyclopentane blowing agent. • This products protects the environment by using the R600a refrigerant and the cyclopentane blowing agent.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 2 WARNINGS / SAFETY PRECAUTIONS To avoid any risk of personal injury, material damage or incorrect use of the appliance, be sure to observe the following safety precautions. (After reading these owner’s instructions, please keep them in a safe place for reference). Remember to hand them over to any subsequent owner. Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 3 Do not touch any containers and food in the freezer with wet hands. • It may cause frostbite. Warning • Keep ventilation openings in the appliance enclosure or mounting structure clear of obstruction. • Do not use mechanical devices or any other means to accelerate the defrosting process, other than those recommended by the manufacturer. • Do not damage the refrigerant circuit.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 4 INSTALLING THE FRIDGE/FREEZER 1 Allow an adequate space and install the fridge/freezer on a firm, level floor. • If the appliance is not level, there may be unusual noises and poor cooling. • Wait for at least one hour before plugging the appliance in. 2 3 Clean the fridge/freezer. • Wipe and clean the appliance inside and outside with a damp cloth. 4 Place the food in the fridge/freezer.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 5 PREPARING THE FRIDGE/FREEZER To prepare your appliance for use and check that it is running correctly, take the following steps. 1 2 Install all shelves and compartments removed during transport in the correct positions. 3 4 The interior light should accumulated during come on when you open the refrigerator. 5 Store food once the temperature in the refrigerator is sufficiently low.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 6 B. Model with Digital Display 1 2 3 POWER SUPER FRE.TEMP. Super ECO R F ➀ ➁ VAC 4 5 6 REF.TEMP. ECO VAC ˚C ➂ ➃ ➄ ➅ 1 POWER Button • Main power on/off switch. • Switches the appliance completely on or off. 2 SUPER Button • Switches the fast freeze function on or off. • Use when you wish to freeze foods quickly. • The SUPER indicator ➀ remains on while the fast freeze function is running.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 7 4 REF.TEMP Button • To change the refrigerator temperature: – Press the REF.TEMP button. The current setting temperature is displayed (➃) preceded by “R” (➁). – Press the REF.TEMP button one or more times or hold it down until the required temperature is displayed (➃). – When you complete the setting of refrigerator temperature, the refrigerator temperature display (➃) flashes 5 times and returns to the setting temperature of the freezer.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 8 STORING FOOD IN THE REFRIGERATOR OR FREEZER When storing food in the appliance, follow the recommendations below. • Allow warm food and beverages to cool down before storing them in the appliance. • Ensure that food is well-wrapped or covered before it is stored. This will prevent food from dehydrating, deteriorating in colour or losing in taste and will help maintain freshness. It will also prevent cross-flavouring.
SR-L39-ENG(NEW) 3/30/59 9:37 AM Page 9 B. Freezer Upper freezer drawer • Store packed frozen foods, like ice cream and bacon. ICE ICE Bacon Bacon Middle/lower freezer drawer • Store fresh meat and fish or dried foods, which are divided into suitably sized portions. Wrapping food Note Pack the food in suitably sized portions for your household. Vegetable and fruit portions should be no heavier than 1 kg, while meat portions can be up to 2.5 kg.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 10 MAKING ICE A. Twist type 1 Pull out the ice cube maker. 2 Pour water in up to the water level mark (arrow). 3 Put the ice cube maker back in position. 4 Close the freezer door. B. Normal type 1 Pour water into the ice cube maker. • Fill the maker up to about 80% with water. 2 Place the ice cube maker in the upper freezer drawer. 3 To take out the ice cubes: • Twist the ice cube maker slightly.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 11 USING THE WATER DISPENSER (OPTION) With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In addition, you can save electricity by reducing the number of times the door is opened by more than 30%. Overview Push lever Locking device Water tank cap Water tank Water supply device INSTALLING THE WATER TANK 1 Fix the water supply device tightly into the fixing hole.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 12 3 Check that the locking device is set to “OPEN”. • Water is only dispensed if the device is set to “OPEN”. OPEN LOOK OPEN 4 LOCK Place a cup on the cup support, then press the PUSH lever. INSTALLING A REGULAR BOTTLE 1 Press the fixing lever, lift the exclusive water tank upwards, then remove it.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 13 REMOVING AND CLEANING THE ACCESSORIES Before cleaning the appliance, you must always switch it off and unplug it from the wall socket. Do not use a steam cleaner. The hot steam could damage the surface of the appliance or the electrical components, causing a risk of electric shock. 1 Ice cube maker (optional) • Place a hand in the lower groove, then pull the ice cube maker forward. • Remove the ice cube maker and rinse it in water.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 14 CLEANING THE WATER DISPENSER Cup Support / Dispenser Tray 1 Cup support/Dispenser tray Press “PUSH” behind the cup support slightly, then remove the cup support. 2 Using the dispenser tray handle, remove the tray. 3 Empty the water in the dispenser tray, then clean it using warm water and detergent. Dispenser tray Cup support Connection path Wipe out the connection path and surrounding area with a clean damp cloth.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 15 REPLACING THE INTERIOR LIGHT Always unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger of electric shock. 1 Remove the cover by rotating the + mark with a screwdriver. • Fluorescent light 2 - Fluorescent light • Remove the interior light by pulling it downward, then replace it with a new one. - Incandescent light • Turn the interior light to pull it out and replace it with a new one.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 16 You can hear a liquid babbling in the appliance • This is the refrigerant, which cools the inside of the appliance. There is a bad smell inside the appliance • You did not seal the food. • If there is a bad smell, clean the bio-deodorizer. • Store foods covered and clean the cold inlet. There is a layer of frost on the appliance’s walls • Is the air outlet on the appliance plugged in? • Space the food out as much as possible to improve ventilation.
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 17 VIEW OF YOUR FRIDGE / FREEZER REFRIGERATOR LIGHT (fluorescent or incandescent, depending on the model) Power Super Freezer temp Super ECO R F VAC Fridge temp ECO DAIRY GUARD VAC ˚C REFRIGERATOR REFRIGERATOR SHELVES (tempered glass, crystal or wire, depending on the model) MULTI-PURPOSE GUARD CAN HOLDER (OPTION) FRESH SALAD DRAWER BOTTLE GUARD WATER DISPENSER (OPTION) TWIST ICE MAKER AND ICE STORAGE BIN (OPTION) FREEZER FREEZER DRAWER 17
SR-L39-ENG(NEW) 3/30/59 9:38 AM Page 18 Ambient Room Temperature Limits This fridge/freezer is designed to operate in ambient temperatures specified by its temperature class marked on the rating plate.
