User Manual

3
of the rate of absorption of RF energy by the
human body expressed in units of watts per
kilogram (W/kg). The FCC requires wireless
devices to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg).
The FCC SAR limit incorporates a substantial
margin of safety to give additional protection
to the public and to account for any variations
in measurements.
SAR tests are conducted using standard
operating positions accepted by the FCC with
the device transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of
the device while operating can be well below
the maximum reported value. This is because
the device is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general, the
closer you are to a wireless base station
antenna, the lower the power output of the
device.
Before a new model device is available for sale
to the public, it must be tested and certified to
the FCC that it does not exceed the SAR limit
established by the FCC. Tests for each model
phone are performed in positions and locations
(e.g. at the ear and worn on the body) as
required by the FCC. For body-worn operation,
this device has been tested and meets FCC RF
exposure guidelines when used with an
accessory that contains no metal and that
positions the mobile device a minimum of