User's Manual

Changing Your Settings 293
To activate Air Command:
With the Air command feature active, the Air Command
button toolbar appears once you remove the S Pen from its
slot. This toolbar allows you to quickly activate frequently
used applications or actions.
1. From the main
Settings page, tap Controls tab.
2. In a single motion touch and slide the
Air command
slider to the right to turn it on.
To activate Motion:
1. From the main Settings page, tap Controls tab.
2. In a single motion touch and slide the
Motions slider to
the right to turn it on.
3. Read the on-screen notification and tap
OK .
Note: At least one feature must be activated before Motion can
be activated.
4. In a single motion, slide a feature’s activation slider to
the on position.
The following is a description some of the most commonly
used gestures:
• Direct call : Once enabled, the device will dial the currently
displayed on-screen Contact entry as soon as you place the
device to your ear.
• Smart alert : Once enabled, pickup the device to be alerted and
notified of you have missed any calls or messages.
• Zoom : Once enabled, you must be on a screen where content can
be zoomed. In a single motion, touch and hold two points on the
display then tilt the device back and forth to zoom in or out.