User Manual

Using the 360 Round
28
4
Click next to and select the recording format.
•
RAW SLS : You can record 3D videos in Source view mode and also record original
videos that are not stitched.
•
Stitched MP4 : You can record 2D or 3D videos in Panoramic view mode.
A memory card must be inserted into the 360 Round to record videos.
5
Click next to and select Settings .
6
Click Stitched recording when the settings screen appears, enter information, and select
OK .
7
Click to record a video.
The preview screen will appear on the computer and
Recording will appear on the status
screen of your camera. The camera indicator light will blink red.
8
Click to finish recording video.
Camera status light will turn off.
•
The 360 Round stops recording video or turns off automatically if the temperature
rises above a certain level when it has been used for extended periods. In this case,
turn the 360 Round off and wait until it has cooled.
•
The 360 Round has been developed for content production and can not be
used for security such as CCTV. Do not use it outdoors for more than 12 hours
continuously. Doing so may affect the life and performance of the 360 Round and
may cause errors when recording videos.
•
When connecting to a computer, the keys on the 360 Round will not work.
•
To change the storage location, click Device tab
→
Storage
→
PC or Camera on
the control panel. When
Camera is selected as the storage location, it changes to
Panoramic view mode.
•
A slight difference in time may occur between the actual subject movement and
the subject movement on the preview screen.