User Manual

Using the 360 Round
31
Setting 2D or 3D mode
You can select which camera to use when you are recording video.
1
Launch the 360 Round program on your computer.
2
Click the L-R Camera button to select the camera to be used for recording. Refer to
Checking the location of each camera for the detailed location of cameras on the right or
left side of the 360 Round.
•
On Panoramic view, Stretched view, 360˚ view or Round view mode:
–
: You can record 2D video using the 8 cameras on the right side, and the
camera on the top of the 360 Round.
–
: You can record 2D video using the 8 cameras on the left side, and the
camera on the top of the 360 Round.
–
: You can record 3D video with all of the 17 cameras on the 360 Round.
–
: All cameras are turned off and the preview screen is disabled.
•
On Source view mode:
–
: You can record 3D video with all of the 17 cameras on the 360 Round.
–
: All cameras are turned off and the preview screen is disabled.
Rotating the preview screen
You can record and view videos by rotating the preview screen up and down in 180 degrees.
Click
to rotate the preview screen.
Adjusting the volume of recording audio
You can adjust the volume of the audio to be recorded.
Click
to adjust the volume.
If you set the volume excessively high when recording video in a high surrounding
environment, the audio may be distorted. Launch the
360 Round program and click
the
Audio tab and set Mic . Level - Internal to Auto or Manual to turn down the
volume.