User manual

Gear Fit Manager
50
•
GENERAL NOTIFICATIONS : Set applications to be notified on the Gear Fit.
Settings
Use this application to configure Gear Fit Manager and set various options.
On the Gear Fit Manager screen, tap Settings .
Setting the Power button
Set actions to be performed when you press the Gear Fit’s Power button twice.
On the Settings screen, tap Double pressing power key , and then select an option.
Activating the auto lock feature
Set the mobile device to lock automatically when it is disconnected from your Gear.
On the Settings screen, tick Auto lock.
Tap Continue , draw a pattern by connecting four or more dots, and then draw the pattern
again to verify it. When the Gear Fit is disconnected from the mobile device, you must draw
the pattern to unlock the mobile device screen.
The mobile device’s screen is automatically unlocked when the Gear Fit is connected to the
mobile device.
Some mobile devices do not support this feature.
Setting a wake-up gesture
Set the Gear Fit to recognize your gesture to wake up the Gear Fit and show the clock or the
last page you accessed when the screen is turned off.
On the Settings screen, tap Wake-up gesture , and then drag the Wake-up gesture switch to
the right. To select a preset screen to be shown when the screen turns on, tap Select screen
shown .
To wake up the Gear Fit, raise the hand that is wearing the Gear Fit and look at the Gear Fit’s
screen for a few seconds. The screen turns on and a preset screen is displayed.