User Manual (T-Mobile Wireless SM-V100T (LTE Mobile HotSpot PRO) English User Manual) (ver.MI1_F6_AC)
Table Of Contents
- Samsung LTE Mobile HotSpot Pro
- Section 1: Getting Started
- Section 2: Understanding Your Device
- Section 3: Connecting Your Device
- System Requirements
- Before You Begin a Connection
- Initial Connection to Your Device
- Accessing Your HotSpot via a Browser
- Configuring Your HotSpot
- Preparing your HotSpot for File Access
- Installing the USB drivers for various OS types
- Connecting your Computer to the HotSpot via USB
- Factory Reset via the Web Portal
- Using the Battery Pack Feature
- Section 4: Home Page
- Section 5: Network Page
- Section 6: Securing Your Device
- Section 7: Configuring Your Device
- Section 8: Messaging on Your Device
- Section 9: Troubleshooting
- Section 10: Health and Safety Information
- Exposure to Radio Frequency (RF) Signals
- Specific Absorption Rate (SAR) Certification Information
- FCC Part 15 Information to User
- Radio Frequency (RF) Energy
- Knowing Radio Frequency Safety
- FCC Radio Frequency Emission
- Samsung Mobile Products and Recycling
- UL Certified Travel Charger
- Display / Touch-Screen
- Battery Use and Safety
- Care and Maintenance
- Operating Environment
- Restricting Children's Access to Your Wireless Mobile Device
- FCC Notice and Cautions
- Other Important Safety Information
- Section 11: Warranty Information
- Index
mini USB Cable
Open USB port
3. Confirm the external device is charging.
Using the Battery Pack Feature
The HotSpot can also be used to charge external devices via
either the mini USB connector or via the USB port.
Charging an external device via the USB port:
1. Remove the USB connector from the side of the device
(1). Make sure to lea ve the mini usb connector plugged
in (2).
Charging a external device by using the mini USB connector:
1. Carefully remove the mini USB connector from the side
of th
e device.
2. Carefully insert the mini USB connector into the
a
vailable travel adapter/Power jack on a compatible
device.
2. Insert an external USB cable into the open USB port on
the HotSpot
3. Plug the other end of the USB cable into the external
device’s power port.
4. Confirm the external device is charging.
Connecting Your Device 23