User Manual (T-Mobile Wireless SM-V100T (LTE Mobile HotSpot PRO) English User Manual) (ver.MI1_F6_AC)
Table Of Contents
- Samsung LTE Mobile HotSpot Pro
- Section 1: Getting Started
- Section 2: Understanding Your Device
- Section 3: Connecting Your Device
- System Requirements
- Before You Begin a Connection
- Initial Connection to Your Device
- Accessing Your HotSpot via a Browser
- Configuring Your HotSpot
- Preparing your HotSpot for File Access
- Installing the USB drivers for various OS types
- Connecting your Computer to the HotSpot via USB
- Factory Reset via the Web Portal
- Using the Battery Pack Feature
- Section 4: Home Page
- Section 5: Network Page
- Section 6: Securing Your Device
- Section 7: Configuring Your Device
- Section 8: Messaging on Your Device
- Section 9: Troubleshooting
- Section 10: Health and Safety Information
- Exposure to Radio Frequency (RF) Signals
- Specific Absorption Rate (SAR) Certification Information
- FCC Part 15 Information to User
- Radio Frequency (RF) Energy
- Knowing Radio Frequency Safety
- FCC Radio Frequency Emission
- Samsung Mobile Products and Recycling
- UL Certified Travel Charger
- Display / Touch-Screen
- Battery Use and Safety
- Care and Maintenance
- Operating Environment
- Restricting Children's Access to Your Wireless Mobile Device
- FCC Notice and Cautions
- Other Important Safety Information
- Section 11: Warranty Information
- Index
How do I reset the device back to Factory Default via the
Hardware?
•
Press and hold Power and WPS keys for 5 seconds to display an
on-screen Factory Reset message.
•
Press the Power key to reset the device. Once completed, the
power should recycle and the main screen will re-appear.
What is the password for the Web Portal?
•
The default password is “admin” (all lowercase letters).
•
After changing this password in the Web portal you will need to
reset the device before regaining access.
I can’t see my HotSpot in my list of available wireless devices.
How do I make it visible again?
•
Access the Web portal and select Network.
•
Tap the Broadcast SSID checkbox and place a checkmark in the
adjacent field.
•
Select
Apply
OK
.
•
On your target device, refresh your list of available WAPs and
connect.
The device is on but I have no Internet connectivity?
The Hibernate mode is used for power management and by
default is turned on. The default is inactivity for 30 minutes.
When Hibernate mode is activated - All radios are turned off
(Wi-Fi and Cellular Network).
Note:
LCD turns off after 30 seconds (standby default).
•
If you believe your are in Hibernate mode or you have had not
Internet activity for a while:
•
Press
Power
key , the LCD and both radios will turn on
and all network communication icons will re-appear.
I think I see the Hibernate icon on the screen, what do I do?
•
If you see the Hibernate icon
( ) on the screen you must:
•
Confirm the on-screen message indicates you are in Hibernate
mode.
•
Press the
WPS
key to then disable the Hibernate mode and
reactivate all radios.
Troubleshooting 45