Tus neeg siv phau ntawv

Setup

Make sure the Multipurpose Sensor

is within 15 feet (4.5 meters) of your

SmartThings Hub or SmartThings

Wiﬁ (or compatible device with

SmartThings Hub functionality)

during setup.

Multipurpose Sensor

Remove the tab on the Multipurpose

Sensor marked “Remove When

Connecting” and follow the

on-screen instructions in the

SmartThings app to complete setup.

Use the SmartThings mobile app to

select the “Add device” card and

then select the “Multipurpose sensor”

category.

PAGE 1
Setup Multipurpose Sensor 1. Make sure the Multipurpose Sensor is within 15 feet (4.5 meters) of your SmartThings Hub or SmartThings Wiﬁ (or compatible device with SmartThings Hub functionality) during setup. 2. Use the SmartThings mobile app to select the “Add device” card and then select the “Multipurpose sensor” category. 3. Remove the tab on the Multipurpose Sensor marked “Remove When Connecting” and follow the on-screen instructions in the SmartThings app to complete setup.
PAGE 2
Placement Troubleshooting The Multipurpose Sensor can monitor whether doors, windows, and cabinets are open or closed. 1. Hold the “Connect” button with a paperclip or similar tool for 5 seconds, and release it when the LED starts blinking red. 2. Use the SmartThings mobile app to select “Add device” card and then follow the on-screen instructions to complete setup.