Owner Manual
Table Of Contents
APPENDIX
Problems Solutions
Cleaning is nished but
small dust particles come
out of the brush.
• After cleaning, operate the vacuum for 10 seconds or more on
the MAX setting to suction up the small dust particles.
Vacuum cleaner stops
operation during
cleaning.
• The vacuum cleaner’s motor will shut off to prevent overheating:
– When the vacuum operates with a full dustbin.
– When the vacuum operates with suction part or brush clogged.
– When the Extension Crevice Tool is used for long hours.
• After correcting the cause of the problem, turn the product
on again. (This case may differ depending on the ambient
temperature.)
Static electricity occurs
when cleaning a thick
and soft mat.
• Some types of mats such as a (childcare center mat or a noise
prevention mat for between oors, etc.) may cause static
electricity.
– Move the brush on a normal oor for a while and clean again.
This should get rid of the static electricity.
English 31
1_VS7000_EN_00837J-01_AA_only.indd 31 2020-05-05 오후 8:23:45