Contact Samsung Electronics U.K. If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Tel : 0330 SAMSUNG (0330 7267864) Web : www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
SAFETY CONCERNS The purpose of the Safety Concerns section is to ensure the safety of users and prevent property damage. Please read this document carefully for proper use. Conventions Warning Provides information or instructions that you should follow in order to avoid personal injury or fatality. Caution Provides information or instructions that you should follow in order to avoid a service failure or damage to your Set Top Box (STB). Note Indicates additional information for reference.
Warning WARNING Power Insert the power plug firmly. Do not connect multiple devices to a single outlet simultaneously. Do not touch the main body, power cable, or power plug with wet hands. If video/audio cable generates heat after connection, pull out the power plug and contact customer service immediately. Installation/Maintenance Install the product in an area with good ventilation. Do not cover the top. Do not install in humid or dusty areas, and avoid installing near heating devices.
Warning CAUTION Power Connect your TV to the Set Top Box (STB) after powering off the TV and the STB by pulling out the power plugs. Before connecting the power source, a permanent protective earth connection to the cable distribution should be made. The socket outlet should be installed near the equipment and easily accessible. Installation/Maintenance Install the product correctly complying with the instructions in the user guide.
TABLE OF CONTENTS SAFETY CONCERNS 1 Conventions ............................................................................1 Symbols ...................................................................................1 WARNING ................................................................................2 CAUTION .................................................................................3 BEFORE USE 6 freesat+ HD digital TV recorder .............................................6 Key Functions .
HOW TO USE THE PRODUCT 25 Installation Wizard ............................................................... 25 Using the Basic Functions .................................................. 29 Using the Main Functions ................................................... 32 Main Menu............................................................................ 34 Guide.............................................................................................35 Channel .......................................
BEFORE USE freesat+ HD digital TV recorder freesat+ HD digital TV recorder (SMT-S7800) provides high quality video and audio broadcasting and interactive services. Key Functions HD Video Display (High Definition) Supports high-resolution video output of up to 1080p, enabling you to enjoy clear and sharp video. Electronic Program guide (EPG) Using the EPG, you can check the programme information and broadcasting schedule of a desired channel, and schedule the programmes to watch.
Package Contents Please make sure the following items are contained in your product package box.
Names and Functions This section describes the name and function of the parts. Touch Pad and Front Panel This section describes the touch pad and front panel. Name Power Description Change the STB state to standby or active mode. - Active Mode : The STB is in operation mode and you can get broadcasting. - Low Power Standby Mode : The STB stops running, all the services are suspended except Blue LED. (No Front Display, No TV Service, No Cooling FAN) Menu Display the main menu.
When you press the STANDBY button ( ) whilst the STB is in Active Mode, the STB will switch to Active Standby Mode. After a period of 5 minutes, the STB will switch to Low Power Standby Mode. During normal operation every day, the STB will switch momentarily from Low Power Standby Mode to Upgrade Mode for a moment. In this mode, the STB will automatically check for upgrades that are being broadcasted.
Rear Panel This section describes the names and functions of the ports on the rear panel. Name Description SAT IN1 / SAT IN2 A port which connects an LNB to an STB with a coaxial cable. ETHERNET A LAN port which connects a LAN cable. USB A port which is connected to a USB storage device. TV SCART A TV SCART output port which is connected to a TV with a SCART cable. VCR SCART A VCR SCART output port which is connected to a VCR with a SCART cable.
Remote Control This section describes the function of each button on the remote control.
Loading batteries in the Remote Control Alkaline batteries, not standard batteries, should be used for the remote control to ensure longer use. If you use standard batteries, it may cause problems in operating the remote control. - Two identical and new batteries should be used for the remote control. - When the remote control is not used for a long time, remove the batteries. TV Operation Setting with a Remote Control You can operate the TV with a remote control.
Entering TV Manufacturer Number 1 Check the ‘TV manufacturer number’ in the ‘Annex’ to see the relevant 3digit TV manufacturers number, and turn on the TV. (See page 63). 2 Press and hold the TV button ( ) for more than 5 seconds until the LED on the remote control blinks. 3 Enter the 3-digit number, and then the LED will blink. 4 If the TV turns off, press and release the OK button ( - If you get no response, try the automatic code search in the previous page.
INSTALLATION This section describes how to install the STB (SMT-S7800). Installation Environment The table below shows the installation environment for the STB. Item Description Operating Temperature 0-40°C Operating Humidity 20–80% (40°C) Rated Voltage, Frequency AC 230 V +/- 15%, 50 Hz Rated Power Consumption Max. 40 W Broadcasting Rx Frequency 950 ~ 2150 MHz channel 8Mhz When Using and Installing the Product: The product must be used under the specified environment.
Peripheral Device Connection This section describes how to connect cables and peripheral devices to the STB. Typical device connections are shown in the following figure. (The product image may differ from the actual product.) You need two cables for a freesat+ installation so that you can watch one channel and record another. You also need a satellite dish with a multiple LNB (which is the protruding antenna of the dish).
Connection to a TV with an HDMI Port This section describes how to connect the STB to a TV with an HDMI port. Connect the HDMI port on the rear of the STB to the HDMI port of the TV by using a standard HDMI® cable. High Definition Multimedia Interface (HDMI) The SMT-S7800 incorporates HDMI® technology. The HDMI port is a video-audio integrated port to provide high-definition images by connecting an STB to a HD TV. Connect it to the HDMI port on a HD TV. 16_ © SAMSUNG Electronics Co., Ltd.
Connection to a TV with a SCART Port This section describes how to connect the STB to a TV with a SCART port. Connect the TV SCART port on the rear of the STB to the SCART port of the TV by using a SCART cable.
Connection to a VCR with a SCART Port This section describes how to connect a VCR to a STB with a SCART cable. Connect the VCR SCART port of the STB to the SCART port of the VCR by using a SCART cable. When Connecting to a VCR: When connecting to a VCR, power off both the VCR and the STB and pull out both power plugs before connecting. You can also do the connection by referring to the VCR's User Manual. - VCR may not record programmes including anti-record signals properly. 18_ © SAMSUNG Electronics Co.
Connection to a TV/VCR with a Composite Port This section describes how to connect the STB to either a TV or VCR with a Composite (VIDEO/AUDIO OUT) port. Video Connection Using a video cable, connect the VIDEO OUT port on the rear panel of the STB to the VIDEO IN port of the TV/VCR. Audio Connection Using an audio cable, connect the AUDIO OUT (L/R) ports on the rear panel of the STB to the AUDIO IN (L/R) ports of the TV/VCR. Be sure to match audio ports with plugs of the same colour.
Connection to a Digital Audio Receiver or Amplifier This section describes how to connect a digital audio amplifier or home theatre system that has a Dolby Digital decoding function. Using an optical cable for digital audio, connect the DIGITAL AUDIO OUT port at the rear of the body to the DIGITAL AUDIO IN (SPDIF) port of a Dolby Digital audio receiver or amplifier.
Connection to an Audio Receiver or Amplifier This section describes how to connect an audio receiver or amplifier. Using the audio cable, connect the AUDIO port at the rear of the STB to the AUDIO port of an audio receiver or amplifier.
Connection to Satellite Dish The freesat service requires a satellite dish. Existing dishes may be suitable, (see http://www.freesat.co.uk for more information). If you do not have a satellite dish installed, please ask your dealer to recommend a local dish installation engineer. Connect two coaxial cables from the LNBs both to SAT IN 1 and SAT IN 2 on the back of your receiver. All cable connectors should only be tightened with your fingers; do not use any kind of wrench to tighten the connectors.
Network Connection This section describes how to connect a residential gateway. Connect the ETHERNET port on the rear panel of the STB with the residential gateway using an Ethernet cable. Ethernet cable A shielded Ethernet cable is recommended.
USB Connection This section describes how to connect a USB storage device. Connect the USB storage device containing photos, music and/or movie files to the USB port at the front/rear of the product. The External HDD device is not supported. The USB HUB is not supported. 24_ © SAMSUNG Electronics Co., Ltd.
HOW TO USE THE PRODUCT Installation Wizard Before you can view the television programmes, you must run the installation wizard that starts when the Set Top Box (STB) is first powered up. Step 1 When the product is connected to the TV for the first time the product will display the initial User Settings screen. User Settings allows you to set the language, screen ratio, display format and resolution. Press the Navigation Left/Right buttons ( / ) to choose the options.
Step 2 Check the cables are connected. If the cables are connected correctly, the signal strength will be displayed. ) on the remote control. Select the [Next] button and press the OK button ( Step 3 Enter your full postcode using the numeric buttons on the remote control. To use the on screen keyboard press the Green button on the remote control. Select the [Next] button and press the OK button ( ) after entering your postcode. Space is required between the first and second part of your post code.
Step 4 You will see a summary screen after set-up is complete. Select the [Finish] button and press the OK button ( ) to complete the installation. Step 5 The STB will carry out a channel scan in order to find all the freesat channels.
Step 6 After successful scanning, a results screen will be shown indicating the numbers of TV and radio channels found. Select the [Save] button and press the OK button ( ) to confirm. Final The STB software will be updated if a new software is available. 28_ © SAMSUNG Electronics Co., Ltd.
Using the Basic Functions Display icons Icon Definition Icon Definition Favourite channel AAC+ sound Lock channel Dolby Digital Sound HD channel Dolby Digital Plus Sound HD simulcast Audio description Paid channel DVB Subtitle Parental Lock Digital text Watch timer Protected library Series record timer New recording Record Timer 4:3 Screen Ratio Subtitle available 14:9 Screen Ratio Audio stereo 16:9 Screen Ratio Audio mono Guidence AAC sound Recording in progress English _29
Service Information Changing to another screen or pressing the INFO button ( information on the screen. ) displays channel - You can see the details of a programme, time etc. Information Banner You can see the information banner by pressing the INFO button ( watching a programme.
Channel List / Favourite Channel Pressing the OK button ( screen. ) on the remote control displays the channel list on the - Pressing the Yellow button allows you to set a favourite channel. Guide You can see the Electronic Programme Guide (EPG) for all channels. ) on the remote control whilst watching a programme Press the GUIDE button ( and select the channel genre. To see the programme information, follow the below steps 1.
Using the Main Functions Time shifting The STB automatically saves the previous minutes of the channel being watched or the radio channel being listened to. (Maximum 120 minutes) This time shifting mode makes it possible to stop live mode, rewind and review a programme that was recorded moments before. ). To pause a programme, press the Pause button ( ) or Pause button ( To resume the current programme, press the Play ( ).
Video Recording To record TV channels and Radio channels, press the Record button ( ). You can record a programme not only whilst watching the desired programme, but also after selecting the desired programme from the information banner, the TV guide or the Search menu. - You can simultaneously record 2 programmes. - Programmes to be recorded display a red icon in the information banner and the channel ist.
Main Menu If you press the MENU button ( screen is displayed as follows: ) whilst watching the live TV, the main menu Main Menu Guide/ Channel / Library/Media/ Samsung WebTV / Settings - Select a desired item by using the Left/Right button. ( - When a desired menu is found, press the OK button ( , ). ) to move to the selected menu screen. Before Using the Product The information contained in this chapter may be subject to change by a programme provider without prior written notice.
Guide Channel Genre ‘Channel Genre’ allows you to view channels by genre. (e.g. News & Sports, Entertainment, Music, Radio, etc) To use ‘Channel Genre’, follow these steps: 1. Press the MENU button ( remote control. ) on the 2. Select the [Guide] category and press the OK button ( ) on the remote control. Or 1. Press the GUIDE button ( ) on the remote control. You can see the Electronic Programme Guide (EPG) for all channels, which displays the programme list per channel, programme details, etc.
Guide (continued) You can search by text. ). - Select the Search Text option, press the OK button ( - Using the Left/Right/Up/Down buttons ( , , , ) input the search text. ). - Confirm using the OK button ( Select a channel programme using the Navigation buttons and then press the OK ) to watch the channel in a small screen.
Channel Channel You can see the pop-up window of the channel list. - Pressing the OK button ( ) on the remote control displays the channel list on the screen. - Pressing the Left/Right buttons ( , ) allows you to navigate between channel lists (All Channels, Entertainment, News & Sport, FAV, etc) - Pressing the Yellow button allows you to create a favourite channel list, and the Red button to lock/unlock the current channel. ). Sort by name: Sort channel list by name.
Channel (continued) Favourite Channel Set channels you watch frequently as Favourites. To show all favourite channels, press the Navigation buttons ( ) or ( ) on the channel list. To add a favourite list, follow these steps: 1. Pressing the Yellow button allows you to create a favourite channel. 2. Select [Create new FAV. List]. 3. Confirm with the OK button ( ). 4. Using the Left/Right/Up/Down buttons ( , , , ) input the FAV. name. 5. Confirm using [Save] option. 6.
Library Contents You can see a list of the TV programmes that you have recorded and are recording. - Pressing the INFO button ( ) on the remote control displays the programme information of the selected recording. ) on the - Pressing the OK button ( remote control will playback the selected content. Bookmarks 1. Press the BOOKMARK button ( ) whilst watching a recording. 3. Using the Left/Right buttons ( 4. Press OK button ( , ) whilst watching Main Menu 2.
Library (continued) Tick Modes Mode Remote Control Speed Fast Rewind x1, x2, x4, x8, x16, x32, x64 Fast Forward x1, x2, x4, x8, x16, x32, x64 Slow Rewind x1/2, x1/4, x1/8, x1/25 Slow Forward x1/2, x1/4, x1/8, x1/25 Jump Modes Mode Remote Control Description Jump Backward Jump backward by 15 seconds. Jump Forward Jump forward by 60 seconds. Seek Modes (only when play banner is displayed.) Seek Backward Mode Remote Control Description Time seek backward.
Library (continued) To lock record, follow these steps: 1. Select the programme. (Only one programme at a time.) ) on the remote control. 2. Press the TOOLS button ( 3. Select [Lock] on the tools pop-up window. 4. Enter your PIN code. ). 5. Confirm with the OK button ( To unlock record, follow these steps: 1. Select a locked programme. (Only one programme at a time.) ) on the remote control. 2. Press the TOOLS button ( 3. Select [Unlock] on the tools pop-up window. 4. Enter your PIN code. ). 5.
Library (continued) To select all records, follow these steps: 1. Press the TOOLS button ( 2. Select [Select All]. 3. Press the OK button ( ). ). To deselect all records, follow these steps: 1. Press the TOOLS button ( 2. Select [Deselect All]. ). ). 3. Confirm with the OK button ( Timer You can see the list of the recording programmes and the scheduled recording programmes. To delete a recording programme or a scheduled recording programme, follow these steps: 1.
Library (continued) To select all records, follow these steps: 1. Press the TOOLS button ( ). 2. Select [Select All]. 3. Confirm with the OK button ( ). To deselect all records, follow these steps: 1. Press the TOOLS button ( ). 2. Select [Deselect All]. 3. Confirm with the OK button ( ).
Media Make sure that the USB storage device or network is connected correctly before using the Media Menu. Supporting Only use USB devices that have been formatted with the FAT16/32. The Standard JPEG/MP3/ AVI(XviD) format only is supported. Read, delete, copy and move are supported. - Before connecting your device to the product, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss.
Media (continued) USB You can play contents using a USB storage device. To connect a USB storage device device, follow these steps: 1. Turn on your product. 2. Connect the USB storage device containing photos, music and/or movie files to the USB port at the front/rear of the product. 3. When the USB storage device is connected to the product, you can see the USB directory on the Media screen. HDD You can play contents from an HDD. - When the HDD is ready, you can see HDD directory on the Media screen.
Media (continued) Photo / Music / Video / All Photo category You can see a thumbnail of image files. When you select an image file you can see a slideshow. Only standard JPEG files are supported. Music category Only standard MP3 files are supported. Video category Only standard XviD files are supported. All category You can see all files on the available media. You can see additional information by pressing the INFO button on the remote control if a file has additional information.
Media (continued) To create a new folder, follow these steps: 1. Press the TOOLS button ( ). 2. Select [New Folder]. 3. Confirm with the OK button ( ). 4. Input the name of the folder using the Left/Right/Up/Down ( buttons. 5. Confirm with the OK button ( ). , , , ) To sort files, follow these steps: 1. Press the TOOLS button ( 2. Select [Sort]. 3. Press the OK button ( ). 4. Choose sorting mode. 5. Choose sorting order. 6. Confirm with the OK button ( ). ).
Samsung WebTV YouTube™ You can see the YouTube™ Spotlight, Top Rated, Most Viewed, and More contents list and search YouTube™ content. To view further content sign into your YouTube™ account. To do this, you must create a YouTube™ account first. - After sign-in, you can see Uploads, Favourites, Playlists and Subscriptions. 48_ © SAMSUNG Electronics Co., Ltd.
Samsung WebTV (continued) You can use the following features by selecting the TOOLS button ( ). Settings: Set the option 'play next video when current video ends' and 'filter videos that may not be suitable for minors'. Set Geography: You can see videos that include the geographical location you select. After sign-in, - Add to Favourites : add a video to your favourites list. - Add to Subscriptions : add a video to your subscriptions list.
Settings You can set Set Top Box (STB) options. - You can change the options listed below [Channel], [Sound], [Picture], [Language], [Library/Media], [System] - CI Plus (Coming soon) All options are displayed according to the CI manufacturer. Settings Channel Freesat scan You can scan freesat channels. Enter your full postcode using the numeric buttons on the remote control. To use an on-screen keyboard, press the Green button on the remote control.
Settings Channel (continued) Parental rating You can set the Parental rating value. - You can choose one from: Adult Only, Unblocked Adult service You can choose whether to use Adult Services . - Visible - Hidden Parental setting You can choose whether to protect your PIN code or not. Main Menu - Pin code protected - Not protected - The default PIN code is 0000. Service mode You can choose whether to use Freesat mode or not. When recording is in progress you cannot use this functionality.
Settings Sound Dolby Digital / DTS Allows you to enable/disable the Dolby Digital Sound, which is available when the programme provider supports Dolby Digital Sound. - The default setting is Off. Following table is created based on HDMI/SPDIF audio output. Dolby Digital/ DTS On Digital volume control Off Input audio format Output audio format Dolby Digital / Dolby Digital / Dolby Digital Plus Dolby Digital Plus HE AAC DTS Not Available PCM Not Available Other audio formats (e.g.
Settings Sound (continued) Audio primary You can change the language for the Audio primary. - Select the default language for the Audio primary using the Up/Down button ( , ) Audio secondary You can change the language for the Audio secondary, which is available if an Audio secondary service is provided by the programme provider. - Select the default language for the Audio secondary using the Up/Down button ( , ). Main Menu Audio description You can choose whether to use Audio description.
Settings Picture TV screen ratio You can change the TV screen ratio. Allows you to change the screen output ratio. - 4:3 and 16:9 ratios are available. Screen resolution You can change the screen resolution. - Auto, Use TV's feature, 576p, 720p, 1080i, 1080p 50Hz Picture size conversion Allows you to change the screen output type.
Settings Picture (continued) Information banner timeout Allows you to change the display time for the service information that appears at the top of the screen when you change channels or press the INFO button ( ). Screen saver You can set the time delay for the screen saver. - If there is no input from the remote control for a given period of time, the menu window disappears. Enter the required no-input time.
Settings Language OSD Language On Screen Display (OSD) is used to change the language of the menu screen. Automatic subtitles Allows you to enable/disable subtitles. -To enable them, select On. Subtitles primary Allows you to change the primary language for the subtitles. Subtitles secondary Allows you to change the secondary language for the subtitles. - Subtitles are available when a secondary language service is provided by the programme provider. 56_ © SAMSUNG Electronics Co., Ltd.
Settings Library / Media USB auto-open Allows you to automatically open the Media when the USB storage device is connected. Time shift recording Time shift buffer Allows you to set the time shift buffer duration. - 30 minutes, 60 minutes, 120 minutes HDD auto-eraser Allows you to erase the oldest recorded programme from the library automatically. Immediately after the HDD free space goes below 15% (low disk space level), autoeraser starts erasing unprotected recordings.
Settings System Product information Displays information on the product. - You can check the Brand ID, Product ID, Firmware version, Software version, Serial number and Last SW update information. Change PIN code Change PIN Code allows you to change the current password. To change the password use the following steps: 1. Select [Change PIN code] and press the OK button ( ). 2. Enter the current PIN code using the numeric buttons. 3. Enter the New PIN code and enter again in [Confirm new PIN code].
Settings System (continued) Use the Manual IP/DNS configuration when connecting your product to a network that requires a static IP address. To set up the Network manually use the following steps: 1. Connect your product to your LAN. 2. Press the MENU button ( ) on the remote control and select [Settings], [System], [Network setting] 3. Set IP Configuration to [Manual]. 4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values.
Settings System (continued) [USB Update] 1. Insert a USB storage device which has a new software in its root directory. 2. Select [From USB] and select the [Search] button and press the OK button ( remote control. 3. When new software is detected, the software will be updated. 4. The STB will reboot after the upgrade is completed. ) on the You can find USB-upgradable software at the following web site if available : www.samsung.
TROUBLESHOOTING This section describes how to handle the problems that may occur whilst using the STB. If the STB operates abnormally, first check the following: If the problem persists, contact your local service centre. Screen Trouble Nothing appears on the TV screen. Solution 1. Check if the TV and STB are powered on. 2. Check the connection status of the cable between TV and STB. 3. Check if the TV input is set to an external input mode. 4.
General Trouble The TV produces no audio. Solution 1. Check the connection status of the cable between the audio port of the TV/audio system and the AUDIO OUT port at the rear of the STB. 2. If the cable is connected normally, check if the MUTE function is enabled. If the MUTE function is enabled, press the MUTE button ( ) on the remote control to disable it. I cannot remember the password for the STB. The default password for the STB is ‘0000’.
ANNEX TV Manufacturer Numbers The TV manufacturers and associated numbers that can be supported by a remote control are listed in the table below. Manufacturer Setting Numbers Manufacturer Setting Numbers SAMSUNG ASUKA 050 076 123 378 379 A.R.
Manufacturer Setting Numbers Manufacturer Setting Numbers BRITANNIA 379 DENKO 076 BROTHER 076 DENON 126 BRUNS 065 324 DERWENT 105 BSR 094 107 110 139 168 DESMET 049 113 152 BTC 123 DIGATRON 049 BUSH DIGILINE 049 152 BUSH(UK) 018 049 076 094 106 107 123 134 139 142 172 193 195 209 217 225 226 232 307 378 379 457 458 470 480 107 168 DIXI 049 152 195 379 413 CAPSONIC 049 076 152 380 DORIC 104 105 CARREFOUR 018 177 DREAN 049 152 CASCADE 049 064 152 195 DTS 195 CASIO 0
Manufacturer Setting Numbers Manufacturer Setting Numbers FNR 045 HEMA 195 379 FORMENTI 049 090 107 113 139 307 324 379 407 467 469 480 481 050 104 113 307 HEMMERMANN 150 470 HIFIVOX 074 182 186 424 453 463 190 324 HIGASHI 050 FRABA 049 152 421 HIGHLINE 049 076 152 FRIAC 045 049 152 195 HIKONA 123 FRONTECH 066 076 139 195 307 379 413 466 470 477 HINARI FUJITSU 042 045 071 102 107 195 236 379 HISAWA 012 018 042 049 066 094 107 123 134 139 195 209 232 307 123 378 380 425 FUJITS
Manufacturer Setting Numbers Manufacturer Setting Numbers KAISUI 049 050 123 152 195 378 379 380 MAGNAFON 045 046 050 068 090 120 379 407 481 KAMOSONIC 050 MAGNAVOX 018 042 049 152 KAMP 379 MAGNUM 440 441 443 444 KAPSCH 071 107 172 236 466 MANDOR 076 KARCHER MANESTH 076 094 113 134 141 152 379 467 KATHREIN 020 045 049 050 068 076 107 152 195 217 378 421 435 455 MANHATTAN 049 195 KAWASHO 379 MARANTZ 049 152 455 KB ARISTOCRAT 107 MARELLI 324 KENDO 045 049 055 134 152 172 21
Manufacturer Setting Numbers Manufacturer NECKERMANN 011 049 050 065 107 139 152 163 210 247 249 307 324 357 379 413 421 455 470 481 152 PATHE CINEMA (F) 050 168 PATHE MARCONI 014 074 182 186 424 453 462 463 195 NEDIATOR Setting Numbers NEI 049 125 152 225 477 PAUSA NESCO 042 413 PAUZA 195 NETSAT 049 152 PERDIO 049 102 107 113 152 467 NETWORK 213 PERFEKT 049 152 NEUFUNK 049 152 195 435 PERSHIN 425 NEW TECH 049 050 152 182 195 379 PHILCO 011 016 049 065 090 093 094 104 107 12
Manufacturer Setting Numbers Manufacturer Setting Numbers RECOR 049 152 SIERA 050 065 079 112 152 160 RECTILIGNE 049 152 SIERRA 049 112 152 REDIFFUSION 018 059 104 105 139 171 172 307 471 475 SIESTA 421 REDIFFUSION (UK) REDSTAR 150 162 SILVA 049 152 379 049 152 SILVER 018 042 049 076 152 172 REFLEX 049 152 SINGER 045 049 065 104 152 195 324 369 413 425 REOC 460 SINUDYNE REVOX 049 152 421 SKANTIC 012 045 065 094 104 107 134 139 150 152 172 210 216 236 324 357 366 367 469 470
Manufacturer Setting Numbers Manufacturer TEAC ULTRA Setting Numbers 409 ULTRAVOX 045 049 050 065 104 107 139 152 226 324 379 413 471 049 152 TECH LINE 049 076 152 163 195 217 378 380 426 457 458 470 040 050 064 168 195 213 218 243 379 413 480 049 152 195 TECHICA 123 UNITED 49 152 TECHNEMA 113 467 UNIVERSUM 011 012 018 020 049 074 076 094 107 131 152 163 172 195 197 210 213 247 320 345 346 357 375 379 407 408 413 421 428 429 437 454 470 480 049 107 152 213 324 411 TEC UNIC LINE TECHNICS
Product Specifications Design and specifications are subject to change without prior notice. Item Description Model Name SMT-S7800 Receiver DVB-S/S2 Input Connector Type F-Type IEC female in accordance with IEC 169-24 Input Impedance 75 Ω Broadcasting Rx Frequency 950 ~ 2150 MHz Broadcasting Rx Level -25 ~ -65 dBm (average power) -25 ~ -65 dBm (average power) Vertical : +13.3V(+14.3V at high voltage) LNB Power & Polarization Horizontal : +18.3V(+19.
Dolby Logo Usage Approval Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DVB Product Notice DVB and the DVB logos are trademarks of the DVB Project. HDMI Product Notice HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ACCESS Product Notice This product contains NetFront Living Connect of ACCESS CO., LTD.
Open Source Announcement Some software components of this product incorporate source code covered under the GNU General Public License (GPL), the GNU Lesser General Public License (LGPL) etc. Acknowledgement: The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to: vdswmanager@samsung.com or oss.request@samsung.
everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents.
4) 5) 6) 7) 8) 9) 10) of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.
NO WARRANTY 11) BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
4) You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
Library, and explaining where to find the accompanying uncombined form of the same work. 8) You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change.
The MIT License Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be
FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
you understand and accept all the terms of this license. 4. Contacts There are two mailing lists related to FreeType: o freetype@nongnu.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you haven't found anything to help you in the documentation. o freetype-devel@nongnu.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.
This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.