Manual

tro be hoot na
When the Screen
is exposed to
direct sunlight
during recording,
the Screen turns
red or black for an
instant.
During recording,
the date/time does
not display.
The beep sound is •
not heard. •
There is a
time difference
between the point
where you press •
Recording start!
stop button and
the point where
the recorded video
Starts?st0psl
The recording
stops. •
You cannot record •
a photo image,
• Do not leave the camcorder with the LCD screen exposed to direct
sunlight.
• "Date/Time Display" to on. -page 85
Set the "Beep Sound" to "On."
The beep sound is temporally off while recording videos.
When the Audio/Video cable jack is connected to the camcorder, the
beep sound will automatically turn off.
On your camcorder, there may be a slight time delay between the
point when you press Recording start/stop button and the actual point
where the recorded video starts/stops. This is not an error.
The internal temperature of your camcorder is unusually high. Turn off
your camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off
your camcorder and leave it for about 1 hour in a cool place.
Set your camcorder to Record mode. -page 24
Release the lock on the write-protection tab of the memory card if set.
The storage media is full.
Use a new memory card or format the storage media. -page 81
Remove unnecessary images. '-page 70