Manual

Anti-Shake(HDIS)

Use the Anti--Shake (HDIS) function to compensate for unstable images caused by shaking movements when

holding the camcorder.

Select the Record ( _ / I_ ) mode by pressing the MODE button. '-,page 24

1. Press the MENU button _ Control joystick ('q/_) _ "Anti-Shake

(HDIS)."

2. Select the desired submenu item with the Control joystick (i/T),

and then press the OK button.

3. Press the MENU button to exit the menu.

1_!11i11i_ti11_IiF.111_

"Off" Disable the function.

.. The Anti-Shake (HDIS) function is enabled to

!!un" Icompensate for shaking movements.

!;lTii!iii!i!@!!!_!_i¸

Use the Anti-Shake function in the following cases:

• Recording when using the zoom exteneiw_ly

• Recording a close up picture of a small object

• Recording while walking, or moving

• Recording through the window, from inside a vehicle

• The SMART AUTO mode automaticaNy sets the Anti--Shake (HDIS) to On.

• Gross camcorder shake may not be entirely corrected even if "Anti-Shake (HDIS): On" is set.

Firmly hold the camcorder with both hands.

• When this function is set to "On," the actual movement of the subject and the movement

displayed on the screen may be slightly different.

• When recording in dark lighting at high magnification with this function set to "On," may cause

afterimages. In this case, we recommend using a tripod (not supplied) and turning the "Anti-Shake

(HDIS)" to "Off."