User Manual Memory Camcorder www.samsung.com/register For video recording, use a memory card that supports faster write speeds. - Recommended Memory Card: 4MB/s (Class 4) or above.
Before reading this user manual SAFETY WARNINGS IMPORTANT INFORMATION ON USE What the icons and signs in this user manual mean; Safety Icon Meaning There is a potential risk of death or serious injury. WARNING CAUTION There is a potential risk of personal injury or damage to the product. To reduce the risk of fire, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions.
Before reading this user manual The following terms are used in this manual: • ‘Scene’ refers to the point where you press the [Recording start/stop] button to start recording until you press again to stop recording. • The terms ‘photo’ and ‘still image’ are used interchangeably with the same meaning. Before using this camcorder • This camcorder records video in H.264 (MPEG4/AVC) format.
Safety information The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully. WARNING Means that there is a potential risk of serious personal injury. Prohibited action. Do not touch the product. CAUTION Means that there is a potential risk of personal injury or damage to the product. Do not disassemble the product. Unplug from the power supply. This precaution must be followed.
Safety information d flui ng ani cle Do not use the power adaptor if it has damaged, split or broken cords or wires. Doing so may cause fire or electric shock. Do not connect the power adaptor unless the plug can be fully inserted with no part of the blades exposed. Do not dispose of battery in a fire as it may explode. Never use cleaning fluid or similar chemicals to clean the camcorder. Do not spray cleaners directly on the camcorder.
Safety information CAUTION Do not drop or expose the camcorder, battery, power adaptor or other accessories to severe vibrations or impact. This may cause a malfunction or injury. Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact. Do not use the camcorder near direct sunlight or heating equipment. This may cause a malfunction or injury. Do not leave the camcorder in a closed vehicle for a long time where the temperature is very high.
Safety information Do not hold the camcorder by the LCD screen when lifting it. The LCD screen could detach and the camcorder may fall. Do not use the camcorder near a TV or radio. Interference from the camcorder could cause noise on the TV or in the radio broadcast. Do not use the camcorder near sources of strong radio waves or magnetic fields such as speakers and large motors. Noise from these sources could distort the video or audio you are recording. Use Samsung-approved accessories only.
Contents Before reading this user manual ....................... 2 SAFETY WARNINGS ..................................................................... 2 PRECAUTIONS ............................................................................. 2 IMPORTANT INFORMATION ON USE ........................................... 2 Safety information ............................................ 4 Quick start guide ........................................... 10 Getting to know the camcorder ......................
Contents Focus .......................................................................................... 57 Anti-Shake(HDIS) ......................................................................... 59 Digital Special Effect .................................................................... 60 Zoom Type .................................................................................. 61 Cont. Shot ................................................................................... 62 Time Lapse REC .....
Quick start guide This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information. STEP 1: Get ready STEP 2: Record videos and photos 1 Insert the battery into the battery slot. ¬page 19 1 Open the LCD screen and press the [Power ( )] button to turn on the camcorder. • Set the [Lens cover open/close] switch to open ( ). ¬page 15 2 Charge the battery fully. ¬page 20 2 3 Insert a memory card.
Quick start guide STEP 3: Play back videos or photos Viewing on a TV Viewing videos or photos on the LCD screen You can enjoy detailed, brilliant quality videos on a connected TV. ¬pages 77~78 You can find recordings quickly by using the thumbnail view. CARD 1 Press the [MODE] button to select the playback ( 2 Select the video or photo thumbnail view by using the [Zoom] lever.
Quick start guide Importing and viewing videos/photos from the camcorder to your PC 1 2 Start the Intelli-studio programme by connecting the camcorder to your PC with a USB cable. • A new file saving screen appears with the Intelli-studio main window. Click Yes, and the uploading procedure starts. Any new files are saved to your PC and registered to Contents Manager in the Intelli-studio programme. • You can arrange the files by different criteria such as Face, Date, Location, etc.
Getting to know the camcorder Checking your accessories WHAT'S INCLUDED WITH YOUR CAMCORDER Your new camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Centre.
Getting to know the camcorder LOCATION OF CONTROLS Front & Left 1 8 9 10 11 12 1 Lens 2 MENU button 3 Control (Up/Down/Left/Right/OK) button / Zoom (T/W) button 4 Recording start/stop button 5 LCD screen 6 Memory card/Jack cover ⓐ USB jack ( ) ⓑ Memory card slot ⓒ AV jack (AV) ⓓ CHG (charging) indicator 7 Internal speaker 8 Display ( 9 Recording pause/resume ( 10 Back light ( 11 SMART AUTO ( 12 Power ( 2 3 4 5 6 CA RD ⓐⓑⓒⓓ 14 7 ) button ) button ) button / SMART BGM but
Getting to know the camcorder Right/Top & Bottom Rear 1 2 9 3 1 7 2 6 3 4 5 1 MODE button 2 Zoom lever (T/W) 3 8 1 Mode indicator : Recording mode (Video/Photo) : Playback mode PHOTO button 2 Recording start/stop button 4 Strap 3 Battery slot 5 Strap hook 6 Lens cover open ( 7 Internal microphone 8 Battery release switch (BATT.) 9 Tripod receptacle ) /close ( ) switch Be careful not to cover the internal microphone and lens during recording.
Getting to know the camcorder IDENTIFIYING THE SCREEN DISPLAYS The available functions vary depending on the selected operation mode. Different indicators appear depending on the setting values. • The On Screen Display (OSD) below appears when the camcorder is in the recording ( • Press the [MODE] button to select the recording ( ) mode. ¬page 26 ) mode only. Video and Photo recording mode STBY 0:00:00 1 Sec/ 24 Hr [254Min] Left of the LCD screen Indicator / 1/50 STBY / z / / +0.
Getting to know the camcorder • The On Screen Display (OSD) below appears in the video playback ( ) mode only. • Press the [MODE] button to select the playback ( ) mode.
Getting to know the camcorder • This On Screen Display (OSD) below appears in the photo playback ( ) mode only. • Press the [MODE] button to select the playback ( ) mode.
Getting started INSERTING/EJECTING THE BATTERY To eject the battery To insert the battery Insert the battery into the battery slot until it softly clicks. • Make sure that the SAMSUNG logo on the battery is facing you when the camcorder is placed as shown in the figure. 1 Gently push the [Battery release (BATT.)] switch in the direction shown in the figure to eject the battery. 2 Push down, and then lift the battery out in the direction shown in the figure. [Battery release (BATT.
Getting started CHARGING THE BATTERY 1 Insert the battery into the camcorder. ¬page 19 You can charge the battery with the USB cable and power adaptor. 2 Open the jack cover of the camcorder. 3 Charge the battery using the USB cable and power adaptor. • The CHG (charge) indicator lights up and charging starts. When the battery is fully charged, the charging (CHG) indicator turns green. ¬page 21 Make sure that you use the supplied USB cable or power adapter to charge the battery.
Getting started Battery level display CHECKING THE BATTERY STATE You can check the charging state and remaining battery capacity. The battery level display shows the amount of battery power remaining in the battery. To check the charging state The colour of the CHG lamp indicates the charging state.
Getting started Available charging and running time for the battery Battery Type IA-BP105R IA-BP210R To charge the battery with the power adaptor approx. 160 min. approx. 300 min. To charge the battery by connecting to a PC approx. 160 min. approx. 300 min. Charging time Resolution HD SD HD SD Continuous recording time approx. 100 min. approx. 80 min. approx. 200 min. approx. 160 min. Playback time approx. 200 min. approx. 400 min.
Getting started About the battery • Battery properties A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 10ºC (50ºF)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder. • Make sure to store the battery separately after use. - A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.
Basic operation of the camcorder TURNING YOUR CAMCORDER ON/OFF SWITCHING TO THE POWER SAVING MODE 1 If you need to use camcorder for the extended time, the following functions enable you to prevent unnecessary energy consumption. 2 Open the LCD screen and press the [Power ( )] button to turn on the camcorder. • Set the [Lens cover open/close] switch to open ( ). To turn off the camcorder, press the [Power ( )] button.
Basic operation of the camcorder SETTING THE DATE/TIME FOR THE FIRST TIME You can set the date and time of your local area when you turn on this camcorder for the first time. Internal rechargeable battery • Your camcorder includes a internal rechargeable battery that retains the date and time settings even after the power is turned off. • Once this battery is depleted, the current date/time values are all reset to defaults, and you need to recharge the internal rechargeable battery.
Basic operation of the camcorder SETTING THE OPERATION MODES You can switch the operation mode in the following order each time you press the [MODE] button. ) Q Playback mode ( ) Recording mode ( • Each time the operation mode changes, the respective mode indicator light turns on. Mode Indicator Functions SWITCHING THE INFORMATION DISPLAY MODE You can switch the on-screen information display mode. Press the [Display ( )] button. • The full and minimum display modes will alternate.
Basic operation of the camcorder USING THE SHORTCUT MENU (OK GUIDE) 2 The shortcut menu (OK guide) represents the most frequently accessed functions for the selected mode. Pressing the [Control (OK)] button will display the shortcut menu of frequently used functions on the LCD screen. An example: Setting EV (Exposure Value) in the recording mode using the shortcut menu (OK guide). 3 Press the [Control (Left)] button to select EV function.
Basic operation of the camcorder SHORTCUT FUNCTION USING THE CONTROL BUTTONS Button Playback ( Recording ( ) mode Video playback ( ) mode ) mode Menu selection Photo playback ( ) mode Confirms selection OK - Access the shortcut menu - Confirm selection - Exit the shortcut menu - Access the shortcut menu - Playback / Pause - Access the shortcut menu - Playback zoom - iSCENE - Zoom (tele) Increases the volume - Moves the cursor up - Focus - Zoom (wide) Decreases the volume - Moves the curs
Basic operation of the camcorder SELECTING THE LANGUAGES Submenu items You can select a language to appears on the LCD screen. 1 2 3 4 Press the [MENU] button p [Control (Left/Right)] button p Settings. English STBY Settings Deutsch Italiano Español Português Nederlands Svenska Language Exit Suomi Norsk Dansk STBY Polski Čeština Slovensky [254Min] Settings Press the [Control (Up/Down)] button to select the desired OSD language, and then press the [Control (OK)] button.
Getting ready to start recording INSERTING AND EJECTING A MEMORY CARD (NOT SUPPLIED) CAR D CAR D To insert a memory card To eject a memory card 1 Turn the camcorder off. 1 Turn the camcorder off. 2 Open the memory card cover as shown in the figure. 2 Open the memory card cover as shown in the figure. 3 Insert the memory card into the card slot until it softly clicks. • Make sure that the camcorder is placed as shown above and the terminal portion of the card is facing up.
Getting ready to start recording SELECTING A SUITABLE MEMORY CARD (NOT SUPPLIED) Compatible memory cards • You can use SD, SDHC, and SDXC cards with this camcorder. We recommend you use an SDHC card. This camcorder supports SD cards up to 2GB. We cannot guarantee normal operation with SD cards bigger than 2GB. • MMC (Multi Media Card) and MMC Plus are not supported.
Getting ready to start recording Handling a memory card • Damaged data may not be recoverable. We recommend you make a back-up of important data separately on the hard disk of your PC. • Turning the power off or removing a memory card during an operation such as formatting, deleting, recording, and playback may cause data loss. • If you modify the name of a file or folder stored in the memory card with your PC, your camcorder may not recognise the modified file.
Getting ready to start recording RECORDABLE TIME AND CAPACITY Recordable time available for video Storage media capacity Resolution 1GB 2GB 4GB 8GB 16GB 32GB 64GB 1280X720/25p 13 27 55 110 220 440 890 720X576/50p (16:9) 13 27 55 110 220 440 890 720X576/50p (4:3) 13 27 55 110 220 440 890 (Unit: Approximate minutes of recording) Recordable number of photos • The figures in the table may differ depending on the actual recording conditions and subject.
Getting ready to start recording ATTACHING THE STRAP ADJUSTING THE LCD SCREEN Adjust the length of strap so that the camcorder is stable when you press the [Recording start/stop] button with your thumb. The wide LCD screen on your camcorder offers high quality image viewing. If you adjust the strap too tightly and use excessive force to insert your hand, the strap hook of the camcorder may be damaged. 1 Open the LCD screen with your finger. • The screen opens up to 90°.
Basic recording RECORDING VIDEOS 1 Set the desired resolution before recording. ¬page 52 • Insert a memory card. ¬page 30 • Open the Lens cover by using the [Lens cover open/close] switch. ¬page 15 • Press the [Power ( )] button to turn on the camcorder. • Select the recording ( ) mode by pressing the [MODE] button. ¬page 26 This camcorder features two [Recording start/stop] buttons. One is on the rear side of the camcorder and the other is on the LCD screen. Select the one that works best for you.
Basic recording • For on-screen information display, see pages 16~18. • For approximate recording times, see page 33. • Eject the battery when you have finished recording to prevent unnecessary battery power consumption. • For various functions available when you record videos, see pages 51~65. • During recording, some button operations are unavailable. ([MODE] button, [MENU] button, etc.) • Sound is recorded from the internal stereo microphone on the top-front of the camcorder.
Basic recording 2 CAPTURING PHOTOS DURING VIDEO RECORDING Your camcorder can capture photos without interrupting video recording. 3 While recording the video, frame the scene you want to photograph, and then press the [PHOTO] button. • This camcorder records the photo image without a shutter sound. • Video keeps recording, even while you take photos. Press the [Recording start/stop] button. • The recording (z) indicator appears and recording starts.
Basic recording RECORDING PHOTOS Set the desired resolution before recording. ¬page 53 • Insert a memory card. ¬page 30 • Open the Lens cover by using the [Lens cover open/close] switch. ¬page 15 • Press the [Power ( )] button to turn on the camcorder. • Select the recording ( ) mode by pressing the [MODE] button. ¬page 26 2 Adjust the subject at the centre of the LCD screen. 3 Fully press the [PHOTO] button. • The shutter sound is heard (when Shutter Sound: On is set).
Basic recording RECORDING WITH EASE FOR BEGINNERS (SMART AUTO) Scene icons Meaning Appears when recording a night scene. User-friendly SMART AUTO optimises your camcorder to the recording conditions automatically, providing beginners with the best performance. Appears when recording with a very bright background. Appears when recording indoors. Appears when recording a close-up. Appears when recording a landscape. Appears when recording a portrait. Appears when recording a portrait outdoors at night.
Basic recording ZOOMING IN/OUT W: Wide-angle T: Telephoto Use the zoom function for close-up or wide-angle recording. This camcorder allows you to record using 52x optical power zoom, 65x Intelli-zoom and 130x digital zoom. To zoom in Slide the [Zoom] lever towards [T] (telephoto). (Or press the [Control (Up)] button on the LCD screen.) • The distant subject is gradually magnified. To zoom out Slide the [Zoom] lever towards [W] (wide-angle). (Or press the [Control (Down)] button on the LCD screen.
Basic recording USING THE BACK LIGHT BUTTON When a subject is lit from behind, this function compensates for lighting so that the subject is not too dark. Press the [Back light ( between On and Off. )] button to toggle the back light mode Back lighting influences recording when the subject is darker than the background: • • • • • The subject is in front of a window. The subject is against a snowy background. The subject is outdoors and the background is overcast. The light sources are too bright.
Basic playback CHANGING THE PLAYBACK MODE • You can switch to the playback mode by pressing the [MODE] button. • The recorded videos or photos appears in thumbnail view and the most recently created file is highlighted in the thumbnail view. • The camcorder selects the thumbnail display options based on the standby mode you used the last time. However, you can choose the video or photo thumbnail view display options by using the [Zoom] lever.
Basic playback PLAYING BACK VIDEOS 2 Use the [Control (Up/Down/Left/ 0:00:00/0:00:55 Right)] button to select the desired videos, and then press the [Control (OK)] button. • The camcorder plays back the Thumbnail View 100-0001 video you selected and the shortcut menu for playback appears for a short time. • The selected videos play back according to the PlayOption setting. ¬page 67 3 To stop playback and return to the thumbnail view, use the [Zoom] lever.
Basic playback Skip playback Various playback operations • During playback, press the [Control (Right)] button to locate the start point of the next file. Pressing the [Control (Right)] button repeatedly skips files in the forward direction. • During playback, press the [Control (Left)] button to locate the start point of the current file. Pressing the [Control (Left)] button repeatedly skips files in the reverse direction.
Basic playback USING THE SMART BGM FUNCTION You can enjoy music during video playback. If the original sound in the video is big, the background music will be decreased naturally. On the other hand, if the original sound in the video is small, the background music will be increased naturally. This function works only in the video playback ( ¬page 26 CAPTURING PHOTOS WHILE PLAYING BACK VIDEO You can capture photos during video playback. ) mode. 1 Select the video thumbnail view.
Basic playback VIEWING PHOTOS 2 Use the [Control (Up/Down/ 1/10 Left/Right)] button to select the desired photos, and then press the [Control (OK)] button. • The camcorder displays the Thumbnail View 100-0001 photo you selected in full screen view and the shortcut menu for playback appears for a short time. • To view the previous/next photo, press the [Control (Left/ Right)] button. 3 To return to the thumbnail view, use the [Zoom] lever.
Basic playback ZOOMING DURING PHOTO PLAYBACK 3 Press the [Control (Up/Down/ Left/Right)] button to view the area you want on the magnified photo. 4 To cancel, use the [Zoom] lever. You can magnify a playback image. x1.5 Exit 1/10 100-0001 • Photos recorded on other devices or those edited on a PC cannot be magnified. • While you are using the playback zoom, you cannot select other images. 1 Select the photo you want to magnify. ¬page 46 2 Adjust the magnification with the [Control (OK)] button.
Using the menu items HANDLING MENUS 3 Press the [Control (Up/Down)] button to select the desired submenu item, and then press the [Control (OK)] button. The instructions below are examples of how to access and use menu items using the [MENU] button. When you access and use other menu items, use these examples as guides. 4 When you finish making settings, press the [MENU] button to exit. Press the [MODE] button to select the recording ( ¬page 26 48 1 Press the [MENU] button.
Using the menu items MENU ITEMS • The items available in each menu vary depending on the operation mode. • For item operation details, see the page number listed under Page in the table.
Using the menu items M : Accessible : Not accessible Setting menu items Items Playback mode (Thumbnail view) Playback mode (Single view) Video Photo Video Photo Default values Page Storage Info M M M M M - 71 File No.
Advanced recording iSCENE Submenu Items This camcorder automatically can set the shutter speed and aperture according to the subject and brightness for optimum recording. Select the recording ( button. ¬page 26 1 2 3 ) mode by pressing the [MODE] Items Auto Sports Press the [MENU] button p [Control (Left/Right)] button p iSCENE. STBY Portrait iSCENE Auto Sports Select the desired submenu item with the [Control (Up/Down)] button, and then press the [Control (OK)] button.
Advanced recording Video Resolution You can select the resolution of a video to be recorded. Select the recording ( button. ¬page 26 1 2 3 ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p Video Resolution. STBY [254Min] Video Resolution 1280X720/25p 720X576/50p(16:9) Select the desired submenu item with the [Control (Up/Down)] button, and then press the [Control (OK)] button. 720X576/50p(4:3) Exit Press the [MENU] button to exit the menu.
Advanced recording Photo Resolution White Balance You can select the quality of photo images to be recorded. Using the White Balance function, you can select a setting that matches the light illuminating the subject you are shooting (Daylight, Fluorescent, etc.) or let the camcorder make all adjustments automatically. Based on your selection, the camcorder automatically adjusts the colour of the subject so the colours in your recording look natural. Select the recording ( button.
Advanced recording To set the white balance manually Submenu items Items Auto 54 Use To let the camcorder adjust the white balance automatically according to the lighting conditions. Daylight For recording in clear, outdoor lighting. Cloudy For recording in the shade or cloudy weather. Fluorescent For recording under white fluorescent lights. Tungsten For recording under halogen lamps and incandescent lights.
Advanced recording Face Detection Examples of the Face detection mode Face Detection detects and recognises face-like shapes and adjusts focus, colour, and exposure automatically. Also, it adjusts recording conditions so that they are optimised for the face detected. When you set Face detection to On, the face detection frame appears around faces as shown in the figure below. The camcorder can detect up to three faces. STBY Select the recording ( button.
Advanced recording EV (Exposure Value) Understanding EV (Exposure Value) The camcorder usually adjusts the exposure automatically. You can also manually adjust the exposure to your preference. Select the recording ( button. ¬page 26 1 2 ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p EV. STBY [254Min] EV Adjust Press the [Control (OK)] button.
Advanced recording C.Nite Focus You can adjust the shutter speed when recording a slow moving object or a brighter image in dark places without compromising colours. When you turn the camcorder on, focus is always set to automatic. You can also set the focus manually. Select the recording ( button. page 26 1 Press the [MENU] button [Control (Left/Right)] button C.Nite.
Advanced recording Adjusting the focus manually Examples of the Manual focus mode This camcorder automatically focuses subjects from close-up to infinity. However, the correct focus may not be obtained depending on the recording conditions. In this case, use the manual focus mode. 1 2 Press the [Control (Up/Down)] button to select Manual. • The manual focus adjustment indicator appears.
Advanced recording Anti-Shake(HDIS) Use the Anti-Shake function in the following cases Use the Anti-Shake(HDIS) function to compensate for unstable images caused by shaking movements while holding the camcorder. Select the recording ( button. ¬page 26 1 2 3 ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p Anti-Shake(HDIS). Select the desired submenu item with the [Control (Up/Down)] button, and then press the [Control (OK)] button.
Advanced recording Digital Special Effect Examples of 7 digital effect options Using the digital special effect function gives your recording a creative look. Select the recording ( button. ¬page 26 1 2 3 Off Disables the function. ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p Digital Special Effect. STBY Digital Special Effect Off Blk&Wht Select the desired submenu item with the [Control (Up/Down)] button, and then press the [Control (OK)] button.
Advanced recording Zoom Type Digital zoom range The camcorder offers three types of zoom: optical, intelligent, and digital zoom. STBY [254Min] 9999 Select the recording ( button. ¬page 26 1 2 3 ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p Zoom Type. STBY 1/50 [254Min] Zoom Type The right side of the bar shows the digital zooming zone. The zooming zone appears when you move the [Zoom] lever or [Zoom] button.
Advanced recording Cont. Shot Submenu Items The Continuous Shot function allows you to capture photos in rapid succession to give you more photo-taking opportunities when recording moving subjects. Items Off Select the recording ( button. ¬page 26 1 2 3 62 ) mode by pressing the [MODE] Press the [MENU] button p [Control (Left/Right)] button p Cont. Shot. STBY Cont. Shot Off On Select the desired submenu item with the [Control (Up/Down)] button, and then press the [Control (OK)] button.
Advanced recording Time Lapse REC 4 Using the Time Lapse feature, you can programme your camcorder to create a time lapse video by recording a series of frames over a set period of time with a set time interval between each frame. The Time Lapse feature lets you create time lapse videos of blooming flowers and similar subjects. Move to the next setting (Hr) by pressing the [Control (Left/ Right)] button, and then set the desired total recording time in the same way.
Advanced recording Example of Time Lapse Recording Total time for recording Recording interval Timeline The Time Lapse Recording function records image frames at a predefined interval over the total recording time to produce a time-lapse video.
Advanced recording Guideline Submenu Items This camcorder provides 3 types of guidelines to help you to set a balanced image composition on the screen. Items Off Select the recording ( button. ¬page 26 1 2 3 ) mode by pressing the [MODE] Cross Grid Press the [MENU] button p [Control (Left/Right)] button p Guideline. STBY Guideline Off [254Min] Safety Zone Use To cancel the guideline function. On-screen display - Use when focusing a subject in the centre.
Advanced playback Thumbnail View Option Normal The Thumbnail View Option lets you sort thumbnails of the recorded videos or photos by different display options. ) mode. • Press the [MODE] button to select the playback ( ¬page 26 • Select the video or photo thumbnail view. ¬page 42 1 2 Press the [MENU] button p [Control (Left/Right)] button p Thumbnail View Option.
Advanced playback PlayOption Smart BGM Option You can set a specific playback style according to your preference. You can play back a video with background music by selecting the desired background. • Press the [MODE] button to select the playback ( ¬page 26 • Select the video thumbnail view. ¬page 42 1 2 3 Press the [MENU] button p [Control (Left/Right)] button p PlayOption. ) mode.
Advanced playback 4 Delete You can erase your recordings one by one or all at once. ) mode. • Press the [MODE] button to select the playback ( page 26 • Select the video or photo thumbnail view. page 42 1 2 3 68 Press the [MENU] button [Control (Left/Right)] button Delete. Select an option by pressing the [Control (Up/Down)] button, and then press the [Control (OK)] button. Normal Delete Select Files If you selected All Files, the message corresponding to the selected option will appear.
Advanced playback Protect You can protect important saved videos or photos from accidental deletion. You cannot delete protected images unless you release the protection or format the memory. ) mode. • Press the [MODE] button to select the playback ( ¬page 26 • Select the video or photo thumbnail view. ¬page 42 4 If you selected All On, the message corresponding to the selected option will appear. Use the [Control (Left/Right)] button to select Yes, and then press the [Control (OK)] button.
Advanced playback Slide Show File Info You can enjoy a slide show with various effects. You can see the image information for all images. • Press the [MODE] button to select the playback ( ¬page 26 • Select the photo thumbnail view. ¬page 42 1 2 3 Press the [MENU] button p [Control (Left/Right)] button p Slide Show. Select an option by pressing the [Control (Up/Down)] button, and then press the [Control (OK)] button. ) mode.
Other settings Storage Info File No. Storage Info displays the storage information for the storage media. The camcorder assigns file numbers to recorded files in the order they were recorded. 1 2 Press the [MENU] button p [Control (Left/Right)] button p Settings p [Control (Up/ Down)] button p Storage Info p [Control (OK)] button. • Press the [Control (Up/Down)] button to move the screen up or down and view additional information.
Other settings Date/Time Set Date/Time Display By setting the date and time, you can display the date and time of a recording during playback. You can set whether or not the date and/or time appear on the LCD screen. 1 1 2 3 Press the [MENU] button p [Control (Left/Right)] button p Settings p [Control (Up/Down)] button p Date/Time Set p [Control (OK)] button.
Other settings LCD Brightness Auto LCD Off You can adjust the brightness of the LCD screen to compensate for ambient lighting conditions. To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is idle for more than 2 minutes. 1 2 Press the [MENU] button p [Control (Left/Right)] button p Settings p [Control (Up/Down)] button p LCD Brightness p [Control (OK)] button.
Other settings Beep Sound Shutter Sound When Beep Sound is on, the camcorder sounds a beep when you press a button. You can turn the shutter sound the camcorder emits when you press the [PHOTO] button on or off. 1 1 2 3 Press the [MENU] button p [Control (Left/Right)] button p Settings p [Control (Up/Down)] button p Beep Sound p [Control (OK)] button.
Other settings Auto Power Off PC Software You can set your camcorder to turn off automatically if it is idle for 5 minutes without an operation. This function will prevent unnecessary power consumption. If you set PC Software to On, you can use the built-in PC software easily by connecting a USB cable between the camcorder and your PC. Using the software, you can download stored video and photo images on the camcorder to your PC’s hard disk. You can also edit video and photo files using the PC software.
Other settings Format Default Set Use the Format function if you want to delete all files completely or to correct problems on the storage media. You can restore all menu settings to their defaults. 1 Insert a memory card. ¬page 30 1 2 Press the [MENU] button p [Control (Left/Right)] button p Settings p [Control (Up/Down)] button p Format p [Control (OK)] button.
Connecting to a TV CONNECTING TO A TV (16:9/4:3) You can view images recorded with your camcorder on a regular TV that supports standard definition. This camcorder supports the composite output for standard definition video transfer. Stereo Type AUDIO R VIDEO Mono Type AUDIO VIDEO L White Red Yellow Yellow TV White Camcorder CARD Signal flow Audio/Video cable Connecting an Audio/Video cable for the composite output 1 Connect the camcorder to a TV with an Audio/Video cable.
Connecting to a TV VIEWING ON A TV SCREEN Image display depending on LCD and TV screen ratio Recording ratio Appearance on Wide Screen (16:9) TV Appearance on 4:3 TV Images recorded in a 16:9 ratio CARD Images recorded in a 4:3 ratio Adjust the volume to a moderate level. If the volume is too high, the video may include the noise.
Dubbing videos DUBBING TO VCR OR DVD/HDD RECORDERS You can dub images recorded on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. • Videos are dubbed to the other recording device via analogue data transfer. (composite connection) Use the supplied Audio/ Video cable. • Use the power adaptor to power the camcorder when you dub to a VCR or DVD/HDD recorder. VCRs or DVD/ HDD recorders Camcorder 1 Insert the storage media in the recording device.
Using with a windows computer WHAT YOU CAN DO WITH A WINDOWS COMPUTER You can perform the following functions by connecting your camcorder to your Windows computer with a USB cable and using the Intelli-studio editing software built into your camcorder. System Requirements Your computer must meet the following requirements to run Intellistudio: Items Microsoft Windows XP SP2, Windows Vista, or Windows 7 CPU Intel® Core 2 Duo® 1.66 GHz or higher is recommended AMD Athlon™ X2 Dual-Core 2.
Using with a windows computer USING THE Intelli-studio PROGRAMME Intelli-studio is a built-in programme that allows you to play back and edit files. You can upload files to web sites, such as YouTube or Flickr. 3 Click Yes in the new file saving window. The uploading procedure starts. Click Yes to confirm. • If you do not want to save any new files, select No. Step 1. Connecting the USB cable 1 Set PC Software to On. • This is the default setting.
Using with a windows computer Step 2. About the Intelli-studio main window For details, select Help Help on the Intelli-studio screen. When the Intelli-studio starts up, video and photo thumbnails appear in the main window. 1 2 3 4 5 6 7 No. Description 1 Menu items 2 Display files in the selected folder. 3 Switch to Photo edit mode. 4 Switch to Video edit mode. 5 Switch to Share mode. 6 Enlarge or reduce the thumbnails in the list. 0 7 Select a file type.
Using with a windows computer Step 3. Playing back videos or photos You can play back the recordings conveniently using the Intellistudio application. 1 2 With Intelli-studio, click the desired folder to display your recordings. • Video or photo thumbnails appear on the screen, depending on the folder you selected. Choose the video or photo that you want to play back. Step 4. Editing videos or photos You can edit the videos or photos in various ways with various functions.
Using with a windows computer Step 5. Sharing the videos/photos online 4 Share your contents with the world by uploading photos and videos directly to a web site with one click. 1 Choose the videos or photos you want to share. 2 Click Share ( ) on the Intelli-studio browser. • The selected file appears in the sharing window. Click Upload to start uploading. • A pop-up window appears to open the web browser of the selected site or a pop-up window appears asking for your ID and password.
Using with a windows computer USING AS A REMOVABLE STORAGE DEVICE You can transfer recorded data to a Windows computer by connecting the USB cable to the camcorder. Viewing and transferring the contents of storage media 1 Set PC Software to Off. ¬page 75 2 Insert a memory card. ¬page 30 3 Connect the camcorder to the PC with the USB cable. ¬page 81 • The Removable Disk or Samsung window appears on the PC’s screen after a moment.
Using with a windows computer Structure of folders and files on the storage media • The folder and file structure for the storage media is as follows. • Do not arbitrarily change or remove the folder or file name. It may not be playable. Videos (H.264) y • HD-quality videos have an HDV_####.MP4 name format. • SD-quality videos have an SDV_####.MP4 name format. • The file number automatically increases when a new video clip file is created. • Up to 9,999 files can be stored in one folder.
Troubleshooting WARNING INDICATORS AND MESSAGES Before contacting a Samsung authorised service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call. Power source Message Icon Informs that... Action Low Battery - The battery is almost discharged. • Replace with a charged battery or use the power adaptor. • Charge the battery. Check authenticity of the battery. - The battery failed to authenticate. • Check the battery’s authenticity.
Troubleshooting Storage media Message Icon Informs that... Action Not Supported Card The memory card is not supported in this camcorder. • Change to the memory card that we recommended. Please format The memory card is not formatted. • Format the memory card using the menu. The memory card is not fast enough to record at this resolution. • Record video at a lower resolution. • Change the memory card to a faster one. ¬page 32 Low speed card. Please record a lower resolution.
Troubleshooting Recording Message Icon Informs that... File number is full. Cannot record video. - Folder and file number have reached the maximum number and you cannot record. • Set File No. to Reset and format the storage media. Remember to back up important files before formatting. File number is full. Cannot take a photo. - Folder and file number have reached the maximum number and you cannot record. • Set File No. to Reset and format the storage media.
Troubleshooting SYMPTOMS AND SOLUTIONS If these instructions do not solve your problem, contact the nearest Samsung authorised service centre. Power Symptom The camcorder does not turn on. Explanation/Solution • • • • The battery may not be installed on your camcorder. Insert a battery into the camcorder. The inserted battery may be discharged. Charge the battery or replace it with a charged one. If you use a power adaptor, make sure it is properly connected to the wall outlet.
Troubleshooting Displays Symptom Explanation/Solution Unknown indicator appears on the screen. • A warning indicator or message appears on the screen. ¬pages 87~89 An afterimage remains on the LCD screen. • This occurs if you disconnect the power adaptor or remove the battery before turning the power off. The image on the LCD screen looks dark. • Ambient light is too bright. Adjust the brightness and angle of the LCD.
Troubleshooting Recording Symptom 92 Explanation/Solution Pressing the [Recording start/stop] button does not start recording. • There is not enough free space to record on the storage media. • Make sure the memory card is inserted and write-protect tab is set to unlock. • The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a while in a cool place. • Your camcorder is damp and moist inside (condensation).
Troubleshooting Recording Symptom Explanation/Solution When the screen is exposed to direct sunlight during recording, the screen turns red or black for an instant. • Do not expose the LCD screen to direct sunlight. During recording, the date/time does not appear. • Set Date/Time Display to on. ¬page 72 The beep sound is not heard. • Set the Beep Sound to On. • The beep sound is temporally off while the camcorder records videos.
Troubleshooting Adjusting the image during recording Symptom Explanation/Solution Focus does not adjust automatically. • Set Focus to Auto. ¬page 57 • The recording conditions are not suitable for auto focus. Adjust the focus manually. ¬page 57 • The lens is dusty on the surface. Clear the lens and check the focus. • You are recording in a dark place. Increase the brightness. The image appears too bright or flickering, or changes in colour.
Troubleshooting Connecting to a computer Symptom Explanation/Solution When accessing videos, a computer does not recognise your camcorder. • Disconnect the USB cable from the computer and camcorder, restart the computer, then reconnect it correctly. Cannot play back a video file properly on a PC. • You need to install a video codec on the PC to play back the files recorded by your camcorder. Install or run the internal edit software (Intelli-studio).
Troubleshooting Dubbing with other devices Symptom You cannot dub correctly using the Audio/Video cable. Explanation/Solution • The Audio/Video cable is not connected properly. Make sure that the Audio/Video cable is connected to the proper jacks, i.e. to the input jacks of the device used for dubbing an image from your camcorder. ¬page 79 General operations Symptom Explanation/Solution The date and time are incorrect.
Maintenance & additional information MAINTENANCE Cautions when storing • For safekeeping of the camcorder, turn off the camcorder. - Remove the battery and power adaptor. - Remove the memory card. • To clean the lens Use a blower brush to remove dust, and then wipe the lens gently with a soft cloth. If necessary, wipe gently with lens paper or tissue. - Mould may form if the lens is left dirty. - If the lens looks dim, turn off the camcorder and leave it off for about 1 hour.
Maintenance & additional information When there is dew condensation, put the camcorder aside for a while before using • What is dew condensation? Dew condensation happens when a camcorder is moved to a location where there is a significant temperature difference from the previous location. The dew condenses on the external or internal parts of the camcorder, and on the reflection lens.
Maintenance & additional information GLOSSARY AF (Auto Focus) A system that automatically focuses the camcorder lens on the subject. Your camcorder uses the contrast to focus automatically. Aperture The aperture controls the amount of light that reaches the camcorder’s sensor. Camcorder shake (Blur) If the camcorder is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow.
Specifications Model name System LCD screen Connectors General SMX-F70BP/SMX-F70SP/SMX-F700BP/SMX-F700SP Video signal PAL Picture compression format H.264/AVC Audio compression format AAC (Advanced Audio Coding) Image device 1/3.2” CMOS Effective pixels Approx. 920,000 pixels Total pixels Approx. 5 Mega pixels Lens 1.8 to 4.9, 52x (Optical), 65x (Intelli), 130x (Digital) Electronic zoom lens Focal length 2.1mm~109.2mm Size/dot number 2.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung camcorders, please contact the SAMSUNG customer care centre. Region North America Latin America Europe Contact Centre Web Site CANADA Country 1-800-SAMSUNG(726-7864) www.samsung.com Region BOSNIA Country MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com ARGENTINE 0800-333-3733 BRAZIL Contact Centre Web Site 05 133 1999 www.samsung.
Contact SAMSUNG WORLD WIDE Region Country SERBIA Asia Pacific Web Site Region Country Contact Centre Web Site www.samsung.com JAPAN 0120-327-527 www.samsung.com SLOVAKIA 0800 - SAMSUNG(0800-726 786) www.samsung.com/sk MALAYSIA 1800-88-9999 www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com PHILIPPINES Switzerland www.samsung.com/ch 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
Samsung Electronics Co., Ltd. 129, Samsung-Ro, Yeongtong-Gu, Suwon-Si, Gyeonggi-Do 443-742 Korea Samsung Electronics Euro QA Lab.
