Operation Manual

6. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
`
Refer to “FTP / E-mail” for more details. (page 111)
• E-mail : Specify the use of email transfer in the alarm input setup.
`
Refer to “FTP / E-mail” for more details. (page 111)
• Record : Specify the use of recording in the alarm input setup.
`
Set <Record> to <On> in <Storage>. (page 112)
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
• Goto preset : Moves to the specified preset location when setting the alarm input.
`
Only for SNB-6003/SNB-6004.
`
Only if the camera pan/tilt receiver is installed, Goto preset is available.
7. When done, click [Apply (
)].
English _121
● SETUP SCREEN