Operation Manual

Network disconnection
When the network is physically disconnected, it is considered as an event to be saved.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Network disconnection>.
3.
Set whether or not to
< Enable >
.
4. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page 120)
5. When done, click [Apply (
)].
App event
You can set the system to generate signals for the events defined on the application. The
event signals provided vary depending on the application function.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <App event>.
3. Set whether or not to <Enable>.
4. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”.
(page 120)
5. When done, click [Apply (
)].
English _133
● SETUP SCREEN