Operation Manual

English _35
● INSTALLATION & CONNECTION
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply (SNB-6003/SNB-6004)
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J
`
If PoE and DC 12V powers are both applied, the device will be operated by the initially applied
power source.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE802.3af protocols.
`
Be careful not to reverse the polarity when you connect the power cable.
`
AC24 can be connected in non-polar union.
`
If you want to connect an external device, you must turn off the external device before proceeding.
Power Supply (SND-6083/SND-6084)
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J
`
If both PoE and DC12V are applied simultaneously, the product will be supplied with power from
PoE.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE802.3af protocols.
- It is advisable to use only one power source from PoE and DC12V.
`
Be careful not to reverse the polarity when you connect the power cable.
`
If you want to connect an external device, you must turn off the external device before proceeding.