Operation Manual

setup screen
90_ setup screen
To Set Exposure (SND-6083)
You can adjust the exposure level of the camera.
1. Select <Exposure>.
2. Select each item and set it properly.
• Brightness : Adjust the screen
brightness.
• Minimum shutter : The limit of the
longest exposure time.
`
Shutter is the mode to set up the range of the sensor exposure time which will specify the upper
and lower limits for the electronic shutter movement.
`
The framerate may be reduced in the dark condition if Shutter has a lower value than specified in
the Sensor mode.
• Maximum shutter : The limit of the shortest exposure time.
• Anti flicker : It prevents screen flickering incurring from the dissonance between the
surrounding lighting and the frequency.
• SSNR : Select Able or Disable for the video noise elimination function.
• SSNR level : Adjust the noise reduction level.
• Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : The iris is automatically adjusted to the amount of the surrounding light.
- Manual : Open the iris as much as possible.
• AGC : Select AGC Control mode.
Adjust the gain value of the video (that, in particular, was recorded at a low
contrast scene and had a lower brightness level than normal) to control the video
brightness.
J
`
The image exposure can be saturated depending on the Shutter setup range.